• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.114.2-114.2
• /
• 2010

Fisher-Tropsch 반응을 통하여 생성되는 왁스는 황 또는 질소 성분을 포함하지 않으며 또한 방향족 및 중금속 성분이 없기 때문에 청정 수송유로써 사용이 가능하다는 장점이 있다. 그러나 Fisher-Tropsch 왁스는 그 분자량이 매우 큰 사슬형 탄화수소이기 때문에 수소첨가 분해반응을 통하여 중질유 range의 탄소수를 갖는 탄화수소로의 전환 기술이 반드시 필요하다. 이러한 수소첨가 분해반응에 사용되는 촉매는 강한 산점을 지니고 있는 양이온 교환 지르코니아가 대표적이라 할 수 있는데 최근 들어 강한 산점과 높은 산밀도, 그리고 기공의 모양과 크기에 따라 특정 반응이 제어되거나 활성화되는 형상선택성을 가지고 있기 때문에 다양한 반응에 촉매로 사용되는 제올라이트에 Pt 등의 귀금속을 담지한 촉매를 사용하여 Fisher-Tropsch 왁스의 전환율 및 중질유분의 선택도를 높이는 기술에 대한 연구가 활발히 진행되고 있다. 따라서 본 연구에서는 다양한 제올라이트 촉매에 귀금속을 담지하여 촉매를 제조하고 1L 급 고압 배치형 반응기를 이용하여 Fisher-Tropsch 왁스의 수소첨가 분해반응에 의한 중질유 제조 실험을 수행하고 그 결과를 고찰하였다.

• Journal of Food Hygiene and Safety
• /
• v.32 no.4
• /
• pp.284-289
• /
• 2017

Oxidized polyethylene wax (OPEW) is, one of the food additives, used as a coating agent in citrus fruits and nuts. OPEW is authorized to quantum satis in EU, USA, and is acceptable less than 250 mg/kg in Australia and New Zealand. But OPEW is unauthorized as a food additive in Korea. This study was to establish the analytical method of OPEW and demonstrate the effective application of various food samples. We first conducted to compare the various analytical method including acid value (AV), high temperature gel permeation chromatography (HT-GPC), matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF/MS), gas chromatography flame ionization detector (GC-FID) and fourier transform infrared spectroscopy (FT-IR). This result indicated that FT-IR spectrum of OPEW treated food sample displayed absorption bands for carbonyl group (C=O, $1714cm^{-1}$), ester group (C-O, $1463cm^{-1}$), aliphatic group (C-H, $2916cm^{-1}$). Furthermore, IR spectrum of OPEW treated food sample showed similar tendency with IR spectrum of OPEW standard. Therefore, it is confirmed that analytical method using FT-IR can be detected on analysis of OPEW in food. As a result of monitoring of 111 samples using established analytical method, OPEW was not detected in the food samples.

• Applied Chemistry for Engineering
• /
• v.28 no.6
• /
• pp.670-678
• /
• 2017

Self-emulsifiable polyethylene (PE) wax was prepared using acrylic acid grafted PE wax with potassium hydroxide and various emulsifiers for the economic production of PE wax emulsion. Modification reaction completion was confirmed that the peak from carbonyl group of acrylic acid disappeared and the new peak from carboxylic acid salts appeared in the FT-IR (Fourier transform infrared) spectrum data. Self-emulsifiable properties of the modified PE wax were investigated by the emulsion size and the stability of wax emulsion without any additional emulsifiers. According to self-emulsifiable properties, the emulsion size and stability were varied on the concentration and structure of the emulsifier. The greater emulsion concentration and hydrophilic poly(ethylene oxide) (PEO) characteristics of the emulsifier resulted in the smaller emulsion size and better emulsion stability. In addition, the use of emulsifiers mixture was more effective to obtain smaller size and uniform distribution of emulsion than that of single emulsifier in PE wax modification reaction. Especially, modified PE wax with OAE-5 and LAE-15 emulsifiers mixture shows excellent performance in terms of the smallest emulsion size ($4.34{\mu}m$) and emulsion stability.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.1
• /
• pp.41-45
• /
• 2003

