• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.652-654
• /
• 2016

This paper shows the Design and implementation of sinusoidal BLDC motor drive logic using SVPWM method with FPGA. Sinusoidal BLDC motor driver logic consists of sine-wave PWM generator, dead-time and lead angle control logic. PWM generator logic is designed using SVPWM method for increase of 15.5% linear domain than general sine-wave PWM. This logic is verified and implemented using Spartan-6 FPGA Board. Test results show that THD(Total Harmonic Distortion) of motor-driving current is 19.2% and rotor position resolution is 1.6 degree.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.11
• /
• pp.1377-1383
• /
• 2019

Histogram equalization is the most frequently used algorithm for image enhancement. Its hardware implementation significantly outperforms in time its software version. The overall performance of FPGA-based implementation of histogram equalization can be improved by applying pipelining in the design and by exploiting the multipliers and a lot of SRAM blocks which are embedded in recent FPGAs. This work proposes how to implement a fast histogram equalization circuit for 8-bit gray level images. The proposed design contains a FIFO to perform equalization on an image while the histogram for next image is being calculated. Because of some overlap in time for histogram equalization, embedded multipliers and pipelined design, the proposed design can perform histogram equalization on a pixel nearly at a clock. And its dual parallel version outperforms in time almost two times over the original one.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.202-206
• /
• 2012

In this paper, we proposed on the direction of self-repairing mimicking the cell on the digital system design. Three-dimensional array of cells rather than using the original structure of FPGA, an array of blocks for efficient error detection methods were investigated. With a certain regularity, so the design method in detail by dividing the full array. The digital circuits can be detected fault location easily and quickly.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.2
• /
• pp.228-233
• /
• 2000

It is common to apply the technology of FPGA (Fie이 Programmable Gate Array) which is one of the design methods for ASIC(Application Specific IC)to the active components used in the data processing at the digital system of satellite aircraft missile etc for compact lightness and integration of Printed Circuit Board (PCB) In carrying out the digital data processing the FPGAs are designed for the various functions of the Process Control Interrupt Control Clock Generation Error Detection and Correction (EDAC) as the individual module. In this paper an FPGA chip for Single Error Correction and Double Error Detection (SEC-DED) for EDAC is designed and simulated by using a VLSI design software LODECAP.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.6
• /
• pp.1306-1311
• /
• 2012

In this paper, we proposed on the direction of self-repairing mimicking the cell on the digital system design. Three-dimensional array of cells rather than using the original structure of FPGA, an array of blocks for efficient error detection methods were investigated. With a certain regularity, so the design method in detail by dividing the full array. The digital circuits can be detected fault location easily and quickly.

• Proceedings of the KAIS Fall Conference
• /
• 2002.11a
• /
• pp.159-162
• /
• 2002

본 논문에서는 대역확산 방식으로 제안되고 있는 CDMA 시스템의 송수신 모뎀을 FPGA를 이용하여 설계 및 검증을 수행하였다. 송신기에서는 Walsh code(N=16), PN(7 stage=127chip)code를 데이터에 곱하여서 송신하고, 수신기에서는 송신기에서 사용했던 Walsh code(N=16)와 PN code를 사용하여 역확산 후 source data를 확인하였다. 송수신기의 설계는 Xilinx사의 FPGA 디자인 툴인 Xilinx foundation3.1을 사용하여 VHDL simulation을 수행하였고, FPGA 회로설계 검증 장비인 EDA-Lab 3000 장비를 사용하여 Xilinx사의 SPARTAN2 2S100PQ208칩에 다운로드 한 후 에뮬레이션 툴 인 Design-Pro shop을 사용하여 설계된 회로의 동작을 확인하였다.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.2
• /
• pp.252-256
• /
• 2003

A biped robot should be designed to be an effective mechanical structure and have smaller hardware system if it is to be a stand-alone structure. This paper shows the design methodology of a biped robot controller using FPGA(Field Programmable Gate Array). A hardware system consists of DSP(Digital Signal Processor) as the main CPU, and FPGA as the motor controller. By using FPGA, more flexible hardware system has been achieved, and more compact and simple controller has been designed.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2315-2318
• /
• 2003

The Wavelet Transform has been applied in mathematics and computer sciences. Numerous studies have proven its advantages in image processing and data compression, and have made it a basic encoding technique in data compression standards like JPEG2000 and MPEG-4. Software implementations of the Discrete Wavelet Transform (DWT) appears to be the performance bottleneck in real-time systems in terms of performance. And hardware implementations are not flexible. Therefore, FPGA implementations of the DWT has been a topic of recent research. The goal of this thesis is to investigate of FPGA implementations of the DWT Processor for image compression applications. The DWT processor design is based on the Lifting Based Wavelet Transform Scheme, which is a fast implementation of the DWT The design uses various techniques. The DWT Processor was simulated and implemented in a FLEX FPGA platform of Altera

• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.131-139
• /
• 2013

This paper describes the design and implementation of a small avionics unit based on soft CPU. A small avionics unit is developed with the soft CPU which can be wholly implemented in FPGA using logic synthesis. Design and integration of a modular architecture for versatile, reconfigurable and re-adaptable is presented with the Nios-II processor. To gain modular architecture, both at main board and sub-board level, attention has been paid to the selection of interfaces and an adequate data and power bus.

• Journal of Digital Contents Society
• /
• v.6 no.3
• /
• pp.169-174
• /
• 2005

In this paper we propose efficient design and implementation of JPEG image display board that can display JPEG image on TV. we used NAND Flash Memory to save the compressed JPEG bit stream and video encoder to display the decoded JPEG mage on TV. Also we convert YCbCr to RGB to super impose character on JPEG image. The designed B/D is implemented using FPGA.