• Journal of Communications and Networks
• /
• v.5 no.4
• /
• pp.344-353
• /
• 2003

Ultra-wideband (UWB) technology is gaining increasing interest for its potential application to short-range indoor wireless communications. Utilizing ultra-short pulses, UWB baseband transmissions enable rich multipath diversity, and can be demodulated with low complexity receivers. Compliance with the FCC spectral mask, and interference avoidance to, and from, co-existing narrow-band services, calls for judicious design of UWB pulse shapers. This paper introduces pulse shaper designs for UWB radios, which optimally utilize the bandwidth and power allowed by the FCC spectral mask. The resulting baseband UWB systems can be either single-band, or, multi-band. More important, the novel pulse shapers can support dynamic avoidance of narrow-band interference, as well as efficient implementation of fast frequency hopping, without invoking analog carriers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.1
• /
• pp.175-186
• /
• 1996

An optimal channel input-traffic control (OCIC) policy is proposed for slotted frequency-hopped spread-spectrum multiple access communication systems. When the number of channel input packets is set to the optimal number, the conditional throughput for the OCIC policy is analyzed. The state transition probability is derived, the steady state performance is analyzed, and the mean pracket delay is obtained. It is shown that the mean packet delay decreases considerably when the priority of transmission is given to backlogged users. The smaller is the number of requency slots, the larger are the differences between the preformance of the OCIC policy and that of the other policies.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10c
• /
• pp.268-270
• /
• 2001

현재 ad hoc의 연구 방향은 무천 기반의 패킷 라우팅에 관련된 것이 대부뿐 이러 네트워크 토폴로지 생성에 대한 연구는 거의 진행된 것이 없다. 현재 대부분의 ad hoc 네트워크는 대표적인 싱글 채널 방식인 broadcast 기반의 무선 미디어 방식을 물리적 계층을 사용하며, 이를 기반으로 이동 노드의 무선 범위 제한을 극복하기 위한 형태로 네트워크 토폴로지를 형성한다. 블루투스(B1uetooth)는 frequency hopping(FH) 방식을 사용하므로 연결 설정 과정에서 동기화 과정이 반드시 요구되며, ad hoc 네트워크을 형성을 위해 다중 채널을 사용한다. 따라서 블루투스와 같이 다중 채널을 물리적 계층으로 사용하는 네트워크에서는 싱글 채널 방식과 달리 명시적으로 토폴로지를 형성하기 위한 메커니즘이 요구된다. 본 논문에서는 다중 채널과 블루투스가 탑재된 노드의 이질적 특성을 고려한 스캐터넷(Scatternet) 구성 메커니즘을 제안한다. 본 메커니즘은 칵 노드의 전력 상태와 이동성 정보를 바탕으로 스캐터넷의 마스터와 브리지 노드틀 선택 함으로서 효율적인 네트워크 토플로지를 구성한다.

• The korean journal of orthodontics
• /
• v.23 no.4 s.43
• /
• pp.475-483
• /
• 1993

The purpose of this study was to investigate the treatment effects on anterior crossbite patients using chin cap and labiolingual arch appliance. In the present study, I statistically evaluated measurement values on a cephalogram before and after treatment form twenty anterior crossbite cases. The results were as follows: 1. In the craniofacial patterns, cranial base increased after treatment. 2. In the maxillo-mandibular relationship, ANB and Facial convexity significantly increased. 3. In the denture patterns, occlusal plane, Ul to FH and Overjet significantly increased. On the contrary overbite decreased significantly. Lower incisors inclined lingually. 4. In the soft tissue profile changes, lower lip protrusion was signifacantly improved.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.07a
• /
• pp.94-100
• /
• 1990

The rapid quenching dynamics of the F-center excitation by CN- defects in CsCl crystals were investigated by monitoring the ground state bleach recovery kinetics of F-centers, using a picosecond streak camera absorption spectrometer. The F-centers in CN- doped quenched samples show two bleach recovery components. Optical aggregation converts the slow component to the fast component. The slow one is due to the normal relaxation of the F*-centers as found in CN_ free crystals. The fast one is due to the energy transfer of the F-center electronic excitation to the vibrational energy levels of CN_ molecualr defects. The energy transfer occurs only in the F-center-CN_ defect pairs, FH(CN_)-centers.

