• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.2
• /
• pp.179-185
• /
• 2015

The main objective of thermal design for a space-borne FPA(Focal Plane Assembly) is to provide stable thermal environment during imaging operation and thus maintain the image quality. An FPA must be maintained within its operating temperature range and cooled down to its initial temperature soon enough for the next imaging operation. This paper describes the study result on performing trade-off studies for FPA thermal design by using simplified thermal node analysis about FPA preliminary design. It also describes the verification results of the study by comparing thermal analysis results and trade-off study results. According to results, we can conclude that this approach is useful for simple and quick trade-off studies without thermal analysis based on thermal math models.

• Korean Journal of Food Science and Technology
• /
• v.29 no.1
• /
• pp.38-43
• /
• 1997

Free phenolic acids (FPA), soluble phenolic acid esters (SPA) and insoluble-bound phenolic acids (IPA) were extracted from defatted Perillae semen flour and the antioxidative components in FPA extract was separated by column chromatography and HPLC. Total phenolic content of defatted Perillae semen flour was 0.38% as chlorogenic acid and each percent ratio of the content of FPA, SPA and IPA to total phenolic content was 71.1%, 15.8% and 13.1%, respectively. The antioxidative activity was compared by measuring of electron donating ability (EDA) and thiobarbituric acid value (linoleic acid substrates). The FPA extract was showed the highest antioxidative activity among the three kinds of phenolic extracts. The FPA extract showing the highest antioxidative activity was separated by silica gel column chromatography and then the separated fractions were compared in terms of antioxidative activity. The fractions of acetone : methanol (8 : 2) showing the highest antioxidative activity was further separated by HPLC. Five fractions (F-I, F-II, F-III, F-IV and F-V) were observed on the HPLC chromatogram and F-I fraction showed the highest antioxidative activity.

• Journal of Life Science
• /
• v.13 no.1
• /
• pp.118-127
• /
• 2003

$\rho$-Fluorophenylalanine (FPA), a phenylalanine analog, is able to induce apoptotic cell death of human acute leukemia Jurkat T cells. To better understand the mechanism by which FPA induces apoptotic cell death, the effect of ectopic expression of antiapoptotic proteins, Bcl-2 and Bcl-xL, on FPA-induced apoptosis was investigated by employing lurkat T cells transfected with Bcl-2 gene (JT/Bcl-2) or Bcl-xL gene (1/Bcl-xL) and Jurkat T cells transfected with vector (JT/Neo or J/Neo). When Jurkat T cells, JT/Neo or J/Neo, were exposed to FPA at concentrations ranging from 0.63 to 5.0 mM, the cell viability determined by MTT assay declined in a dose-dependent manner. In addition, apoptotic DNA fragmentation along with several apoptotic events such as caspase-8 activation, Bid cleavage, mitochondrial cytochrome c release, caspase-9 activation, caspase-3 activation, and degradation of PARP was induced. However, the FPA-induced cytotoxic effect, activation of caspase-8, and cleavage of Bid were significantly abrogated by ectopic expression of Bcl-2 or Bcl-xL. At the same time, there was marked reduction in the level of cytochrome c release from mitorhondria, caspase-9 activation, caspase-3 activation, and degradation of PARP. These results indicate that caspase-8 activation, Bid cleavage, and mitochondrial cytochrome c release with subsequent activation of the caspase cascade are negatively regulated by Bcl-2 or Bcl-xL, and are thus required for FPA-induced apoptosis in Jurkat T cells

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.30.1-30.1
• /
• 2005

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.12
• /
• pp.1886-1891
• /
• 2012

In this paper, the analytical models for the electrothermal feedback of a ${\mu}$-bolometer focal plane array(FPA) are proposed and applied to the conceptually designed FPA to investigate the electrothermal feedback effect on bolometer FPA signal. The temperature and resistance change of the ${\mu}$-bolometer by the electrothermal feedback(ETF) model are increased upto 20 and 35.7 % of those of no feedback case, respectively, while those by the effective thermal conductance(ETC) model increased 8.5 and 15.1 %. The integration current and output voltage of a CTIA used as an column amplifier of FPA are also increased upto 41.6 and 32.4 % by the ETF model, while increased upto 17.2 and 13.5 % by the ETC model. The proposed models give more accurate temperature change, accordingly larger signal than no feedback considering case. Electrothermal feedback effect should be considered to design a high performance and high density ${\mu}$-bolometer FPA. The proposed models are very useful to investigate the transient thermal analysis, also considered to be useful to predict the responsivity and dynamic range of ${\mu}$-bolometer FPAs.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.6
• /
• pp.580-585
• /
• 2009

