• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.8
• /
• pp.453-464
• /
• 2004

In order to solve the well-known drawback of reduced flexibility that is associate with ASIC implementations, this paper proposes a novel arithmetic unit over GF(2$^{m}$ ) for field programmable gate arrays (FPGAs) implementations of elliptic curve cryptographic processor. The proposed arithmetic unit is based on the binary extended GCD algorithm and the MSB-first multiplication scheme, and designed as systolic architecture to remove global signals broadcasting. The proposed architecture can perform both division and multiplication in GF(2$^{m}$ ). In other word, when input data come in continuously, it produces division results at a rate of one per m clock cycles after an initial delay of 5m-2 in division mode and multiplication results at a rate of one per m clock cycles after an initial delay of 3m in multiplication mode respectively. Analysis shows that while previously proposed dividers have area complexity of Ο(m$^2$) or Ο(mㆍ(log$_2$$^{m}$ )), the Proposed architecture has area complexity of Ο(m), In addition, the proposed architecture has significantly less computational delay time compared with the divider which has area complexity of Ο(mㆍ(log$_2$$^{m}$ )). FPGA implementation results of the proposed arithmetic unit, in which Altera's EP2A70F1508C-7 was used as the target device, show that it ran at maximum 121MHz and utilized 52% of the chip area in GF(2$^{571}$ ). Therefore, when elliptic curve cryptographic processor is implemented on FPGAs, the proposed arithmetic unit is well suited for both division and multiplication circuit.

• Nuclear Engineering and Technology
• /
• v.54 no.7
• /
• pp.2444-2452
• /
• 2022

The field-programmable gate array (FPGA) is gaining popularity in industrial automation such as nuclear power plant instrumentation and control (I&C) systems due to the benefits of having non-existence of operating system, minimum software errors, and minimum common reason failures. Separate functions can be processed individually and in parallel on the same integrated circuit using FPGAs in comparison to the conventional microprocessor-based systems used in any plant operations. The use of FPGAs offers the potential to minimize complexity and the accompanying difficulty of securing regulatory approval, as well as provide superior protection against obsolescence. Wireless sensor networks (WSNs) are a new technology for acquiring and processing plant data wirelessly in which sensor nodes are configured for real-time signal processing, data acquisition, and monitoring. ZigBee (IEEE 802.15.4) is an open worldwide standard for minimum power, low-cost machine-to-machine (M2M), and internet of things (IoT) enabled wireless network communication. It is always a challenge to follow the specific topology when different Zigbee nodes are placed in a large network such as a plant. The research article focuses on the hardware chip design of different topological structures supported by ZigBee that can be used for monitoring and controlling the different operations of the plant and evaluates the performance in Vitex-5 FPGA hardware. The research work presents a strategy for configuring FPGA with ZigBee sensor nodes when communicating in a large area such as an industrial plant for real-time monitoring.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1259-1265
• /
• 2006

In this paper, we propose a combined synthetic algorithm of the logic level for high speed FPGA design. The algorithm divides critical path to reduce delay time and generates a circuit which the divided circuits execute simultaneously. This kernel selection algorithm is made by C-langage of SUN UNIX. We compare this with the existing FlowMap algorithm. This proposed algorithm shows result on 33.3% reduction of delay time by comparison with the existing algorithm.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.12
• /
• pp.1036-1040
• /
• 2002

To process data of digital linescan camera, the frame grabber is essential to handle the data in low-level and in high speed more than 30 MHz stably. Traditional approaches to the development of hardware in vision system for the special purpose are mai y based on PC system, and are expensive and gigantic. Therefore, there are many difficulties in applying those in the field. So we investigate, in this paper, the implementation of FPGA for real-time processing of digital linescan camera. The system is not based on PC, but electronic device such as micropncessor. So it is expected that the use of FPGAs for low-level processing represents a fast, stable and inexpensive system. The experiments are carried out on the web guiding system in order to show the efficiency of the new image processor.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.129-131
• /
• 2004

