• 대한기계학회논문집A
• /
• 제34권11호
• /
• pp.1757-1763
• /
• 2010

플라이휠 에너지 저장 장치는 잉여 전기를 회전관성을 통해 운동 에너지로 저장하는 장치로, 회전의 중심이 되는 축과 외부의 플라이휠로 구성이 된다. 수치해석을 위한 일반적 프로그램들은 3차원의 모델을 통하여 구조해석 및 주파수 응답 등의 해석을 수행하게 된다. 허나 상용 프로그램을 이용한 동역학적 해석의 응용은 매우 어려운 실정이며, 사용자가 그 방법을 익히는 것 또한 쉽지 않다. 이러한 문제들을 보완하고자 동역학적 해석을 위한 프로그램을 2차원의 모델을 사용하여 구축하였다. 본 논문에서 제시한 모델링은 회전체를 2차원으로 표현함으로써 3차원에 비해 시스템의 표현을 보다 단순화하여 시스템의 구조를 쉽게 이해할 수 있도록 하였으며, 회전체를 서로 다른 재질의 다중 레이어로 모델이 가능하게 하였다. 또한 축계에 추가적 강성의 영향을 줄 수 있는 열박음 부분에 대하여, 그 영향 정도를 선택적으로 입력할 수 있게 하여 열박음에 대한 효과를 조정할 수 있도록 하였다. 따라서 본 논문에서 제시하는 2차원 모델을 이용한 동특성 해석 프로그램의 해석 오차를 알아보기 위해 상용 프로그램의 해석 결과와 비교하였으며, 모델링을 위한 시간과 해석 수행 시간 역시 비교하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.927-928
• /
• 2012

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.760-761
• /
• 2011

• 전기학회논문지
• /
• 제62권7호
• /
• pp.1045-1052
• /
• 2013

In this study we deal with design procedures for the flywheel energy storage system that has the capacity to store the regenerative energy produced from the railway vehicles. The flywheel energy storage system (FESS) stores the regenerative electrical energy into the high speed rotational flywheel, by conversion the electrical energy into the mechanical rotational energy. Thus the FESS is composed of the energy conversion components, such as the motor and generator, mechanical support components, such as the rotational rotor, the magnetic bearings to support the rotor, and the digital controller to control the air gap between the rotor and the magnetic bearings. In this paper the design procedures for the rotor operating at the rigid mode and the magnetic bearings to support the rotational rotor without contact are presented.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.13.1-13.11
• /
• 2019

Background: Maxillary sinusitis of odontogenic origin, also known as maxillary sinusitis of dental origin or odontogenic maxillary sinusitis (OMS), is a common disease in dental, otorhinolaryngologic, allergic, general, and maxillofacial contexts. Despite being a well-known disease entity, many cases are referred to otorhinolaryngologists by both doctors and dentists. Thus, early detection and initial diagnosis often fail to detect its odontogenic origin. Main body: We searched recent databases including MEDLINE (PubMed), Embase, and the Cochrane Library using keyword combinations of "odontogenic," "odontogenic infection," "dental origin," "tooth origin," "sinusitis," "maxillary sinus," "maxillary sinusitis," "odontogenic maxillary sinusitis," "Caldwell Luc Procedure (CLP)," "rhinosinusitis," "functional endoscopic sinus surgery (FESS)," "modified endoscopy-assisted maxillary sinus surgery (MESS)," and "paranasal sinus." Aside from the PRISMA (Preferred Reporting Items for Systematic reviews and Meta-Analyses) trial, there have been very few randomized controlled trials examining OMS. We summarized the resulting data based on our diverse clinical experiences. Conclusion: To promote the most efficient and accurate management of OMS, this article summarizes the clinical features of rhinosinusitis compared with OMS and the pathogenesis, microbiology, diagnosis, and results of prompt consolidated management of OMS that prevent anticipated complications. The true origin of odontogenic infections is also reviewed.

• 소음진동
• /
• 제8권1호
• /
• pp.81-86
• /
• 1998

A 500Wh class high-speed Flywheel Energy Storage System (FESS) driven by a built-in BLDC motor/generator has been designed, which runs from 30000 to 60000rpm nominally. Due to the motor/generator inside, the flywheel rotor made of composites supported by PM/EM hybrid bearing system has a shape of bell or pendulum and thus requires accurate rotordynamic analysis and prediction of its dynamic behavior to secure the operating reliability. Rotordynamic analyses of the flywheel rotor-bearing system revealed that the bell shaped rotor has two conical rigid-body modes in the system operating range and the first conical mode, of which nodal point lies in the radial EM bearing position, can adversely affect the dynamic response of the rotor at the corresponding critical speed. To eliminate the possibility of wild behavior of the rotor, two guide bearings are adopted at the upper end of the rotor and motor/generator. It was also revealed that the EM bearing stiffness if 0.5~1.0E+6 N/m and damping of 2000 Ns/m are favirable for smooth operation of the system around the 2nd critical speed.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권8호
• /
• pp.400-407
• /
• 1999

This paper treated the design, manufacture and the performance characteristics under each mode of high speed motor/generator for an electro-mechanical battery(EMB). This machine is employed as an integral part of a flywheel energy storage system(FESS), i.e., a modular flywheel system to be used as a device for storing electrical or mechanical energy. In this machine, the magnetic field system is constructed by using special magnet array, dipole Halbach array with 16 permanent magnet segments and the armature is composed of a plastic bobbin and multi-phase windings with Litz wire. The magnet array produces a highly uniform dipole field without back iron. The motor/generator is 3-phase machine in which the dipole Halbach array surrounding the winding is rotating. Since there are no iron laminations, this field system offers some unique advantages for the simplicity of the design and the theoretical prediction of characteristics of a high speed electric machine. This paper describes the results obtained when EMB system was tested in the laboratory.

• Journal of Power Electronics
• /
• 제12권5호
• /
• pp.758-768
• /
• 2012

This paper presents the modeling and position-sensorless vector control of a dual-airgap axial flux permanent magnet (AFPM) machine optimized for use in flywheel energy storage system (FESS) applications. The proposed AFPM machine has two sets of three-phase stator windings but requires only a single power converter to control both the electromagnetic torque and the axial levitation force. The proper controllability of the latter is crucial as it can be utilized to minimize the vertical bearing stress to improve the efficiency of the FESS. The method for controlling both the speed and axial displacement of the machine is discussed. An inherent speed sensorless observer is also proposed for speed estimation. The proposed observer eliminates the rotary encoder, which in turn reduces the overall weight and cost of the system while improving its reliability. The effectiveness of the proposed control scheme has been verified by simulations and experiments on a prototype machine.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.235-236
• /
• 2008

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1362-1363
• /
• 2011

본 논문은 250[kVA]의 용량을 갖는 Induction machine을 이용하여 FESS(Flywheel Energy Storage System)를 PSCAD/EMTDC를 통하여 전동모드(Motoring mode)와 발전 모드(Generating mode)에 관하여 시뮬레이션 한 논문이다.