• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.333-338
• /
• 2003

Polymeric composite structures used in ground transportation applications such as the carbody of tilting train may be exposed to a ground environmental conditions during long-term missions. In this study, the degradation of mechanical and physical properties of graphite/epoxy composite and glass fabric/phenol composite under ground environmental conditions was investigated. Accelerated environmental conditions of ultraviolet radiation, temperature, and moisture were considered. Several types of specimens were used to investigate the effects of environmental conditions on mechanical properties of the composites. Also, storage shear modulus, loss shear modulus, and tan 8 were measured as a function of exposure times through a dynamic mechanical analyzer. Finally, composite surfaces exposed to environmental conditions were examined using a scanning electron microscope.

• Textile Coloration and Finishing
• /
• v.8 no.3
• /
• pp.59-65
• /
• 1996

Cotton fabrics were treated by low temperature plasma and/or cellulase, and its physical and dyeing properties were investigated. All the pretreatments of the cotton with low temperature plasma of oxygen, nitrogen and argon slowed down the rate of weight loss of cotton in cellulase solution. Plasma pretreatment did not show any strength retention effect on cotton fiber in the subsequent cellulase treatment. Pretreatment of cotton with low temperature oxygen plasma decreased the rate of dyeing in direct dye bath, while cellulase or plasma/cellulase pretreatment increased the rate. Equilibrium dye uptake of cotton was not changed greatly by the pretreatments except the normal untreated cotton showed more or less high uptake. The pretreatment of cellulase with a water-soluble carbodiimide reduced the enzymatic activity, and did not show any strength retention of cotton in enzymatic weight loss.

• Textile Coloration and Finishing
• /
• v.32 no.3
• /
• pp.142-149
• /
• 2020

The purpose of this study was to investigate the dyeing properties of mugwort extract by nano-cellulose(n-cell). When dyeing cotton, rayon(artificial silk, called Ingyeon) and silk with mugwort extract, the difference with and without 2 wt% n-cell which it diluted to 0.6% treatment was compared. It was found that the addition of n-cell changed the values of L^∗, -a^∗(+red ~ -green), and b^∗(+yellow ~ -blue) of all scoured cotton, rayon and silk fabrics, compared to dyeing only mugwort extract. Furthermore, it was confirmed that the ΔE and the K/S value slightly increased in all of the dyed cotton, rayon, and silk fabrics treated with n-cell at the same time as dyeing compared to the untreated ones. Therefore, by treating the fabric with n-cell, a natural cellulose component, at the same time as dyeing, it is expected to maintain stable fastness, which is a disadvantage of dyeing using natural dyes, and contribute to the utilization and commercialization of other natural dyes.

• Textile Coloration and Finishing
• /
• v.12 no.6
• /
• pp.353-360
• /
• 2000

In this article, arrowroot is extracted in distilled water, and its dyeing properties on wool, nylon, and silk were investigated. Also the effect of mordanting (Al, Cu, Sn, Fe and Cr compounds) on the wash fastness are measured. The wavelength of maximum absorption of the arrowroot extract appears at 250 and 300nm below pH 7, but they shifted to longer wavelength at higher pH values. It appears that the optimum condition of the dyeing of wool, nylon, and silk fabric with arrowroot extract is $60^\circ{C}$, 60 min, and pH 4.0. Mordant treatments are effective in improving wash fastness of polyamide fabrics.

• Journal of Conservation Science
• /
• v.35 no.1
• /
• pp.1-10
• /
• 2019

This study provides a comprehensive evaluation of general characteristics of sized silk fabrics for the painting purpose. Two particular types of silk fabrics used for painting background were compared: a recreation of historical material and a mass produced material of present day. The sizing process made the surface characteristics of the silk fabrics more suitable for painting. The dyeing properties of the fabrics were related to the surface area of the fabrics, and had no significant effect on their mechanical properties. The antibacterial activity of the tannin-based natural dyestuffs were maintained after the sizing. The performance assessment by the KES-FB system showed that the fabrics are more prone to deteriorate after the sizing because the glue layer receives the most of the physical stresses.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.203-210
• /
• 2004

Consolidation properties were analysed by means of depositional environments. Depositional environments including geochemical properties, porewater chemistry, sediment structures, particle size distributions and carbon age dating were analysed using undisturbed samples retrieved successively from a boring hole in the study area. Laboratory oedometer tests and anisotropic consolidated triaxial tests(CKoUC) were performed to examine the overconsolidation phenomenons. Based on the carbon age dating results and profiles of geochemical properties, porewater chemistry, salinity and pH, it was founded that the upper silt/clay complex layer was deposited under marine condition while sand and clay layers were deposited under fluvial condition. Planar laminated structures of silts and clays were dominant in marine deposits. Although there was no clear evidences that geological erosion had been occurred in marine deposits, overconsolidation ratio obtained from oedometer tests were greater than unity. Stress paths of samples behaved similar to those of normally consolidated clays. Data plotted in stress state charts proposed by Burland(1990) and Chandler(2000) showed that the marine deposits were geologically normally consolidated. These apparent overconsolidations can be explained by the fabric and chemical bonding due to the difference of the rate of deposition.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.5
• /
• pp.715-723
• /
• 2013

