• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2545-2548
• /
• 2003

Reliability is the very important issue for nuclear fields. In this paper, an analysis method is suggested to evaluate the level of availability improvement by adding the fault diagnosis function in the control system of Reactor Protection System. The Failure Mode Effect Analysis(FMEA), MIL-HDBK-217F, and Makov modelling techniques are used for availability assessment.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.04a
• /
• pp.109-112
• /
• 2007

As buildings become higher, larger, and more complex, safety issues for construction workers working at such environments become more important. We analyzed 140 critical accident cases reported to the KOSHA(Korea Occupational Safety & Health Agency) for construction cranes and lifts by types of cranes and by patterns of accidents and causes. By finding out the accident's types and causes, we expect to develop an efficient measure for preventing similar accidents in the near future. The cases will be studied further and reexamined using the FMEA(Failure Mode and Effect Analysis) as a quantitative analysis method.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.475-476
• /
• 2011

전력공급의 안정성과 신회성을 높이기 위해 우리나라 배전선로에는 2002년부터 자동화가 추진되고 있으며 2010년을 기준으로 자동화 추진 대상 배전설비의 90% 이상이 자동화 설비로 교체되었다. 배전자동화는 고장의 조기검출과 고장복구 시간의 감소 등으로 배전선로의 전기 공급 신뢰도를 높인 것으로 평가되고 있지만 자동화 기기의 사용 증가로 인한 고장의 증가와 이에 따른 보수비용의 증가가 새로운 문제로 부각되고 있다. 본 논문에서는 우리나라 배전선로에서 사용되는 자동화용 단말장치에서의 고장현상에 대해 보고하고자 한다. 이를 위해 2009년부터 2009에 걸친 고장자료가 수집되었으며 이들 자료의 분석을 통해 주 고장모드를 확인하였다. 고장모드의 분석을 위해서는 제작자 및 운영자가 참여하여 FMEA(Failure mode and Effect Analysis) 방법을 사용하였으며 본 고에서는 이들에 대한 세부 내용을 기술하였다.

• Proceedings of the Safety Management and Science Conference
• /
• 2010.04a
• /
• pp.573-585
• /
• 2010

최근 철도차량은 안전성과 신뢰성 향상을 위해 점차 복잡하게 설계 제작되고, 품질에 대한 기대와 요구수준이 점차 높아짐에 따라 운영기관에서는 과학적이고 체계적인 예방 정비를 통한 안전성과 가용성 향상을 위해 노력하고 있다. 이러한 목적을 달성하기 위하여 여러 방안들이 연구되고 있으며, 대표적으로 신뢰성 기반 유지보수(RCM; Reliability Centered Maintenance)가 철도분야에 지속적으로 도입되고 있는 추세이다. 본 연구에서는 새로운 예방정비 기술로 대두되고 있는 RCM의 기본이론에 대한 고찰과 RCM의 일반적 실시 절차를 소개하고, RCM의 국제규격인 IEC 60300-3-11, NAVAIR 00-25-403, MIL-STD-2173을 비교 분석하여 이를 바탕으로 철도차량에 RCM 도입 시 효과적이고 적합한 절차 및 방안을 제시하고자 한다.

• Information and Communications Magazine
• /
• v.25 no.6
• /
• pp.3-11
• /
• 2008

사용 편의나 안전 서비스를 위해 자동차에 내장되는 전자장치(ECU: Electronic Control Unit)는 증가하고 분산 네트워크 구조에서 운영되도록 네트워크 기반 응용 SW는 더욱 복잡해진다. 복잡해지고 분산화되는 ECU에 적용 가능한 응용서비스 개발을 위해 운영체제에서부터 플랫폼 및 응용 SW에 이르기까지 다양한 분야의 산업 표준화가 진행되고 있다. 운영체제 분야에서는 OSEK/VDX, SW 플랫폼 및 응용서비스 분야에서는 AUTOSAR, 응용서비스의 안전과 신뢰성 검증을 위하여 IEC-61508등에 근거하는 FTA(Fault Tree Analysis) 및 FMEA(Failure Mode and Effect Analysis) 등을 SW 분야에서도 반영하는 추세이다. 본 논문에서는 자동차 전자장치에 사용되는 IT기술의 접목 분야별 표준화 동향과 각 국가 및 지역별 추진방향을 살펴본다.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.38-46
• /
• 2011

