• Journal of the Korean Applied Science and Technology
• /
• v.27 no.2
• /
• pp.188-195
• /
• 2010

In this study, we experimented that how to synthesis waterborne urethane-acrylic hybrid resin for leather coatings. First of all, We had analyzed data by FT-IR, SEM and TGA for the machanical properties. By TGA analysis polymers showed heat distortion temperature. and by FT-IR measurement we confirmed that synthesis of urethane and acrylic. In the experiment, solvent resistance, polyurethane and acrylic grades 4-5 showed both a high. Tensile strength measured in the waterborne polyurethane > Acrylic emulsion showed strength in the order. Films were obtained by coating the water born resin on leveled surfaces and allowing them to dry at room temperature for 72hrs. After demolding, the films were kept in a desiccator to avoid moisture contant at $25^{\circ}C$ for 45hrs before the measurements. In this result, the mechanical propersies of waterborne polyurethane-acrylic hybrid resin showed that how effect to resin in leather coating between polyurethane content and acrylic content. Therefore, acrylic emulsion had most high solvent resistance glade and waterborne polyurethane had good result in abrasion test and tensile strength.

• Korean Journal of Materials Research
• /
• v.33 no.10
• /
• pp.385-392
• /
• 2023

A solution combustion process for the synthesis of hollandite (BaAl₂Ti₆O₁₆) powders is described. SYNROC (synthetic rock) consists of four main titanate phases: perovskite, zirconolite, hollandite and rutile. Hollandite is one of the crystalline host matrices used for the disposal of high-level radioactive wastes because it immobilizes Sr and Lns elements by forming solid solutions. The solution combustion synthesis, which is a self-sustaining oxi-reduction reaction between a nitrate and organic fuel, generates an exothermic reaction and that heat converts the precursors into their corresponding oxide products in air. The process has high energy efficiency, fast heating rates, short reaction times, and high compositional homogeneity. To confirm the combustion synthesis reaction, FT-IR analysis was conducted using glycine with a carboxyl group and an amine as fuel to observe its bonding with metal element in the nitrate. TG-DTA, X-ray diffraction analysis, SEM and EDS were performed to confirm the formed phases and morphology. Powders with an uncontrolled shape were obtained through a general oxide-route process, confirming hollandite powders with micro-sized soft agglomerates consisting of nano-sized primary particles can be prepared using these methods.

• Advances in nano research
• /
• v.5 no.3
• /
• pp.253-260
• /
• 2017

We report a simple eco-friendly process for the synthesis of gold nanoparticles (AuNPs) using aqueous extract from Coffea Arabica fruit. The formation of AuNPs was confirmed using absorption spectroscopy and scanning electron microscopy images. FT-IR analysis demonstrates the major functional groups present in Coffee Arabica fruit extract before and after synthesizing AuNPs. The Face Center Cubic (FCC) polycrystalline nature of these particles was identified by X-Ray diffraction (XRD) analysis. Taking into account the contribution of the biomass surrounding the AuNPs, dynamic light scattering (DLS) results revealed an average particle size of ~59 nm.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05a
• /
• pp.431-435
• /
• 2012

Aluminum containing mesoporous molecular sieves Al-SBA-1 ($n_{Si}/n_{Al}$= 2, 5, 10, 15) was synthesized with a one-step method, and the catalyst was characterized with powder X-ray diffraction (XRD), nitrogen adsorption-desorption, thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR). Finally, we studied the catalytic activities of Al-SBA-1 molecular sieves in Pechmann reaction of 3-methoxyphenol and Ethyl acetoacetate to get 7-methoxy-4-methyl coumarin. Four parameters reaction temperature, time, catalyst weight and reactants ratio were optimized.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.292-292
• /
• 2010

Among the semiconducting materials, ZnO has considerably attracted attention over the past few years due to the high activities in removing organic contaminants created from industry. In this work, ZnO nanoparticles were synthesized by spray pyrolysis method using the zinc acetate dihydrate as starting material at various synthesis temperatures. The structures of the synthesized ZnO were characterized by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Brunauer, Emmett & Teller (BET), Fourier Transformation Infrared (FT-IR), and UV-vis spectroscopy. The Miller indices of XRD patterns indicate that the synthesized ZnO nanoparticles showed a hexagonal wurtzite structure. With increasing synthesis temperature, the mean diameter of ZnO nanoparticles increased, and their crystallinity was improved. Also, the photocatalytic activity of ZnO was studied by the photocatalytic degradation of methyleneblue (MB) under UV irradiation (365 nm) at room temperature. The results show that the photocatalytic efficiency of ZnO nanoparticles was enhanced by increasing synthesis temperature.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.114.1-114.1
• /
• 2010