This develops a new and advanced S/S knitwear material made of linen/bamboo blended yarn. Linen/bamboo knitted fabrics were compared with linen/polyester knitted fabrics in terms of appearance as well as physical and comfort properties. Rib knitted fabrics were remarkably thicker than plain knitted fabrics. Knitted fabrics based on polyester yarns were heavier than those based on bamboo yarn. The porosity decreased in the following order: linen 100% > bamboo 100% > polyester 100%. The drape properties of bamboo 100% and linen/bamboo knitted fabrics were excellent. The pilling resistances of linen 100% and linen/bamboo knitted fabrics were excellent. The highest and lowest air permeability was observed in the case of linen/bamboo knitted fabrics and polyester 100% knitted fabrics, respectively. The instant cool-feeling was enhanced as the bamboo yarns were blended. The thermal conductivity of linen 100% knitted fabrics was the highest and the thermal conductivity of linen/bamboo knitted fabrics was higher than linen/polyester knitted fabrics. Bamboo 100% knitted fabrics showed a higher moisture regain than polyester 100% knitted fabrics. The results confirmed the superior appearance and comfort of a novel S/S knit wear material made of linen/bamboo knitted fabric.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.11 no.2 s.24
• /
• pp.13-21
• /
• 1987

Nowadays, the amount used carpets are on the increase, according to the improvement of life-style. The pleasantness of carpet is caused by the properties of pile, because the most carpets are made pile fabric. For that reason, a study on the compressional properties of carpet is very important issue. This study has been carried out to investigate the differences of compressional properties in various acrylic carpets which were Cut, Tufted, Jacquard and Shag. Each acrylic carpets was transformed to 4, 6, 8 mm of pile height, as results of transformation, we could get the pressure-thickness curve and pressure-deformation curve. The results are summarized as follows. 1. Rate of compression increases, compressive resistance and compressive elasticity decr-eases, as pile height increases. 2. Regardless of pile height, compressive elasticity reached the limit in recovery period at about 10 minutes. 3. Work of compression increases, as pile height increases. 4. Work of compression decreases, as apparent density increases. 5, Cut-type carpet has the best cushion.

• Carbon letters
• /
• v.5 no.1
• /
• pp.1-5
• /
• 2004

The effects of fiber surface-treatment and sizing on the dynamic mechanical properties of unidirectional and 2-directional carbon fiber/nylon 6 composites by means of dynamic mechanical analysis have been investigated in the present study. The interlaminar shear strengths of 2-directional carbon/nylon 6 composites sized with various thermosetting and thermoplastic resins are also measured using a short-beam shear test method. The result suggests that different surface-treatment levels onto carbon fibers may influence the storage modulus and tan ${\delta}$ behavior of carbon/nylon 6 composites, reflecting somewhat change of the stiffness and the interfacial adhesion of the composites. Dynamic mechanical analysis and short-beam shear test results indicate that appropriate use of a sizing material upon carbon fiber composite processing may contribute to enhancing the interfacial and/or interlaminar properties of woven carbon fabric/nylon 6 composites, depending on their resin characteristics and processing temperature.

• Textile Coloration and Finishing
• /
• v.7 no.4
• /
• pp.16-24
• /
• 1995

Traditionally dyeing fabric with dyestuff extracted from Indigo was a popular method of obtaining blue color in the world before synthetic dyestuff was developed in the 1890's. As the Korean traditional process of dyeing extracted from Indigo, there are two kinds of dyeing process; The deposite dyeing of muddy Indigo and the leaf dyeing of Indigo plant. In order to study the properties of leaf dyeing of Indigo, the dyeing properties, color difference on cotton and silk fabrics under several dyeing conditions were investigated. In the dyeing of cotton and silk fabrics with leaf dyeing of Indigo, the dyeing affinity of silk was higher than that of cotton, the cotton and silk fabrics were dyed dark yellowish Green and dark Blue, respectively. the dye uptake increased with the increase of dyeing temperature and of the unmber of dyeing times. When cotton and silk fabrics dyed with leaf dyeing of Indigo at 6$0^{\circ}C$ for six number of times, the K/S value of dyed cotton and silk were calculated 1.286, 2.613 respectively.