• The Journal of the Acoustical Society of Korea
• /
• v.38 no.3
• /
• pp.321-327
• /
• 2019

The purpose of this study is paper is to improve the flow performance and to reduce the aerodynamic noise of air discharge system consisting of a centrifugal fan, ducts and a housing for the clothes dryer. Using computational fluid dynamics and acoustic analogy based on FW-H (Ffowcs-Williams and Hawkings) Eq., air flow field and acoustic fields of the air discharge system are investigated. To optimize aerodynamic performance and aerodynamic noise, the response surface method is employed. The two factors central composite design using the inflow and outflow angles of fan blades is adopted. The devised optimum design shows the reduction of turbulent kinetic energy in the ducts and the housing of the system, and as a result, the improved flow rate and reduce noise is confirmed. Finally, the experment using the proto-type manufactured usign the optimum design shows the increase of flow rate by 4.2 %.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.3
• /
• pp.185-195
• /
• 2021

The flapping-wing micro air vehicle (FW-MAV) in this study utilizes the cambered wings made of quite flexible material. Similar to the flying creatures, the present cambered wing uses three different materials at its leading edge, vein, and membrane. And it is constrained in various conditions. Since passive rotation uses the flexible nature of the wing, it is important to select an appropriate material for a wing. A three-dimensional fluid-structure interaction solver is developed for a realistic modeling of the cambered wing. Then a parametric study is conducted to evaluate the aerodynamic performance in terms of the elastic modulus of leading edge and vein. Consequently, the elastic modulus plays a key role in enhancing the aerodynamic performance of FW-MAVs.

• Journal of Radiation Protection and Research
• /
• v.46 no.4
• /
• pp.178-183
• /
• 2021

Background: This study was carried out to provide environmental transfer parameter values to estimate activity concentrations of these radionuclides in agricultural crops when direct contamination occurred. Materials and Methods: Mass interception fractions (F_Bs) and weathering half-lives (T_ws) of ¹³¹I and radiocesium were calculated using openly available monitoring data obtained after the Fukushima Daiichi Nuclear Power Plant accident. F_B is the ratio between the initial radioactivity concentration of a radionuclide retained by the edible part of the plant (Bq·kg^-1 fresh weight [FW]) and the amount of deposited radionuclide in that area (Bq·m^-2). T_w values can be calculated using activity concentrations of crops decreased with time after the initial contamination. Results and Discussion: Calculated F_B and T_w values for ¹³¹I and radiocesium were mostly obtained for leafy vegetables. The analytical results showed that there was no difference of F_Bs between ¹³¹I and radiocesium by t-test; geometric mean values for leafy vegetables cultivated under outdoor conditions were 0.058 and 0.12 m²·kg^-1 FW, respectively. Geometric mean T_w value of ¹³¹I in leafy vegetables grown under outdoor conditions was 8.6 days, and that of radiocesium was 6.6 days; there was no significant difference between T_w values of these radionuclides by Wilcoxon rank sum test. Conclusion: There was no difference between ¹³¹I and radiocesium for F_Bs and T_ws. By using these factors, we would be able to carry out a rough estimation of the activity concentrations of ¹³¹I and radiocesium in the edible part of leafy crops when a nuclear accident occurred.

• Journal of Plant Biotechnology
• /
• v.49 no.4
• /
• pp.325-330
• /
• 2022

In this study, a plant tissue culture system was established for Atractylodes spp., an economically valuable medicinal crop in Korea that has low domestic production and is increasingly imported. In particular, Atractylodes ovata was treated with four types of cytokinins, 6-benzylaminopurine (BA), zeatin, kinetin, and thidiazuron (TDZ), in two different concentrations (0.5 and 1.0 mg/L). Among the four types of cytokinins, the BA treatment was effective for the shoot and root growth of A. ovata. Both the 0.5 mg/L and 1.0 mg/L concentrations of BA showed similar results; however, the 1.0 mg/L concentration of BA was more effective in promoting shoot and root growth. The treatments showed that the TDZ treatment was not effective for the shoot and root growth, except for the number of shoots and the fresh weight (FW) of the root; therefore, it was unsuitable for this species. In this study, we established a mass production system of A. ovata. Our results showed that direct in vitro regeneration may make a significant contribution to improving the cultivation of the medicinal plant A. ovata.

