• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권3호
• /
• pp.107-114
• /
• 2001

Electro-mechanical battery (EMB) consists of a high-speed fly wheel with an integral motor/ generator suspended on magnetic bearings and in an evacuated housing. Permanent magnet (PM) machines as the EMB motor/ generator are a popular choice, since there are no excitation losses which means substantial increase in the efficiency. In this paper we present the comparison of conventional slotted and slotless ring-wound types, aimed at EMB and other high-speed drives. We firstly discuss the topology of each machine for this particular application. these machines are primarily designed as 1kW two-pole PM generator with the rated speed of 40000 rpm. the motoring torque of 0.51 Nm has to be enough to accelerate the flywheel to the rated speed. We then present the comparison of the open-circuit field, the armature reaction field and winding inductance. next we analyze the induced voltage and the developed torque per unit stack length and unit weight of different machines. Finally, we estimate and compare the losses and the efficiency at motoring and generating modes.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권3호
• /
• pp.109-113
• /
• 2005

It has been reported that the failure phenomenon and variation of electrical characteristic due to the effect of electrostatic discharge(ESD) in silicon devices. But we had fess reports about the phenomenon due to the ESD in the compound semiconductors. So there are a lot of difficulty to the phenomenon analysis and to select the protection method of main circuits or the devices. It has not been reported that the relation between the ESD stress and GaN devices, which is remarkable to apply the operation in high temperature and high voltage due to the superior material characteristic. We studied that the characteristic variation of the AlGaN/GaN HEMT current, the leakage current, the transconductance(gm) and the failure phenomenon of device due to the ESD stress. We have applied the ESD stress by transmission line pulse(TLP) method, which is widely used in ESD stress experiments, and observed the variation of the electrical characteristic before and after applying the ESD stress. The on-current trended to increase after applying the ESD stress. The leakage current and transconductance were changed slightly. The failure point of device was mainly located in middle and edge sides of the gate, was considered the increase of temperature due to a leakage current. The GaN devices have poor thermal characteristic due to usage of the sapphire substrate, so it have been shown to easily fail at low voltage compared to the conventional GaAs devices.

• 전력전자학회논문지
• /
• 제12권3호
• /
• pp.267-275
• /
• 2007

본 논문은 현재 청정에너지의 개념으로 대두되고 있는 에너지원 가운데 기계적인 에너지로 저장하여 필요 시 꺼내어 사용할 수 있는 플라이휠 에너지 저장장치에 대한 에너지 입, 출력 모델링 및 PWM 인버터 시스템의 해석 및 제어에 관한 논문으로서, 플라이휠 저장장치 특성 및 시스템 모델링에 관해 논의한다. 재질에 따른 플라이휠의 특성과 플라이휠 에너지 저장장치의 속도 특성에 따른 전압과 전류의 변화량을 수식으로 간략화 하여 분석하고, 시뮬레이션을 통하여 플라이휠의 에너지 저장상태를 분석하였다. 또한, 부하측 전원의 이상유무에 관계없이 에너지를 공급할 수 있는 Online UPS로 사용하기 위해 PDFF 제어기법을 이용하여 전압제어 및 전류제어의 이중루프 제어로 구성된 단상 PW방식의 인버터 시스템 제작하였으며, 실험을 통하여 실제로 0.1[p.u], 1[p.u]에서의 제어되는 전압, 전류제어파형 및 THD 특성에 관하여 평가한다.