• Journal of the Korean Ceramic Society
• /
• v.23 no.3
• /
• pp.35-43
• /
• 1986

The equilibrium dsorption of starch on activated alumina and kaolin was studied to provide the fundamental data for investigating the effect of polymer adsorption on the flocculation of solid particles. The new polymer adsor-ption model(PAH-FH) predicting the adsorption equilibria of polymers on the solid surface has been developed using the solution theory and the concepts of Gibbs dividing surface in conjunction with the Flory-Huggins eq-uation and the adsorption behaviors of polymers were examined by this model The accurate adsorption equilibrium data of starch on alumina and kaolin were determined within the tempera-ture range of 298-318K by the ignition loss method. Using these experimenta data the model developed in this study was evaluated. It was shown that this model could predict the adsorption isotherm more accura-tely than the Langmuir model as well as could describe the characteristics of the adsorption equilibria through model parameters.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.5
• /
• pp.802-809
• /
• 2001

A linear power amplifier for the VHF frequency-hopping(FH) transmitter using an adaptive predistortion linearizer is designed. An analog polynomial linearizer as predistorter is employed. The recursive least square(RLS) algorithm is employed in the optimization process to minimize the errors between the predistorter and postdistorter output signals. Experimental results show that the adjacent channel power of the designed power amplifier is reduced by of 10 dB.

• Computers and Concrete
• /
• v.5 no.3
• /
• pp.175-194
• /
• 2008

Increasingly numerical (finite element) modeling of concrete hinges on our ability to develop a representative volume element with all its heterogeneity properly discretized. Yet, despite all the sophistication of the ensuing numerical models, the initial discretization has been for the most part simplistic. Whenever the heterogeneity of the concrete is to be accounted for, a mesh is often manually crafted through the arbitrary inclusion of the particles (aggregates and/or voids) in an ad-hoc manner. This paper develops a mathematical strategy to precisely address this limitation. Algorithms for the random generation and placement of elliptical (2D) or ellipsoid (3D) inclusions, with possibly radiating cracks, in a virtual concrete model are presented. Collision detection algorithms are extensively used.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.8
• /
• pp.2023-2032
• /
• 1996

In this paper, we calculate average bit error probabilities of asynchronous hybrid DS/FH-SSMA systems in AWGN chnnel and nonselective Rayleigh fading channel. We analyze and compare the performance of systems in AWGN channel and Rayleigh fading channel by using linear correlation receiver and hard limiting correlation receiver(nonlinear correlation receiver). Binary PSK scheme is considered and random spreading code sequences and random hopping patterns are used. Bit error probabilities of the systems with/without near-far problem under the same bandwidth expansion are calculated. the result shows that the performance of hard limiting correlation receiver is better than that of linear correlation receiver over nonselective Rayleigh fading channel.

• Journal of the Korean Society of Industry Convergence
• /
• v.8 no.1
• /
• pp.37-45
• /
• 2005

Adsorption equilibrium data of pure solvent vapors (n-Hexane, Toluene, MEK) as well as their binary mixtures on activated carbon (sorbonorit $B_4$) were experimentally determined in the range of 293.2~323.2 K and beyond saturated vapor pressure corresponding to experimental temperature. Langmuir, Freundlich, LRC, W-VSM, FH-VSM were estimated for the predication of single component as well as binary mixtuer systems. The isosteric heat of adsorption at infinite dilution of pure n-hexane, toluene, MEK on activated carbon were 45.18, 25.85, 34.62 Kcal/mol, respectively, also, n-hexane-toluene binary adsorption of activated carbon formed an azeotrope at 293.2 K and total pressure 5.1~10.3 mmHg.