Thermal analysis and design of FPA(Focal Plane Assembly)-CU(Cooling Unit) for Earth observation camera is performed. FPA-CU is the first cooling device for a spacecraft which is designed and manufactured by its own technology in Korea. FPA-CU has a special feature, TBM(Thermal Buffer Mass) which is discriminated from typical cooling devices using heat pipes and radiator. TBM can be regarded as a thermal energy reservoir and it shows thermally transient characteristics, which make it difficult to design the size and shape of TBM. In current study, a method to determine the volume and the size of TBM is proposed and validated. The transient thermal analysis for FPA-CU for 5 operational scenarios is performed and validates the final design of FPA-CU (Radiator,TBM, Heat pipe I/F). In case of an abnormal operation of a heat pipe among three radiator heat pipes, the temperature of FPA can be increased $3{\sim}4^{\circ}C$ according to the numerical simulation.

• Journal of the Korean Vacuum Society
• /
• v.20 no.1
• /
• pp.22-29
• /
• 2011

An infrared thermographic imaging module of [$320{\times}256$] focal-plane array (FPA) based on [InAs/GaSb] strained-layer superlattice (SLS) was fabricated, and its images were demonstrated. The p-i-n device consisted of an active layer (i) of 300-period [13/7]-ML [InAs/GaSb]-SLS and a pair of p/n-electrodes of (60/115)-period [InAs:(Be/Si)/GaSb]-SLS. FTIR photoresponse spectra taken from a test device revealed that the peak wavelength (${\lambda}_p$) and the cutoff wavelength (${\lambda}_{co}$) were approximately $3.1/2.7{\mu}m$ and $3.8{\mu}m$, respectively, and it was confirmed that the device was operated up to a temperature of 180 K. The $30/24-{\mu}m$ design rule was applied to single pixel pitch/mesa, and a standard photolithography was introduced for [$320{\times}256$]-FPA fabrication. An FPA-ROIC thermographic module was accomplished by using a $18/10-{\mu}m$ In-bump/UBM process and a flip-chip bonding technique, and the thermographic image was demonstrated by utilizing a mid-infrared camera and an image processor.

• The KIPS Transactions:PartA
• /
• v.10A no.6
• /
• pp.671-676
• /
• 2003

In this paper, we proposed a new First Partial product Addition (FPA) architecture with new compressor (or parallel counter) to CSA tree built in the process of adding partial product for improving speed in the fast parallel multiplier to improve the speed of calculating partial product by about 20% compared with existing parallel counter using full Adder. The new circuit reduces the CLA bit finding final sum by N/2 using the novel FPA architecture. A 5.14nS of multiplication speed of the $16{\times}16$ multiplier is obtained using $0.25\mu\textrm{m}$ CMOS technology. The architecture of the multiplier is easily opted for pipeline design and demonstrates high speed performance.

• The monthly packaging world
• /
• s.364
• /
• pp.110-116
• /
• 2023

미국 연포장협회(Flexible Packaging Association∙FPA)는 최근 제67회 '2023 우수 연포장상'(2023 Flexible Packaging Achievement Award) 수상작을 발표했다. 수상작은 지난 3월 미국 플로리다주 아멜리아섬 리츠칼튼에서 열린 '2023년 FPA 연차 총회'와 함께 열린 'FPA 웰컴 디너 & 플렉시블 포장 공로상'시상식을 통해 공개됐다. 대회 수상작들은 재료, 그래픽, 구조, 새로운 용도, 연장된 보관 수명 및 지속 가능성의 발전 등 시장의 기대와 요구를 충족하는 포장 솔루션을 선보였다. 올해 대회에서는 총 323개 출품작과 함께 87개 패키지 출품작이 제출(일부 패키지는 여러 카테고리에 포함)되었으며 30개의 패키지가 총 38개의 상을 수상했다. 지면을 통해서는 최고상과 골드어워드 수상작을 소개한다.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2001.10a
• /
• pp.435-440
• /
• 2001

The purpose of this study was to evaluate mesh size and water velocity for the growth of filamentous periphytic algae(FPA). The growth experiment was carried out in the constructed pilot waterway system with nutrient-rich treated wastewater. Growth rate of FPA was highest at water velocity about 10 cm/s. The maximum standing crop of FPA was $253\;{\mu}g\;chl.a/cm^{3}$, and an average of the net productivity was $3.92\;mgDW/cm^{2}/day\;or\;25.3\;{\mu}g\;chl.a/cm^{2}/day$. Biomass development and growth rates of FPA were highest at the net with 20mm mesh size during the fall season and 10mm mesh size during the winter season.