Elliptic Curve Cryptography (ECC) coprocessors support massive scalar multiplications of a point. We research the design for multi-segment multipliers in fixed-size ECC coprocessors using the multi-segment Karatsuba algorithm on GF($2^m$). ECC coprocessors of the proposed multiplier is verified on the SoC-design verification kit which embeds ALTERA EXCALIBUR FPGAs. As a result of our experiment, the multi-segment Karatsuba multiplier, which has more efficient performance about twice times than the traditional multi-segment multiplier, can be implemented as adding few H/W resources. Therefore the multi-segment Karatsuba multiplier which satisfies performance for the cryptographic algorithm, is adequate for a low cost embedded system, and is implemented in the minimum area.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.4
• /
• pp.105-111
• /
• 2003

Qualification Model of On-board Computer (OBC) for KAISTSAT-4 was developed. The OBC of KAISTASAT-4 has some improved features compared with that of KAISTSAT-3: To reduce weight and size of OBC many logics are implemented by FPGAs, and a network controller is included in OBC to access the satellite network with high speed. Also, the developed OBC has an improved tolerance against SEUs and faults. The OBC was fully tested under simulated space environment with no errors.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.2
• /
• pp.228-233
• /
• 2000

It is common to apply the technology of FPGA (Fie이 Programmable Gate Array) which is one of the design methods for ASIC(Application Specific IC)to the active components used in the data processing at the digital system of satellite aircraft missile etc for compact lightness and integration of Printed Circuit Board (PCB) In carrying out the digital data processing the FPGAs are designed for the various functions of the Process Control Interrupt Control Clock Generation Error Detection and Correction (EDAC) as the individual module. In this paper an FPGA chip for Single Error Correction and Double Error Detection (SEC-DED) for EDAC is designed and simulated by using a VLSI design software LODECAP.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.6
• /
• pp.1185-1194
• /
• 1997

It is necessary to control the frame memory to capture, edit and display images. This paper presents the free-scale image capture processor size of which is user-defined, compared to the conventional image capture processor size of which is fixed 1/2, 1/4 and full size. User-defined scale data is fed into this system, which generates the gating pulses and gates the inputted image data. This system also controls the 4M DRAM instead of frame meamory. And stored gated image data are displayed on the TV monitor. We designed the scalable image capture parts and DRAM controller with ACTEL FPGAs, simulated the circuits with Viewlogic and fusing ACTEL A1020B chips. We confirmed the whole operation with beadboard which composed of "Philips TV Chipset" and designed FPGA chips.PGA chips.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.11
• /
• pp.2365-2374
• /
• 1997

This paper describes two algorithms for technology mapping of multiple output functions into interesting and pupular FPGAs(Field Programmable Gate Array) that use look-yp table memories. For improvement of technology mapping for FPGA, we use the functional decompoition method for multiple output functions. Two algorithms are proposed. The one is the Roth-Karpalgorithm extended for multiple output functions. The other is the efficient algorithm which looks for common decomposition functions through the decomposition procedure. The cost function is used to minimize the number of CLBs and nets and to improve performance of the network. Finally we compare our new algorithm with previous logic design technique. Experimental resutls show sigificant reduction in the number of CLBs and nets.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.10
• /
• pp.177-185
• /
• 1996

This paper describes several algorithms for technolgoy mapping of logic functions into interesting and popular FPGAs that use look-up table memories. In order to improved the technology mapping for FPGA, some existing multi-level logic synthesis, decomposition reduction and packing techniques are analyzed and compared. And then new algorithms such as merging fanin, unified reduction and multiple disjoint decomposition which are used for combinational logic design, are proposed. The cost function is used to minimize the number of CLBs and edges of the network. The cost is a linear combination of each weight that is given by user. Finally we compare our new algorithm with previous logic design technique. In an experimental comparison our algorithm requires 10% fewer CLB and nets than SIS-pga.