Fe계 촉매는 FT(Fischer-Tropsch) 합성반응에 매우 유망한 촉매로 주목받고 있으며, $280^{\circ}C$ 미만의 저온 FT 합성반응의 경우, 침전법이 Fe계 촉매의 가장 전형적인 제조방법으로 알려져 있다. Fe계 촉매에 첨가되는 조촉매로는 Cu, K, $SiO_2$ 등이 가장 대표적이며, 이 중에서 특히 구조 조촉매로 첨가되는 $SiO_2$는 Fe계 촉매의 기계적 강도를 향상시킬 뿐만 아니라, 촉매의 성능에도 크게 영향을 미치는 것으로 보고되고 있다. 본 연구에서는 침전법을 이용하여 저온 FT 합성반응용 Fe계 촉매를 제조하였고, 구조 조촉매로 첨가한 $SiO_2$의 원료물질에 따른 Fe계 촉매의 성능변화를 조사하였다. $SiO_2$의 원료물질로는 콜로이드 $SiO_2$와 분말 $SiO_2$를 이용하였으며, 분말 $SiO_2$를 이용한 촉매가 콜로이드 $SiO_2$를 이용한 촉매보다 다소 높은 CO 전환율 및 중질탄화수소 선택도를 나타내는 것을 확인하였다.

• Textile Coloration and Finishing
• /
• v.5 no.3
• /
• pp.221-228
• /
• 1993

Cellulose acetate and methyl cellulose were synthesized from waste cellulose in order to make waste knit on value added highly. Crystal waste cellulose by oxidation using $HIO_4$ and then acetylation was decrystallized. A degee of crystallinity was measured by X-ray diffraction and the structure was identified by FT-IR spetroscopy, respectively. Cellulose acetate was prepared from the reaction of decrystallized cellulose with acetic acid, cone-$H_{2}SO_{4}$ and acetic anhydride. Also, structure identification by FT-IR and a degree of crystallinity by X-ray diffraction were performed. DS of the synthesized cellulose acetate was 2.8 and viscosity average molecular weight was 238,000. Also, methyl cellulose was synthesized by treating cellulose acetate with NaOH and iodomethane. DS of the synthesized methyl cellulose was 3.0. Glucose unit with three hydroxy groups was all substituted by methoxyl groups. It was identified by FT-IR spectroscopy. Also, the thermal properties of the synthesized methyl cellulose were examined by DSC. It shewed two shewed melting peaks at 22$0^{\circ}C$ and 24$0^{\circ}C$ in the 2nd scan. It proved that DS=3.0 of methyl cellulose was a thermotropic liquid crystal.

• Macromolecular Research
• /
• v.16 no.2
• /
• pp.113-119
• /
• 2008

A series of amphiphilic dendrons n-18 (n: generation number, 18: octadecyl chain) based on an aliphatic polyether denderitic core and octadecyl peripheries were synthesized using a convergent dendron synthesis consisting of a Williamson etherification and hydroboration/oxidation reactions. This study investigated their thermal and self-assembling behavior in the solid state using differential scanning calorimetry (DSC), Fourier transform infrared (FT-IR) absorption spectroscopy, and small angle X-ray scattering (SAXS). DSC indicated that the melting transition and the corresponding heat of the fusion of the octadecyl chain decreased with each generation. FT-IR showed that the hydroxyl focal groups were hydrogen-bonded with one another in the solid state. DSC and FT-IR indicated microphase-separation between the hydrophilic dendritic cores and hydrophobic octadecyl peripheries. SAXS data analysis in the solid state suggested that the lower-generation dendrons 1-18 and 2-18 self-assemble into lamellar structures based upon a bilayered packing of octadecyl peripheries. In contrast, the analyzed data of higher-generation dendron 3-18 is consistent with 2-D oblique columnar structures, which presumably consist of elliptical cross sections. The data obtained could be rationalized by microphase-separation between the hydrophilic dendritic core and hydrophobic octadecyl peripheries, and the degree of interfacial curvature associated with dendron generation.

• Applied Chemistry for Engineering
• /
• v.26 no.1
• /
• pp.74-79
• /
• 2015

In this study, to obtain isoindoline compounds with the high thermal resistance and reddish yellow color using an environmental friendly method without the use of any surfactants, isoindoline derivatives with different structures were added at various reaction temperatures for the synthesis and the product was then crystallized by controlling temperatures and times in autoclave. Chemical structures, particle sizes, color differences, and optical properties were evaluated by the means of FT-IR, FE-SEM, UV-Vis spectroscopy, PSA (particle size analyzer) and Zeta potential analyzer. The samples with an enhanced dispersibility, highly thermal resistance, uniform particle sizes were achieved possibly due to the addition of isoindoline derivatives into the crystallization processing mixtures. The color change trend was also observed depending upon synthesis conditions.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.658-663
• /
• 2010

With petroleum reserves dwindling, interest has been increasing worldwide in Fischer-Tropsch synthesis (FT) as a method of producing synthetic liquid fuels and chemicals from coal, natural gas or biomass. In general, FT synthesis is operated through the gas phase fixed-bed reaction system. Recently, there are lots of study in supercritical fluid due to unique characteristics such as the quick diffusion of reactant gas, effective removal of reaction heat, and the in-situ extraction of high molecular weight hydrocarbon, such as wax. In this study, our major aim is to obtain a deeper insight into the effect of the type of support on the reaction performance over a supported cobalt catalyst in a fixed bed reactor.