Infrared spectroscopy is a powerful tool for gem identification and research. Therefore, this study was focused to a method of the identification of amethyst, citrine, rock quartz and jadeite by the FT-IR. The FT-IR measurement was very effective in judgement of amethyst, citrine and rock quartz whether they are natural and synthetic. And FT-IR was very useful for the distinguishment of the natural jadeite (A-Jade) from wax/polymer-impregnated jadeite (B-Jade). Such technique will be helpful to identify new challenges present by treatments and synthetics.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.658-663
• /
• 2010

With petroleum reserves dwindling, interest has been increasing worldwide in Fischer-Tropsch synthesis (FT) as a method of producing synthetic liquid fuels and chemicals from coal, natural gas or biomass. In general, FT synthesis is operated through the gas phase fixed-bed reaction system. Recently, there are lots of study in supercritical fluid due to unique characteristics such as the quick diffusion of reactant gas, effective removal of reaction heat, and the in-situ extraction of high molecular weight hydrocarbon, such as wax. In this study, our major aim is to obtain a deeper insight into the effect of the type of support on the reaction performance over a supported cobalt catalyst in a fixed bed reactor.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.3
• /
• pp.15-21
• /
• 2011

With petroleum reserves dwindling, interest has been increasing worldwide in Fischer-Tropsch synthesis (FT) as a method of producing synthetic liquid fuels and chemicals from coal, natural gas or biomass. In general, FT synthesis is operated through the gas phase fixed-bed reaction system. Recently, there are lots of study in supercritical fluid due to unique characteristics such as the quick diffusion of reactant gas, effective removal of reaction heat, and the in-situ extraction of high molecular weight hydrocarbon, such as wax. In this study, our major aim is to obtain a deeper insight into the effect of the type of support on the reaction performance over a supported cobalt catalyst in a fixed bed reactor.

• Elastomers and Composites
• /
• v.47 no.1
• /
• pp.36-42
• /
• 2012

More than 3 wt% of polycyclic aromatics (PCAs) in process oil is known to cause skin cancer. The criterion of distinguishing between low PCA oil and high PCA oil is based on 3 wt% of PCA. High PCA oil is called as a carcinogen like distillate aromatic extract (DAE). Low PCA oil is considered as safety oils like treated distillate aromatic extract (TDAE), mild extract solvate (MES), and paraffinic oil. Four types of process oils such as DAE, TDAE, MES, and paraffinic oil purified by solvent extraction and separation skills from SBR vulcanizates were measured by FT-IR techniques. The effects of rubber chemicals such as N-1,3-dimethylbutyl-N'-phenyl-p-phenylnenediamine (HPPD), polymerized 2,2,4-trimethyl-1,2-dihydroquinoline (TMDQ), paraffin wax as antidegradants, and processing aid like Structol 40MS on paraffinic oil from SBR vulcanizates were also studied. The type of low or high PCA was identified by the relative abundance of absorbance at the aromatic substitution patterns of 864, 810, and $754cm^{-1}$ and at the paraffinic or naphthenic pattern of $721cm^{-1}$.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.597-605
• /
• 2019

In order to improve the adhesion of water-based adhesive, gemini type nonionic reactive surfactants were synthesized and applied to water-based adhesives. The surfactants were synthesized by using maleic acid and polyoxyethylene cetyl ether having different length of ethylene oxide and confirmed by FT-IR and $^1H-NMR$. Their appearance was light yellow wax. The cloud point of the compound was more than $78^{\circ}C$. The measured critical micelle concentration (c.m.c) was $1.0{\times}10^{-4}{\sim}7.0{\times}10^{-4}mol/L$ and surface tension at c.m.c was 25.9~32.0 mN/m. As the number of ethylene oxide increased, the emulsifying power was improved. The foaming height of each compound by Ross-Miles method was 1.4~4.5 cm. The synthesized surfactants was then used as an emulsifier in emulsion polymerization of water-based adhesives and its physical properties were evaluated. The solid contents of prepared adhesives was 59%. The average particle size and initial tackiness of the prepared adhesives were 164~297 nm and ball no. of 20~32, respectively. The peel strength was $1.8{\sim}2.1kg_f/mm$. The retention rate of adhesives viscosity was evaluated to 99% during 30 days. Therefore, synthesized gemini type nonionic reactive surfactants are expected to be applied as an emulsifier for the high adhesive force.