• Proceedings of the KSR Conference
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1195-1201
• /
• 2011

Since the release of safety standard IEC 61508 which defines functional safety of electronic safety-related systems, SIL(Safety Integrity Level) certification for railway systems has gained lots of attention lately. In this paper, we propose a new design technique of the computer board for train control systems with high reliability and safety. The board is designed with TMR(Triple Modular Redundancy) using a certified SIL3 Texas Instrument(TI)'s TMS570 MCU(Micro-Controller Unit) to guarantee safety and reliability. TMR for the control device is implemented on FPGA(Field Programmable Gate Array) which integrates a comparator, a CAN(Controller Area Network) communication module, built-in self-error checking, error discriminant function to improve the reliability of the board. Even if a malfunction of a processing module occurs, the safety control function based on the proposed technique lets the system operate properly by detecting and masking the malfunction. An RTOS (Real Time Operation System) called FreeRTOS is ported on the board so that reliable and stable operation and convenient software development can be provided.

• Journal of Digital Convergence
• /
• 제11권2호
• /
• pp.287-297
• /
• 2013

In this paper, we propose an efficient variable-length radix-8/4/2 FFT architecture for OFDM systems. The FFT processor is based on radix-8 FFT algorithm and also supports radix-4 or radix-2 FFT computation. We are using efficient "In-place" memory access method to maintain conflict-free data access and minimize memory size. Also we replace a very large lookup table with a twiddle factor generator which consumes less area then a ROM-based lookup table. The proposed FFT processor performs variable-length FFT including 64, 256, 512, 1024, 2048, 4096 and 8192 points which cover all the required FFT lengths used in 802.11a, 802.16a, DAB, DVB-T, VDSL and ADSL.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• 제35S권11호
• /
• pp.28-36
• /
• 1998

In the CDMA mobile communication system with asynchronous mode among base stations, the initial PN code acquisition method using a matched filter can be considered for the rapid PN code synchronization acquisition in the handoff region. In the model of the noncoherent QPSK/DS-SS under the Rayleigh fading channel, the mean acquisttion time of the matched filter is analyzed to have a shortened time in proportion to the length of matched filter to be compared with the serial correlation method. In this paper to improve the HW complexity of the conventional matched device which enables the repeated correlation process, is designed and its function is verified through the FPGAsimulation using Altera MaxPlus Ⅱ.

• Journal of IKEEE
• /
• 제13권4호
• /
• pp.57-62
• /
• 2009

In this paper, to implement PCS (Physical Coding Sublayer) of 10GBASE-R type, we present 2 stage pipeline 64b/66b Encoder/Decoder which operates at 156.25MHz standard specification and designed to minimize clock latency as possible as we can. The proposed circuit was designed based on Verilog hardware description language and measured for functional verification on VertexII-1000fg456 chip of Xilinx Inc.. Total equivalent gate count is 47,303 and estimated power consumption is 351mW at Vcc 3.3V.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제16권7호
• /
• pp.4871-4877
• /
• 2015

This article presents a circuit and a system for IEEE 1588 based clock synchronization to generate a very accurate frequency signal required in femtocell devices. A prototype board and the experimental environment to verify the functions and to evaluate the performance are explained to verify the feasibility of the proposed synchronization system. To make low-cost femtocells without constraints on the place of installation, it is very important to study on the practical implementation of synchronization system based on IEEE 1588. The experimental result shows that the synchronization errors between -16 ns and 9 ns are guaranteed over the network of femtocell devices with the proposed synchronization circuits, thus the synchronization criteria of the 3GPP HNB are met.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.461-466
• /
• 2003

This paper presents the speed control of the surface-mounted permanent-magnet synchronous motors (SMPMSM) for the elevator drive. The elevator motor needs to be a compact and slim type. Essentially, the proposed scheme uses a vector control algorithm for a speed and torque control. This system is implemented using a high speed 32-bit DSP (TMS320C31-50), a high-integrated logic device FPGA (EPF10K10-Tl144-3) to design compactly and Inexpensively The proposed scheme is verified through digital simulation and experiments for a three-phase 13.3kW SMPMSM as a MRL(MachineRoomless) elevator motor ill the laboratory. Finally, experiment of the test tower was performed with a 48kW PWM converter-inverter system for a high- speed elevator .

