• 한국전산유체공학회지
• /
• 제12권1호
• /
• pp.35-42
• /
• 2007

This paper describes a recent development on the divergence free basis function based on a hermite stream function and verifies its validity by comparing results with those from a modified residual method known as one of stabilized finite element methods. It can be shown that a proper choice of degrees of freedom at a node with a proper arrangement of the hermite interpolation functions can yield solenoidal or divergent free interpolation functions for the velocities. The well-known cavity problem has been chosen for validity of the present algorithm. The comparisons from numerical results between the present and the modified residual showed the present method yields better results in both the velocity and the pressure within modest Reynolds numbers(Re = 1,000).

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제11권4호
• /
• pp.223-228
• /
• 2011

In this paper, a novel range-free localization algorithm for anisotropic networks is proposed. In the proposed method, the characteristics of the given network are considered and each sensor node estimates the relation between the hop counts and the geographical distances. Unlike most of the previous localization algorithms, the proposed method performs well not only in the isotropic network but also in the anisotropic networks. The proposed method is applied to both isotropic and anisotropic network topologies and the simulation results demonstrate that the method exhibits excellent and robust performances.

• Structural Engineering and Mechanics
• /
• 제63권1호
• /
• pp.103-113
• /
• 2017

Free vibration analysis of plates is necessary for the field of structural engineering because of its wide applications in practical life. Free vibration of plates is largely dependent on its thickness, aspect ratios, and boundary conditions. Here we investigate the natural frequencies of simply supported tapered isotropic rectangular plates with internal cutouts using a nine node isoparametric element. The effect of rotary inertia on Eigenfrequencies was demonstrated by calculating with- and without rotary inertia. We found that rotary inertia has a significant effect on thick plates, while rotary inertia term can be ignored in thin plates. Based on comparison with literature data, we propose that the present formulation is capable of yielding highly accurate results. Internal cutouts at various positions in tapered rectangular simply supported plates were also studied. Novel data are also reported for skew taper plates.

• 한국멀티미디어학회논문지
• /
• 제15권10호
• /
• pp.1228-1235
• /
• 2012

본 논문에서는 웨어러블 컴퓨터 시스템을 위한 WUSB over WBAN 프로토콜에서 요구되는 저전력 소모 위치인식기술로서, 거리 정보를 필요로 하지 않는 위치인식알고리즘을 제안한다. 본 논문에서 제안하는 위치 인식알고리즘은 웨어러블 컴퓨터의 주변 장치를 구성하는 WUSB over WBAN 프로토콜 기반 센서노드에서 독립적으로 실행되어, range-free 한 방법을 사용하여, 각 센서노드의 위치를 신속하게 추정함으로써 전력소모를 최소화한다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 총회 및 춘계학술발표회
• /
• pp.77-80
• /
• 2001

The element-free Galerkin (EFG) method is one of meshless methods, which is an efficient method of modeling problems of fluid or solid mechanics with complex boundary shapes and large changes in boundary conditions. This paper discusses the theory of the EFG method and its applications to modeling of groundwater flow. In the EFG method, shape functions are constructed based on the moving least square (MLS) approximation, which requires only set of nodes. The EFG method can eliminate time-consuming mesh generation procedure with irregular shaped boundaries because it does not require any elements. The coupled EFG-FEM technique was introduced to treat Dirichlet boundary conditions. A computer code EFGG was developed and tested for the problems of steady-state and transient groundwater flow in homogeneous or heterogeneous aquifers. The accuracy of solutions by the EFG method was similar to that by the FEM. The EFG method has the advantages in convenient node generation and flexible boundary condition implementation.

• Journal of Mechanical Science and Technology
• /
• 제16권5호
• /
• pp.720-731
• /
• 2002

Flow with moving free surfaces is analyzed with an the Eulerian coordinate system. This study proposes a semi-implicit filling algorithm using VOF in which the PLIC (Piecewise Linear Interface Calculation) -type interface reconstruction method and the donor-acceptor-type front advancing scheme are adopted. Also, a new scheme using extrapolation of the stream function is proposed to find the velocity of the node that newly enters the computational domain. The effect of wall boundary conditions on the flow field and temperature field is examined by numerically solving a two-dimensional casting process.

• Steel and Composite Structures
• /
• 제20권5호
• /
• pp.1087-1102
• /
• 2016

The paper proposes to characterize the free vibration behaviour of non-uniform cylindrical shells using spline approximation under first order shear deformation theory. The system of coupled differential equations in terms of displacement and rotational functions are obtained. These functions are approximated by cubic splines. A generalized eigenvalue problem is obtained and solved numerically for an eigenfrequency parameter and an associated eigenvector which are spline coefficients. Four and two layered cylindrical shells consisting of two different lamination materials and plies comprising of same as well as different materials under two different boundary conditions are analyzed. The effect of length parameter, circumferential node number, material properties, ply orientation, number of lay ups, and coefficients of thickness variations on the frequency parameter is investigated.

• 전자공학회논문지B
• /
• 제32B권7호
• /
• pp.952-965
• /
• 1995

In the hypercube multiprocessor system. repeated allocations and deallocations of subcubes generate a fragmented hypercube from which. even if sufficient free processors are available, a subcube that is large enough to accomodate a new task cannot be formed. To eliminate the fragmentation, we need a processor relocation to move a task-occupied subcube to a free subcube, and gather dispersed small subcubes. In this paper, we propose a routing algorithm for task migration in circuit- switched hypercube to relocate processors. In the circuit-switched hypercube, we have to find a set of dedicated link-disjoint routing paths for each node to move a task from a busy subcube to a free subcube in fragmentation. The proposed algorithm is based on the PGC(packed Gray code) which detects all kinds of subcubes.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.269-278
• /
• 2003

In this study, the method of the finite element modeling for free vibration control of beam-type smart structures with bonded plate-type piezoelectric sensors and actuators is proposed. Constitutive equations for the direct piezoelectric effect and converse piezoelectric effect of piezoelectric materials are considered. By using the variational principle, the equations of motion for the smart beam finite element are derived, The proposed 2-node beam finite element is an isoparametric element based on Timoshenko beam theory. Therefore, by analyzing beam-type smart structures with smart beam finite elements, it is possible to simulate the control of the structural behavior by applying voltages to piezoelectric actuators and monitoring of the structural behavior by sensing voltages of piezoelectric sensors. By using the smart beam finite element and constant-gain feed back control scheme, the formulation of the free vibration control for the beam structures with bonded plate-type piezoelectric sensors and actuators is proposed.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 봄 학술발표회 논문집
• /
• pp.84-91
• /
• 2001

In this study, the adaptive analysis procedure of crack propagation based on the element-free Galerkin(EFG) method is presented. The adaptivity analysis in quasi-static crack propagation is achieved by adding and/or removing the node along the background integration cell that are refined or recovered according to the estimated error. These errors are obtained basically by calculating the difference between the values of the projected stresses and original EFG stresses. To evaluate the performance of proposed adaptive procedure, the crack propagation behavior is investigated for several examples. The results of these examples show the efficiency and accuracy of proposed scheme in crack propagation analysis.