• 한국염색가공학회지
• /
• 제18권5호
• /
• pp.61-71
• /
• 2006

This paper addresses the factors hindering the image quality of lines in inkjet printed on polyester fabric as printing media. Lines were printed onto different types of polyester fabrics in warp and filling directions. Line image quality including line width, edge blurriness, and edge raggedness was assessed. The effect of capillary wicking on line image quality of printed spun polyester fabric is discussed. The factors on the image quality include printing position(top of the yam or between the yarn), printing direction(warp or filling), yarn structures(filament or spun), thread size(yam or fiber), finishing, and ink properties(evaporation rate). More than 30% differences in image quality results were observed by changing the printing location on the spun polyester fabric. The best results of the image quality were obtained with the printed plain and spun polyester fabrics. The fiber sizes may affect capillary size; therefore, the image quality can be dissimilar. Types of finishing materials and inks greatly improve the line image quality on spun polyester fabrics.

• 복합신소재구조학회 논문집
• /
• 제5권1호
• /
• pp.16-21
• /
• 2014

In the study, tensile, compression and in-plane tests about longitudinal direction of glass fiber were performed. Also, to obtain the material properties of GFRP fabric composite, tensile test was performed. All test were performed by the test method of ASTM. Maximum compressive strength was smaller than the maximum tensile strength at the longitudinal direction test results. Elastic modulus of the tensile and compressive was almost similar at the compression test results in the longitudinal direction. Based on the GFRP fabric composite test results, GF91 was showed good performance at maximum compressive, maximum strain and elastic modulus.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.71-76
• /
• 2003

This paper describes the characteristic of a large-diameter pipe to obtain smooth surface using Electropolishing after grinding using a non-woven fabric. Grinding using a non-woven fabric is possible under lower load and fine effect comparing with Wheel grinding. Also, the ion from the surface of the metal is eliminated by means of an electrical potential and current in Electropolishing. Electropolishing is used for leveling the surface, improving the physical appearance of the part, promoting corrosion properties and reducing contamination and adhesion of the surface. Therefore, the aim of the present study is to investigate the internal machining of a large-diameter pipe for semiconductor using experimental design method.

• 한국의류학회지
• /
• 제9권2호
• /
• pp.27-34
• /
• 1985

Cotton, P/C and polyester fabrics were laundered and treated with 4 kinds of aftertreating agent(antistatic and softening agents) on marketing. Some treating condition:. which include agent concenteration, treating time and rinsing extent after laundering, were varied. And then the effects of agents with each treating condition-handle value, charged voltage and half-life, and crease recovery etc.-were determined and discussed about their change. The improvement of handle and antistatic properties by treatment were indicated remarkably for cotton fabric and P/C and polyester fabrics respectively. Generally, the handle value of cotton was decreased and then increased again, and the charged voltage and half-life of P/C and polyester fabrics were decreased with increase of concenteration of agents. The effect of antistatic improvement for P/C fabric was larger than polyester fabric at even lower concenteration of agents. The effects were increased with treating time and rinsing extent. In particular, those of short time(1 minute) treatment were very small.

• 한국염색가공학회지
• /
• 제10권4호
• /
• pp.7-14
• /
• 1998

Microwaves are high frequency radiation capable of generating very rapid, uniform and efficient heating of textile material. Microwave heated dyeing of polyester fabric was tried with different solvent systems, irradiation time and dye concentration. Microwave fixation methods were used with 100% water,30% urea, EG and DMF, respectively, pad-baths in which the padded fabrics were exposed over a heated or boiling water bath to maintain sufficient moisture content during irradiation. In order to ascertain the relation between the dyeing property of polyester fabric and the microwave irradiation condition caused by microwave heating, the K/S values and fastness properties of dyed fabrics such as light, washing and sublimation fastness were measured.

• Fibers and Polymers
• /
• 제4권4호
• /
• pp.169-175
• /
• 2003

A simulation system for versatile garment drape has been developed. Using this system, the shape of a garment can be simulated in consideration of fabric physical properties as well as the interaction between fabrics and other objects. Each fabric piece in a garment is modeled using a geometrically constrained particle system and its behavior is calculated from an implicit numerical integration algorithm in a relatively short time. The system consists of three modules including a preprocessor for the preparation of fabric patterns and external objects, a postprocessor for the results of three-dimensional visualization, and a drape simulation engine. It can be used for the design process of textile goods, garments, furniture, or upholsteries.

• 한국염색가공학회지
• /
• 제11권1호
• /
• pp.48-60
• /
• 1999

In this paper, a new regenerated celluosic fiber, "Tencel" was treated with cellulase enzyme. Also Tencel fabrics were pretreated with NaOH and dyed with various reactive dyes, and subsequently finished with DMDHEU. $\Delta{E}^*_{ab}$ value was calculated by measuring color difference before and after wet abrasion test to rubbing. The fibrillation propensity was estimated on Tencel by means of weight loss, $\Delta{E}^*_{ab}$ value, and SEM observation. Weight loss of NaOH pretreated Tencel fabric is more lower than that of original fabric. The cellulase treatment decreased tensile strength but improved wet abrasion strength, wrinkle recovery, and bending properties. Tendency of fibrillation for Tencel fabric was reduced by NaOH-pretreatment, dyeing with multifunctional reactive dyes, and afterfinishing by DMDHEU.by DMDHEU.

• 한국의류학회지
• /
• 제5권2호
• /
• pp.49-53
• /
• 1981

This study was carried out to investigate the drapability of polyester double jersey skirt Drapability is an important aesthetic properties of fabric on clothing construction, In this thesis weight, shearing, bending and non-isotropic characteristics of fabric were regarded as important factors of drapability, Especially for drapability of skirt, I investigated hem effect on various length of hem and skirt, The results were as follows, 1. The less the weight of fabric was, the greater drapability appeared. On fabrics, large pliability and modulus of shear have good drapability, 2. On clothing cutting, non-isotropic property affected on drapability of clothes remark-ably. Drapability order of clothes was greatest in bias direction, next in wale, course direction, 3. The shorter the skirt length and closer at hem line were the larger the hem effect influence upon the drapability of skirt was.

• 한국안전학회지
• /
• 제20권1호
• /
• pp.49-54
• /
• 2005

Recently, many kinds of advanced composite materials have been used in various industry fields. Among them, fabric CFRP composites are being used as primary structural components in many applications because of their superior properties. However, the complexity of the fabric structure makes understanding of their failure behavior very difficult. The mechanical strength and crack propagation of plain woven carbon fiber fabric laminate composites are examined by acoustic emission(AE) method. AE signals are acquired during the tensile test and fracture tests. Thus, the relationship between AE signal and mechanical behavior curves and crack extension length are shown. Also the interlaminar fracture toughness in terms of AE characteristics are discussed in viewpoint of crack propagation behavior.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.194-197
• /
• 2004

In this paper, compressive characteristics of carbon fabric skin with polymeric foam core sandwich structure were investigated by FE analyses and compressive tests of polyurethane foam were also conducted with respect to temperature changes, which were determined by curing processes of epoxy or polyester resin to obtain mechanical behaviour of polyurethane foam. FE analyses indicated variation of parameters with respect to manufacturing pressure, which have comparatively massive effect upon mechanical properties of sandwich structures, i.e. wavelength as well as crimp angle of carbon fabric