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제2권2호
• /
• pp.133-138
• /
• 2002

In this paper, we propose an integrated GUI environment of parallel fuzzy inference system fur pattern classification of remote sensing data. In this, as 4 fuzzy variables in condition part and 104 fuzzy rules are used, a real time and parallel approach is required. For frost fuzzy computation, we use the scan line conversion algorithm to convert lines of each fuzzy linguistic term to the closest integer pixels. We design 4 fuzzy processor unit to be operated in parallel by using FPGA. As a GUI environment, PCI transmission, image data pre-processing, integer pixel mapping and fuzzy membership tuning are considered. This system can be used in a pattern classification system requiring a rapid inference time in a real-time.

• ETRI Journal
• /
• 제36권1호
• /
• pp.12-21
• /
• 2014

In this paper, we propose a new digital blind in-phase/quadrature-phase (I/Q) mismatch compensation technique for image rejection in a direct-conversion receiver (DCR). The proposed image-rejection circuit adopts DC offset cancellation and a sign-sign least mean squares (LMS) algorithm with a unique step size adaptation both for a fast and precise I/Q mismatch estimation. In addition, several performance-optimizing design considerations related to accuracy, speed, and hardware simplicity are discussed. The implementation of the proposed circuit in an FPGA results in an image-rejection ratio (IRR) of 65 dB, which is the best performance with modulated signals, along with an adaptation time of 0.9 seconds, which is a tenfold increase in the compensation speed as compared to previously reported circuits. The proposed technique will be a promising solution in the area of image rejection to increase both the speed and accuracy of future DCRs.

• Proceedings of the Korean Information Science Society Conference
• /
• 한국정보과학회 2006년도 가을 학술발표논문집 Vol.33 No.2 (C)
• /
• pp.575-580
• /
• 2006

인터넷 네트워크에 존재하는 방화벽(Firewall) 또는 라우터(Router) 장비에서의 패킷 필터 기능은 모든 방화벽 장비의 기본적인 기능이 될 수 있다. 하지만 최근에 등장한 세션기반의 악의적 침입과 바이러스의 출현으로 패킷 필터기는 단순한 정적 패킷 필터 기능이 아닌 상태기반 패킷 필터의 동적 패킷 필터 기능을 요구하게 되었다. 또한 최근에 인터넷 속도가 급증하는 환경변화에 맞추어 방화벽 장비의 TCP 패킷 처리기능은 매우 빠른 처리속도를 요구하고 있다. 이에 우리는 매우 빠른 고속의 TCP 상태기반 패킷 필터 처리를 요구하는 에지(Edge)급 라우터의 방화벽 옵션카드를 만들기 위해 하드웨어 기반의 TCAM(Ternary CAM) 관리를 이용한 TCP 세션 상태기반 (Stateful) 패킷 필터기를 구현하였으며, TCAM 제어와 패킷의 상태기반 검사 등 모든 기능처리는 FPGA(Field Programmable Gate Array)를 이용한 하드웨어 로직(Logic) 및 상태기(State Machine)로 구현하였다. 그리고 본 논문의 구현방식을 적용한 방화벽 옵션카드는 인-라인(In-line) 모드로 구성될 경우 1GHz 이상의 Wire Speed를 만족하는 처리성능을 보여주었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2003년도 춘계종합학술대회
• /
• pp.390-393
• /
• 2003

In this paper, we study on an implementation of cell scheduler which arbitrates the ATM exchange efficiently and swiftly. The designed ATM cell scheduler of this paper is based on iSLIP scheduling algorithm. It is aimed at the high-speed implementation. The implemented cell scheduler approximately provides 100% throughput for cell scheduling. We present a basic structure for cell scheduler and describe by using the HDL and perform behavior level and timing simulation. The cell scheduler of this paper is designed to support 8-port switch fabric and can expand in 32-port switch fabric. The cell scheduler for supporting the 8-port switch fabric is designed in 2-stage pipelines for the grant and accept stages respectively.