• 한국의류학회지
• /
• 제21권6호
• /
• pp.1051-1059
• /
• 1997

The objectives of this study were to investigate the effects of mordants and dyeing: on the dyeability and color fastness of the fabrics dyed with the extract from Turmeric. The following results were drawn from the data obtained. 1. The wavelengths of the strongest absorption band of Turmeric extract were 400 nm respectively and the wavelengths were 440 nm after the mordants were added in the color extract. The bands of Turmeric extract shifted to long wave length side as pH increased. In all cases, the abosorbancies were increased as pH increased. 2. The main color substance in extract from Turmeric were expected to be curcumin respectively by spectrophotometric and HPLC studies. 3. As to the concentration of color extract for dyeing, about 20 g/L was the optimum concentration to dye silk and cotton fabrics with extract. 4. The K/S values of dyed fabrics were increased gradually as the concentration of mordants increased, and the highest K/S values were obtained at 5∼10%. When using the mordanting methods, silk fabric by premordanting and cotton fabric by premordanting and synmordanting had influenced upon K/S valse. 5. The color fastness of fabrics dyed with Turmeric extract against dry cleaning, washing, rubbing and perspiration was improved 1 level or so but light fastness was remained.

• 패션비즈니스
• /
• 제24권5호
• /
• pp.106-124
• /
• 2020

The purpose of this study was to analyze the three-dimensional (3D) characteristics and reproducibility of the effective expression of North American smocking pleats in the process of making clothes using a 3D virtual clothing system (CLO) and present a method of expression according to the types of North American smocking. In this study, lattice, lozenge, and flower smocking were produced as real smocking and 3D virtual content, and actual muslin properties were measured using a Fabric Kit and reflected using an emulator. The results of this study confirmed that a dense puckered design such as North American smocking could be expressed depending upon the internal line, fold angle, and reinforcement setting for 3D smocking. To partially apply pleats to flat fabrics, it was necessary to set fold lines. The fold line setting could be expressed by designing the internal line in horizontal, vertical, and diagonal directions according to the North American smocking design, and then setting the fold angle for each internal line. By setting fold angles of 0 degrees and 360 degrees according to the folding direction of the set internal line, the fabric was clearly folded and stable pleats were created. This study will contribute to the vitalization of the 3D virtual fashion content industry by analyzing and presenting the optimal expression method of sophisticated and complex pleats generated according to the North American smocking design pattern.

• 한국염색가공학회지
• /
• 제23권3호
• /
• pp.155-162
• /
• 2011

para-Aramid has limited dyeability because of its highly crystalline structure and compactness. To improve the dyeability of the para-aramid to reactive dyes of bright color in deep shade, the fabrics were photografted under continuous UV irradiation with dimethylaminopropyl methacrylamide and 4-benzoyl benzoic acid as a monomer and a hydrogen -abstractable photoinitiator respectively. A UV energy of 35J/$cm^2$ and a photoinitiator concentration of ten percent or more with respect to the monomer in the formulation was required for optimal photografting. Grafting yield increased with higher monomer application level. Surface analysis indicated significant alterations in the atomic composition of the photografted fabric surface and the fabric surface was covered with the grafted polymers. While the pristine para-aramid fabrics showed no appreciable dyeability to the ${\alpha}$-bromoacrylamide reactive dyes, the grafted para-aramid fabrics enhanced the dyeability to the reactive dyes substantially. In case of C.I. Reactive Blue 50, a K/S value of 8.7 can be obtained with the grafted para-aramid fabrics with a grafting yield of 2.3 %. Also the color fastness properties of the dyed fabrics was excellent in the conditions of washing, rubbing and light irradiation.

• Nuclear Engineering and Technology
• /
• 제10권4호
• /
• pp.195-201
• /
• 1978

감마선을 이용하여 폴리에스터직포에 methacylic acid와 methyl methacylate를 graft 종합반응시켜서 그 반응성을 보았다. 폴리에스터직포에 acrylic acid, methacrylic acid, methyl methacrylate를 중합반응 시켰을 때 graft 효율은 monomer 혼합용액내에 포함되어 있는 용매의 dielectric constant에 따라 상당한 차이를 나타내었다. Graft 수율은 방사선 선량과 monomer 농도 및 swelling agent의 농도에 좌우되었다. MA graft copolymer의 glass transition temperature (101$^{\circ}C$)와 melting point (238$^{\circ}C$)를 측정하였고, 정전기 효과는 frictional electricity 8,000V에서 half life가 0 sec이었으며, moisture regain는 5.6%, wicking time은 1 sec이었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
• /
• pp.554-557
• /
• 2005

The bipolar plate is a major component of the PEM fuel cell stack, which takes a large portion of stack cost. In this study, as alternative materials for bipolar plate of PEM fuel cells, graphite composites were fabricated by compression molding. Graphite particles mixed with epoxy resin were used as the main substance to provide electric conductivity. To achieve desired electric properties, specimens made with different mixing ratio, processing pressure and temperature were tested. To increase mechanical strength, one or two layer of woven carbon fabric were added to the original graphite and resin composite. Thus, the composite material is consisted of the three phases: graphite particles, epoxy resin, and carbon fabric. By increasing mixing ratio, fabricated pressure and process temperature, electric conductivity was improved. The results of tensile test showed that the tensile strength of two-phase graphite composite was about 5MPa, and that of three-phase composite was increased to 54MPa.