• Composites Research
• /
• v.21 no.6
• /
• pp.23-30
• /
• 2008

In this paper, the effect of the natural aging on the strength distribution and structural service life of a Filament Wound (FW) composite pressure vessel was studied. The fiber failure strain, which is varied significantly, was considered as the design random variable and the strength analysis was carried out by probabilistic numerical approach. The progressive failure analysis technique and the First Order Reliability Method (FORM) were embedded in this numerical model. As the calculation results, the probability of failure was obtained for each aging time steps and it is found that the strength degradation in FW composite pressure vessel, due to the natural aging, appears within 10 year-aging-time. As an example of the life prediction under natural aging using arbitrary laminated model, the service lifetime of 13 years was predicted based on the probability of failure of 2.5% and the design pressure of 3,250 psi.

• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.1974-1987
• /
• 2023

The load-following operation of small modular reactors (SMRs) requires accurate prediction of transient behaviors that can occur in the balance of plants (BOP) and the nuclear steam supply system (NSSS). However, 1-D thermal-hydraulics analysis codes developed for safety and performance analysis have conventionally excluded the BOP from the simulation by assuming ideal boundary conditions for the main steam and feed water (MS/FW) systems, i.e., an open loop. In this study, we introduced a lumped model of BOP fluid system and coupled it with NSSS without any ideal boundary conditions, i.e., in a closed loop. Various methods for coupling boundary conditions at MS/FW were tested to validate their combination in terms of minimizing numerical instability, which mainly arises from the coupled boundaries. The method exhibiting the best performance was selected and applied to a transient simulation of an integrated NSSS and BOP system of a SMART. For a transient event with core power change of 100-20-100%, the simulation exhibited numerical stability throughout the system without any significant perturbation of thermal-hydraulic parameters. Thus, the introduced boundary-condition coupling method and BOP fluid system model can expectedly be employed for the transient simulation and performance analysis of SMRs requiring daily load-following operations.

• Journal of Aerospace System Engineering
• /
• v.17 no.2
• /
• pp.26-37
• /
• 2023

Urban air mobility (UAM) is being developed as part of the next-generation aircraft, which could be a viable solution to entrenched problems of urban traffic congestion and environmental pollution. A new airport platform called vertiport as a space where UAM can take off and land vertically is also being introduced. Noise regulations for UAM will be strict due to its operation in a highly populated urban area. Ground effects caused by vertiport can directly affect aerodynamic forces and noise characteristics of UAM. In this study, ground effects of vertiport on aerodynamic loads, vorticity field, and far-field noise were analyzed using Lattice-Boltzmann Method (LBM) simulation and Ffowcs Williams and Hawkings (FW-H) acoustic analogy with a permeable surface method.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2022.09a
• /
• pp.99-99
• /
• 2022

Artemisia fukudo is a biennial plant and has been reported to have anticancer, anti-melanogenesis, and anti-inflammatory effects. However, it is difficult to produce biomass from A. fukudo, so it is not used as a material for cosmetics or pharmaceuticals. In vitro culture can stably produce biomass throughout the year. In this study, the culture system for producing the highest biomass and bioactive substances was compared. Ex vitro plants were collected in Pyoseon-eup, Jeju island in May 2021, and in vitro culture was harvested after culturing for 8 weeks (plantlet) and 4 weeks (adventitious roots), respectively. After harvest, total polyphenol content (TPC), total flavonoid content (TFC), and DPPH scavenging activity were analyzed. In biomass production, adventitious roots (FW: 5.1 g·100 ml^-1, DW: 0.6 g·100 ml^-1) were about 4 times higher than that of plantlets (FW: 1.8 g·200 ml^-1, DW: 0.3 g·200 ml^-1). Both TPC and TFC were highest in ex vitro plants (9.2 ㎍·mL^-1, 31.6 ㎍·mL^-1), and were 3.0 times and 1.8 times higher than those of plantlets (3.0 ㎍·mL^-1, 17.8 ㎍·mL^-1), respectively. The IC₅₀ value of DPPH scavenging activity was also the best in ex vitro plants (69.8 ㎍·mL^-1), followed by root root (184.4 ㎍·mL^-1) and plants (325.3 ㎍·mL^-1) in that order. Through additional elicitor treatment, scale-up, and advanced compounds analysis such as HPLC, it can be used as an industrial material.

