• Journal of the Korean Institute of Gas
• /
• v.16 no.3
• /
• pp.16-21
• /
• 2012

In this study, the strength safety for 110 liter hydrogen fuel storage tank with 70MPa filling pressure has been analyzed using a FEM technique. The strength safety of a composite fuel tank in which is fabricated by an aluminum liner of 6061-T6 and carbon fiber wound composite layers of T800-24K and T700-12K of Toray, and MR60H-24P of Mitsubishi Ray has been investigated based on the criterion of a strength safety of US DOT-CFFC and Korean Standard. The FEM computed results on the strength safety of 70MPa hydrogen gas tank showed that the hydrogen fuel storage tank in which is fabricated by T800-24K and T700-12K of Toray, and MR60H-24P of Mitsubishi Ray is safe because those two carbon fibers have very similar material properties. But, the composite storage tank with a filling pressure of 70MPa in which is fabricated by T700-12K of Toray may not guaranty the strength safety, and thus this study recommends a composite hydrogen fuel tank under 60MPa.

• Journal of Convergence for Information Technology
• /
• v.11 no.12
• /
• pp.115-126
• /
• 2021

This study develops a simulation model that performs flood analysis considering both urban and river flood. For the analysis of river flood, this study considers river overflow by levee breach, and reflects the concept of the dual drainage systems for the analysis of urban flood. In relation to the surface flood analysis, FEM technique is applied to the flood diffusion analysis in order to conduct the flow analysis of urban and river flood simultaneously. For the verification of the model, it is first applied to the conceptual model, and then applied to the actual watershed. It is expected that this study will be able to reduce flood damage and to prepare effective countermeasures to reduce flood damage.

• Journal of the Korea Convergence Society
• /
• v.10 no.8
• /
• pp.1-7
• /
• 2019

This study focused on the usability and the difference between VR and AR technology in the FEM/CFD simulation environments. First, this paper explains the current status and prospect of the VR/AR technology and conducted a case study on the VR and AR service in the FEM/CFD simulation environments. In addition, we made the evaluation strategies for usability by a review of previous research. And then, after Interviewers participants who use of simulation at a specific site C to we investigated the usability of the VR and AR service based on the mobile device in the FEM/CFD simulation environments. The result of this study is look forward to be used as a design service to form a VR and AR service in the future.

• 한국기계연구소 소보
• /
• s.17
• /
• pp.29-38
• /
• 1987

A mechanical linkage system to measure the operating temperature of the piston is developed and installed to the engine. Actual temperature distribution is measured for comparison with the numerical results. Heat transfer at the piston is analyzed using an FEM program. Thermal boundary condition of piston surface is determined by analytical and empirical methods. The temperature distribution and the thermal deformation are obtained by the FEM program.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10a
• /
• pp.456-461
• /
• 1998

This paper presents the results from a combination of strut-and-tie model and analytical study that investigated the ultimate strength of wall system with frame supports. Strut-and-tie models show reasonable force flows and upper bound solution is compared to the results from FEM analysis. The results shows that two main parameters - transfer girder depth and column width - yield good estimation of the ultimate strength of the system. Vertical and horizontal reinforcements of the transfer girder add few strength to the whole system. The proposed design strength formula shows good agreement with the results from FEM analysis.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.221-224
• /
• 2003

In the open die forging process, it is difficult to optimize process parameters such as die shape, initial ingot size, feeding pitch, rotation angle and other process parameters in the operational environments. Therefore in this study, 3D finite element analysis has been performed to obtain optimal process condition for open die forging process. FEM analyses at various feeding pitches and rotation angles provide process conditions to make round bar having precise dimensional accuracy.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.1261-1262
• /
• 2010

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.2
• /
• pp.133-139
• /
• 2002

In this paper, the magneto-thermal analysis of an induction heating jar is presented as an efficient design. The magnetic field inside the axisymmetric shaped cooker is analyzed using an axisymmetric FEM(Finite Element Method) and the effectual heat source is obtained by calculation of the induction current in the Jar. The temperature distribution can be calculated using the heat source and heat equation.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.3-6
• /
• 2006

In this study, 3D Design and the Structural Analysis using FEM are conducted for developing the Release Devices. On these bases the prototype devices are made and the reliability has been improved through many environmental tests.

• Computational Structural Engineering
• /
• v.8 no.4
• /
• pp.17-23
• /
• 1995

Based on the present FEM study for negative Poisson's-ratio UHMWPE, the following conclusions seem expected. 1) Negative Poisson's-ratio UHMWPE transfers less stresses to the subchondral or peripheral iliac bone, compared to the conventional UHMWPE with Poission's-ratio. 2) Negative Poisson's-ratio cup reduces stresses in UHMWPE cup itself as well as metal backing, and subchondral bone. 3) The reduction in periacetabular mechanical stresses would significantly reduce the rate of fatigue failure and consequently reduce the incidence of aseptic loosening of the cup due to wear or bone resorption.