• Electronics and Telecommunications Trends
• /
• v.21 no.4 s.100
• /
• pp.22-33
• /
• 2006

방송의 디지털 전환은 기존의 아날로그 방송에 비해 획기적으로 새로운 HD 화질과 3D입체음향의 방송 서비스가 가능하게 하였을 뿐만 아니라, 아날로그 방송에서는 불가능하였던 이동멀티미디어 방송이라는 새로운 서비스가 출현하게 하였다. 이동멀티미디어방송은 TV를 집 밖으로 이끌어내어 차를 타고 갈 때, 걸어갈 때 및 자리를 옮겨 다닐때도 휴대단말기를 통해서 언제 어디서나 원하는 TV 시청 및 음악 청취를 할 수 있는방송 서비스를 실현함으로써, 방송과 통신의 컨버전스를 유도하는 역할 및 나아가서 유비쿼터스 방송망 구성에 적용성을 제시하는 등 우리의 삶에 새로운 시대를 열어가고 있다. 현재 지상파 이동멀티미디어 방송 시스템은 세계적으로 매우 활발하게 연구 및 서비스가 추진중이며, 대표적인 예로는 크게 World DAB를 중심으로 한 T-DMB, DVB를 중심으로 한 DVB-H 그리고 Qualcomm을 중심으로 한 Media FLO 등이 있다. 본고에서는 지상파 이동멀티미디어 방송시스템에 대한 소개와 각 시스템의 표준화 및 서비스 추진 현황에 대해 소개한다.

• Electronics and Telecommunications Trends
• /
• v.23 no.5
• /
• pp.99-110
• /
• 2008

3차원 입체 영상은 기존의 2차원 평면 영상과는 달리 사람이 보고 느끼는 실제 영상과 유사하여 시각정보의 질적 수준을 몇 차원 향상시키는 새로운 개념의 실감 영상 미디어이다. 3차원 영상단말기 기술은 멀티미디어의 기술발전을 기반으로 하여 통신, 방송, 신호처리 등 다른 분야의 기술들이 모두 집약되어 있다. 방송의 경우 현재 DMB, DVB-H 및 FLO와 같은 모바일 방송 시스템을 통해서 3차원 TV 서비스가 가능하고 기존 이동 통신망이나 와이브로 또는 와이맥스 망을 통해서도 3차원 서비스의 제공이 가능하다. 본 고에서는 3차원 서비스의 제공이 가능한 모바일 방송 및 통신 시스템과 관련된 국내.국제 기술 동향을 소개하고자 한다.

• Journal of the Korean Vacuum Society
• /
• v.9 no.1
• /
• pp.24-29
• /
• 2000

MgO thin films were deposited on soda lime glass substrates by rf magnetron sputtering using a MgO target at various oxygen flow ratios in order to probe the relationship between MgO film properties and discharge characteristics. MgO films have a tendency to form microstructures with a preferred growth orientation of (200) with increasing oxygen flo ration up to 0.1 $O_2$/(Ar+$O_2$). MgO film obtained at 0.1[$O_2$/(Ar+$O_2$)] was found to be fully stoichiometric. The stoichiometric MgO film was observed to have relatively very clean surface and grains of large size and contain almost no hydroxyl group. The AC PDP with fully stoichiometric MgO film showed lower firing and sustain voltages than those with magnesium-rich or oxygen-rich MgO films, being largely attributed to the larger grain size and the minimized hydroxyl group.

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.333-334
• /
• 2010

본 논문에서는 풍력발전기용 전력변환기의 소자에서 발생하는 열을 효율적으로 냉각시키기 위한 수냉식 방열판의 구조를 제안한다. 인버터 IGBT의 방열을 위한 방열판의 구조는 전체 stack의 방열시스템에서 중요한 부분을 차지하며, 인버터 시스템의 전력밀도 향상을 위해서 시스템 내부 구조가 콤팩트 해야하기 때문에 방열판에 대한 설계 및 방열구조 설계의 연구는 필수적이라 할 수 있다. 본 논문에서는 발열원을 기준으로 수로의 숫자와 형태변화를 통해 방열현상을 CosmosFloXpress를 통해 해석하여 방열효과가 우수한 방열판을 선정하였다. 추후 시뮬레이션 결과를 토대로 배관구조를 적용한 전력변환기의 제작 및 실험을 통해 제안된 모델의 타당성을 검증하고자 한다.