Recently railway operators are doing a lot of researches and studies in order to apply reliability technologies to their maintenance tasks. The maintenance in the aviation and the munitions industry has been developed enough to be benchmarked with the high quality reliability technologies; however, railway industry is still situated in a rudimentary stage with insufficient & limited data. 5678 Seoul Metropolitan Rapid Transit Corporation, which has 17 year experience of the EMU maintenance and system development, has made a constant effort for appling RCM (Reliability Centered Maintenance) to the maintenance for a few years. In this connection, the case study is to be introduced. This paper is based on 'RCM Gateway to World Class Maintenance' by Anthony M. Smith". The reliability technology are applied to the specific EMU and its system by 7 stages; accordingly, applying SMRT's maintenance experience, a unique standard for FMEA(failure mode effect analysis) & LTA(logical tree analysis) is established. Moreover, for reasonable and effective preventive maintenance tasks, the case considering an analysis of failure effects is selected in the final step 7. SMRT will develop reliability technologies through the application of the results to all the EMU systems.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.1
• /
• pp.91-101
• /
• 2009

The factors of uncertainty such as work delay could cause many problems, for example, increase of construction cost and terms of work, and the deterioration of quality. Because of these, the uncertainty risk is regarded as an important management factor to obtain the success of construction project. So, the systematic management plan about the uncertainty factors is needed because it plays an important role in the completion of entire project. And also analysis of some factors which can cause the work delay can be one way of improving construction project's certainty and making it competitive. In this reason, we have to make an effort to set a priority based on analysis of quantitatively numerical value about work delay factors to manage them effectively. Thus, this study aims to suggest the basic data for the effective management and prevention of work delay in steel-frame work which is progressive actively now, along with increasing of demand of high-rise buildings by analyzing each reasons of work delay factors and also by suggesting important management factors that are coded according to each construction work using FMEA method which could give a data about the importance of work delay factors through quantitatively numerical value.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2006.11a
• /
• pp.381-388
• /
• 2006

많은 6시그마 혁신을 하는 기업 중에서 IS09000 시리즈나 IS0/TS16949 인증을 받고 있다. 그럼에도 불구하고 6시그마 도입 초기부터 ISO/TS16949와 통합운영을 생각하고 추진하는 곳은 많지 않다. ISO/TS16949에서는 기업전반의 프로세스에 많은 중점을 두고 있다. 그 중에서도 APQP(Advanced Product Quality Planning)은 제품 초기에서 부터 명확한 품질계획 업무 프로세스를 가지고 활동을 하라는 필수 프로세스를 요구하고 있다. 그러나 구체적인 Flow나 단계는 각 기업체의 특성에 맞기고 있다. 6시그마의 Lean DFSS는 이러한 제품개발 프로세스의 구체적인 전개단계를 제공 하고 있다. 여기에 APQP에 서 요건으로 명시한 각 프로세스 단계마다 인풋(Input)요소, 아웃풋(Output) 요소, 타켓(Target), 그 프로세스를 책임질 구성원, 핵심성공요인(KSF), 핵심성공지수(KPI), 단계마다의 FMEA(Failure Mode Effect Analysis) 분석을 대응하면 도입 초기에서 부터 상호 유기적이면서 효과적인 System이 된다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.509-514
• /
• 2002

This paper studies on the noise reduction for a small automobile DC Motor (a window motor) using the 6 sigma process. The application of 6 sigma process suggested reliable and valuable statistical data for the quality of the DC motor at the production line. In the measurement step in 6 sigma process, the FMEA(Failure Mode Effect Analysis) were used for the detection of noise sources. The application of 6 sigma process gave not only the improving method for the quality of the DC motor but also the confidence of improvement itself since it was done on the basis of the test results for a number of DC motors at the production line. Consequently the 6 sigma process was proved very effective for the noise reduction at the production line.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.5
• /
• pp.163-170
• /
• 2005

Urban transit is a complex system that is combined electrically and mechanically, it is necessary to construct maintenance system for securing safety accompanying high-speed driving and maintaining promptly. Expert system is a computer program which uses numerical or non-numerical domain-specific knowledge to solve problems. In this research, we intend to develop the expert system which diagnose failure causes quickly and display measures. For the development of expert system, standardization of failure code classification system and creation of BOM(Bill Of Materials) have been first performed. Through the analysis of failure history and maintenance manuals, knowledge base has been constructed. Also, for retrieving the procedure of failure diagnosis and repair linking with the knowledge base, we have built RBR(Rule Based Reasoning) engine by pattern matching technique and CBR(Case Based Reasoning) engine by similarity search method. This system has been developed based on web to maximize the accessibility.