• Korean Journal of Agricultural Science
• /
• v.50 no.4
• /
• pp.967-976
• /
• 2023

Biochar is emerging as a promising substance for achieving carbon neutrality and climate change mitigation. It can absorb several nutrients via ion bonding on its surface functional groups, resulting in slow dissociation of the bonds. Biochar, like organic fertilizers, contributes to sustainable nutrient management. The purpose of this study was to investigate the effects of nutrient-coated biochar amendments on leafy vegetables production and soil fertility. The nutrient-coated biochar was produced by soaking rice husk biochar in a nutrient solution containing nitrogen (N), phosphorus, and potassium for 24 hours. Nutrient-coated biochar and organic fertilizers were applied to soil at a rate of 120 kg·N·ha^-1. The growth components of the leafy vegetables showed that nutrient-coated biochar led to the highest fresh weight (FW) of both lettuce and kale (i.e., 146.67 and 93.54 g·plant^-1 FW, respectively). As a result, nutrient-coated biochar amendments led to superior yield compared to the control treatment and organic fertilization. The elemental composition of leafy vegetables revealed that soil amended with nutrient-coated biochar resulted in higher nutrient contents, which was attributed to the high nutrient contents supplied by the rice husk biochar. Soil amendment with nutrient-coated biochar positively enhanced the soil fertility compared to amendment with organic fertilizer. Therefore, nutrient-coated biochar is a promising substance for enhancing agronomic performance of leafy vegetables and improving soil fertility.

• Journal of Cardiovascular Imaging
• /
• v.30 no.4
• /
• pp.279-289
• /
• 2022

BACKGROUND: In many cardiovascular disorders, the contractile performance of the right ventricle (RV) is the primary determinant of prognosis. For evaluating RV volumes and function, 4 dimensional (4D)-echocardiography has become common. This research used 2D and 4D modalities to assess RV contractile performance in hypertensive patients. METHODS: A total of 150 patients with essential hypertension were enrolled in this study, along with 75 age and sex-matched volunteers. Clinical evaluation and echocardiographic examination (including M-mode, tissue Doppler imaging, and 2D speckle tracking) were conducted on all participants. RV volumes, 4D-ejection fraction (EF), 4D-fractional area change (FAC), 4D-tricuspid annular plane systolic excursion (TAPSE), 4D-septal and free wall (FW) strain were all measured using 4D-echocardiography. RESULTS: Hypertensive patients showed 2D-RV systolic and diastolic dysfunction (including TAPSE, 2D-right ventricular global longitudinal strain, RV-myocardial performance index and average E/EaRV) and 4D-RV impairment (including right ventricular EF, FAC, RV strain and TAPSE, right ventricular end-diastolic volume and right ventricular end-systolic volume) compared to the control group. We verified the prevalence of RV systolic dysfunction in hypertension patients using the following parameters: 1) 15% of them had 2D-TAPSE < 17 mm vs. 40% by 4D-TAPSE; 2) 25% of them had 2D-GLS < 19% vs. 42% by 4D-septal strain and 35% by 4D FW strain; 3) 35% of hypertensive patients had 4D-EF < 45%; and finally; 4) 25% of hypertensive patients had 2D-FAC < 35% compared to 45% by 4D-FAC. CONCLUSIONS: The incidence of RV involvement was greater in 4D than in 2D-modality trans-thoracic echocardiography. We speculated that 4D-echocardiography with 4D-strain imaging would be more beneficial for examining RV morphology and function in hypertensive patients than 2D-echocardiography, since 4D-echocardiography could estimate RV volumes and function without making geometric assumptions.