• Journal of Korean Society of Water and Wastewater
• /
• v.37 no.6
• /
• pp.383-394
• /
• 2023

Currently, there is no definitive regulation for the appropriate frequency of data sampling in water distribution networks, yet it plays a crucial role in the efficient operation of these systems. This study proposes a new methodology for determining the optimal frequency of data acquisition in water distribution networks. Based on the decomposition of signals using harmonic series, this methodology has been validated using actual data from water distribution networks. By analyzing 12 types of data collected from two points, it was demonstrated that utilizing the factors and cumulative periodograms of harmonic series enables similar accuracy at lower data acquisition frequencies compared to the original signals. Type your abstract here.

• Journal of Oral Medicine and Pain
• /
• v.30 no.2
• /
• pp.269-276
• /
• 2005

This in vitro study evaluated the influence of a flowable composite resin on the tensile bond strength of resin to enamel and dentin treated with Er:YAG laser and diamond bur. 96 Buccal enamel and mid-coronal dentin were laser-irradiated using an Er:YAG laser and treated with diamond bur. Each groups(48) were divided two small groups depends on acid-etching procedure. Light-cure flowable resin(Metafil Flo) and self-cure resin(Clearfil FII New Bond) were used in this study. After surface etching with 37% phosphoric acid and the application of an adhesive system, specimens were prepared with a hybrid composite resin. After 24hours storage in distilled water at 37$^{\circ}C$, all samples were submitted to the tensile bond strength evaluation, using a universal testing machine(Z020, Zwick, Germany). The obtained results were as follows: 1. TBS of acid-etching group were higher than those of non-etching group in both enamel and dentin treated with Er:YAG laser and diamond bur. Laser 'conditioning' was clearly less effective than acid-etching. Moreover, acid etching lased enamel and dentin significantly improved the microTBS of M-Flo. 2. In enamel, TBS of laser-irradiated group were lower than those of bur-prepared group. However, in flowable resin subgroup, there were not differed those between two groups in dentin. 3. In laser-treated group, TBS of flowable composite resin were higher than those of self-curing resin in dentin, however, there was no difference in enamel. From this study, we can conclude that the self- and light-cure composite resin bonded significantly less effective to lased than to bur-cut enamel and dentin, and that acid-etch procedure remains mandatory even after laser ablation. We suggest that Er:YAG laser was useful for preparing dentin cavity with flowable resin filling.

• The Journal of Engineering Geology
• /
• v.27 no.4
• /
• pp.393-403
• /
• 2017

Mountain disasters in Korea have caused massive social and economic damage. During the period 2005-2014 there has been an annual average of 7 deaths and disaster recovery costs of 79.8 billion won in the country's 4393 ha of mountainous areas. The primary mountain disasters are landslides on mountain slopes, and secondary debris flows can spread along mountain streams, damaging facilities and settlements in lower areas. Typhoons and local rainfall can cause such disasters, while anthropogenic factors include development that damages the mountainous terrain. The study area was divided into three basins. For each basin, a debris flow vulnerability assessment method was proposed considering FLO-2D analysis results and the local topography, geology, and forestation. To establish an in situ investigation, analysis, and evaluation plan for potential mountain disasters, we selected mountain basins that are potentially vulnerable to mountain disasters through analysis of their mountain slopes and streams. This work suggests the establishment of a comprehensive plan for disaster prevention based on a mountain basin feature.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.42 no.3
• /
• pp.169-178
• /
• 2006