• 한국생활과학회지
• /
• 제9권1호
• /
• pp.33-45
• /
• 2000

The handle were observed by objective and subjective method as the washing was repeated for 4 kinds(sample A, B, C, D) of materials which have different water vapor transmission, and the change of water vapor transmission each others. The results of factor analyses for 18 polar adjective words on subjective handle test yielded 4 factors, that were 'elastic property', 'surface property', 'thickness and weight property' and 'thermal and rigid property'. The surface properties were deteriorated remarkably as washing was repeated and significant difference were observed. Compared with the primary hand value for each materials, the statistical difference of samples was shown at Koshi and Fukurami measured by the KES-FB system. Koshi decreased for all the materials after repeated washing, and Fukurami had a tendency to increase for all the materials in proportion to repeated washing. Significant difference of total hand value wasn't shown in repeated washing number, but in fabric types.

• 한국의류학회지
• /
• 제23권7호
• /
• pp.1064-1072
• /
• 1999

Nylon fabric was grafted for the purpose of the development of detergency against the hemoglobin as a protein soil. By free-radical producing chemical initiator systems the graft using acrylic acid(AA) as a hydrophilic vinyl monomer was performed to change surface energies in the presence of ammonium persulfate(APS) as an initiator and then acrylic acid grafted Nylon was treated with NaOH solution. The surface morphology for Nylon-g-NaAA with changing graft rate were studied by scanning electron microscopy (SEM) The properties of the Nylon such as diameter tenacity elongation contact angle and the hemoglobin removal were also investigated. The diameter of grafted Nylon fiber increased as the graft ratio increased. The tenacity of grafted Nylon also increased with increasing graft ratio up to 15% The elongation however decreased gradually according to graft, The contact angle decreased after graft and alkaline treatment. The amount of hemoglobin on the grafted Nylon increased in proportion to the graft ratio. Hemoglobin was easily removed from grafted Nylon while it was difficult to be removed from ungrafted Nylon. The detergency of hemoglobin for grafted Nylon decreased when the graft ratio exceeded 15% The removal of hemoglobin increased markedly with increasing hemoglobin content and revolution speed. Therefore the removal of hemoglobin was improved due to graft and alkaline treatment.

• 패션비즈니스
• /
• 제18권4호
• /
• pp.1-14
• /
• 2014

Currently smart textile market is rapidly expanding and the demand is increasing integration of an electronic fiber circuit. The garments are an attractive platform for wearable device. This is one of the integration techniques, which consists of is the selective introduction of conductive yarns into the fabric through knitting, weaving or embroidering. The aim of this work is to develop a golf bend driven prototype design for an attachable Arduino that can be used to assess elbow motion. The process begins with the development of a wearable device technique that uses conductive yarn and flex sensor for measurement of elbow bending movements. Also this paper describes and discusses resistance value of zigzag embroidery of the conductive yarns on the tensile properties of the fabrics. Furthermore, by forming a circuit using an Arduino and flex sensor the prototype was created with an assistance band for golf posture training. This study provides valuable information to those interested in the future directions of the smart fashion industry.

• 한국의류학회지
• /
• 제29권9_10호
• /
• pp.1274-1284
• /
• 2005

Effect of fixation methods and relaxation treatment on the dimensional stability and physical properties of MDPPA/HMM treated cotton knitted fabrics were studied. Combination of four different fixation methods - relaxation, swelling agent treatment, pad dry cure fixation, and wet fixation - were applied to flame retardant finish of 4 kinds of cotton knitted fabric with MDPPA/HMM. Then these fabrics were washed 10 times. As a result, In swelling treatment on 10G showed relatively higher value of length shrinkage than 14G. Length and width shrinkage were increased by initial washing treatment and no further change was shown after 6 washing cycles. After 10 washing cycles, length and width shrinkage decreased. The KES standardized basic value of B/W, 2HB/W and bursting strength of interlock were relatively larger than those of single jersey. The values of B/W and 2HB/W of cotton knitted fabrics were increased by relaxation and washing treatment but were decreased by swelling treatment. In addition, the bursting strength of the cotton knitted fabrics was decreased after fusing, washing and relaxation treatment.

• 한국염색가공학회지
• /
• 제7권1호
• /
• pp.32-42
• /
• 1995

In order to reduce the amount of waste water generated from textile dyeing process and processing water, cotton fabric was bleached with ozone in ozone/water contact system, and dyed. The results obtained from the measurement of whiteness, reflectance, tensile strength, color difference, and K/S value of treated samples were as follow : 1) In ozone bleaching, factors affect whiteness most are treatment time and ozone dosage. As treatment time is lengthened, whiteness increases. Futhermore, bleaching effect is high in acidic treatment, but low in alkaline treatment. 2) As bleaching goes on, maximum absorption wave length shifts to shoter wavelengths. 3) As treatment time is lengthened or pH of treatment is low, tensile strenth of treated fabric decrease. 4) In all cases, color difference of dyed cotton fabrics in above 2% o.w.f. dyestuff concentration don't go beyond 1∼2 AN unit, compared with standard.