This research aims at establishing the fundamental characteristics of the kite through the analysis of the flow field around various types of kites. The approach of this study were adopted for the analysis; visualization by CFD(computational fluid dynamics). Also, the lift/drag and PIV(particle image velocimetry) tests of kites had been performed in our previous finding. For this situation, models of canvas kite were designed by solidworks(design program) for the CFD test using the same conditions as in the lift/drag tests. And we utilized FloWorks as a CFD analysis program. The results obtained from the above approach are summarized as follows: According to comparison of the measured and analyzed results from mechanical tests, PIV and CFD test, the results of all test were similar. The numerical results of lift-coefficient and drag-coefficient were 5-20% less than those of the tests when attack angle is $10^{\circ},\;20^{\circ}\;and\;30^{\circ}$. In particular, it showed the 20% discrepancy at $40^{\circ}$. The numerical results of the ratio of drag and lift were 8-13% less than those of the tests at $10^{\circ}$ and 10% less than those of the tests at $20^{\circ},\;30^{\circ}\;and\;40^{\circ}$. Pressure distribution gradually became stable at $10^{\circ}$. In particular, the rectangular and triangular types had the centre of the high pressure field towards the leading edge and the inverted triangular type had it towards the trailing edge. The increase of the attack angle resulted in the eddy in order of the rectangular, triangular and inverted triangular type. The magnitude of the eddy followed the same order. The effect of edge-eddy was biggest in the triangular type followed by the rectangular and then the inverted triangular type. The action point of dynamic pressure as a function of the attack angle was close to the rear area of the model with the small attack angle, and with large attack angle, the action point was close to the front part of the model.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.4
• /
• pp.389-393
• /
• 2017

Purpose: The aim of this study is to evaluate the flexural strength of flexible resins and the flexibility of different resin splint (RS) systems in comparison with resin wire splint (RWS) system. Materials and methods: Three different resin materials (G-aenial flo, GA, GC; Superbond, SB, Sun medical; G-fix, GF, GC) were tested flexural strength test in accordance with ISO-4049:2000. For the flexibility test of splint systems, a artificial model with resin teeth was used to evaluate three types of resin splint systems (GA, SB, and GF) and one resin wire splint system. The left central incisor was simulated 'injured teeth' with third degree mobility. Three consecutively repeated measurements of periotest value were taken in horizontal direction, before and after splinting to access tooth mobility. The splinting effect was calculated through the periotest value. Differences were evaluated through One-way Anova and Tukey HDS post-hoc tests for pair-wise comparison (${\alpha}=.05$). Results: Although GA group showed significant higher flexural strength than SB and GF groups, all of three different resin splint systems produced a significantly higher and rigid splinting effect compared with 016" resin-wire splint system (P < .05). Conclusion: Within the limits of an in vitro study, it can be stated that resin splint systems are too rigid and may not be acceptable to treat tooth avulsion.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.1
• /
• pp.27-32
• /
• 2013

Purpose: The aims of this study were to evaluate the effect of a resin coating on the shear bond strength of indirect composite restoration bonded to dentin with a self adhesive resin cement and to compare the shear bond strength with that of a conventional resin cement. Materials and methods: The occlusal enamels of thirty six extracted noncarious human molars were removed until the dentin flat surfaces of the teeth were exposed. Then, they were divided into 3 groups. The dentin surfaces of group 1 and 3 were left without any conditioning, while the dentin surfaces of group 2 were resin-coated with Clearfil SE bond and a flowable resin composite, Metafil Flo. After all specimens were temporized for 24 hours, indirect composite resin blocks fabricated by Tescera were bonded to dentins by Unicem for group 1 and 2, and by Panavia F for group 3. After 48 hours of water storage, shear bond strengths were measured. The data was analyzed with one-way analysis of variance and multiple comparison test (Tukey method). Results: The shear bond strengths of Unicem applied to resin coated dentin surfaces were significantly higher than those of Unicem and Panavia F used to uncoated dentin surfaces (P<.0001). Conclusion: Application of a resin coating to the dentin surface significantly improved the shear bonding strength of a self adhesive resin cement in indirect restoration.