• 대한치과기공학회지
• /
• 제33권1호
• /
• pp.55-61
• /
• 2011

Purpose: In this study, FEM(Finite Element Method) and bending strength test was conducted using normal implant and porous implant for the mechanical estimation of porous dental implant made by SLM method. Methods: Mechanical characteristics of PI(porous implant) and NI(normal implant) applied distributed loads(200N, 500N) were observed through FEM analysis. And each bending strength was gotten through bending test using MTS(Mechanical Test System, Instron 8871). Results: The result of FEM analysis was observed that stress difference between upper and surface of PI was 12 times, while NI was 2 times. The result of bending test was observed that bending strength of PI was lower than NI. we made a decision about this result that cross-sectional area of NI was larger than the PI. Conclusion: The stress shielding ability of porous implant was better than normal implant through result of FEM analysis. And bending strength of porous implant was lower than NI. We think that cause of this result was difference of cross-sectional area.

• 전기학회논문지P
• /
• 제52권3호
• /
• pp.121-126
• /
• 2003

In this paper, we propose the haptic system for the real-time virtual environment-control, which controls the sense of sight, hearing and touch. In order to maintain the stable haptic system in this study, we apply the proxy force rendering algorithm and the real-time graphic deformation algorithm based on the FEM. The applied proxy algorithm makes the system possible to be more stable and prompt with a virtual object. Moreover, the haptic rendering algorithm is applied to work out a problem that the tactual transaction-period is different from the graphic transaction- period. The graphic deformation algorithm is developed in the real-time using the deformed FEM. To apply the FEM, a deformed material-model is produced and then the graphic deformation with this model is able to force. Consequently, the graphic rendering algorithm is deduced by the real-time calculation and simplification because the purpose of this system is to transact in the real time. Applying this system to the PC, we prove that it is possible to deform the graphics and transact the haptic. Finally we suggest the variable simulation program to show the efficiency of this system.

• 한국가스학회지
• /
• 제11권2호통권35호
• /
• pp.37-42
• /
• 2007

본 논문에서는 밸브몸체와 밸브스템 사이의 사각그루브에 설치한 두 개의 O-링에 대한 누설 안전성을 해석한 결과를 제시하고 있다. O-링시일의 누설 안전성에 대한 해석은 압축률과 LPG 가스압력의 변동에 따라 발생되는 누설 안전성을 유한요소해석 프로그램 MARC로 계산하였다. FEM 해석결과에 따르면, LP가스 충전압력 $8kg/cm^2$에서 안전변의 안전한 작동압력 상한치 $24.8kg/cm^2$에 이르기까지 압력하중을 압력용기 안전기준에 의거 계산한 결과는 안전한 것으로 나타났다. 다만, 두 개의 O-링의 안전성을 충분하게 확보하기 위해서는 O-링소재의 시효경화 효과를 고려하는 것이 바람직하다.

• 한국산업융합학회 논문집
• /
• 제5권4호
• /
• pp.373-378
• /
• 2002

This paper presents a method to predict tool deflection induced by the thermal distribution and the cutting force using FEM in milling operation. The thermal distribution of cutting tool was predicted using FEM after measuring the temperature of the end of tool and of the tool holder. The thermal deflection of cutting tool was predicted using FEM as well. The tool deflection induced by the cutting force was analyzed with the solid model of cutting tool. An end mill tool caused most of tool deflection comparing to tool holder. Most of thermal deflection came from Z-direction and most of tool deflection induced by the cutting force came from X and Y direction. Precision cutting will be accomplished when tool locations are generated considering the thermal deflection of cutting tool and the tool deflection induced by the cutting force in CAD/CAM.

• 대한건축학회논문집:구조계
• /
• 제35권9호
• /
• pp.159-169
• /
• 2019

This work presents the three-dimensional extended strain smoothing approach in the framework of finite element method, so-called smoothed finite element method (S-FEM) for quasi-incompressible hyperelastic materials undergoing the large deformations. The proposed method is known that the incompressible limits, such as over-estimation of stiffness and distorted mesh sensitivity, can be overcome in two dimensions. Therefore, in this paper, the idea of Cell-based, Edge-based and Node-based strain smoothing approaches is extended to three-dimensions. The construction of subcells and smoothing domains for each methods are explained. The smoothed strain-displacement matrix and the stiffness matrix are obtained on each smoothing domain in the same manner with two-dimensional S-FEM. Various numerical tests are studied to demonstrate the validity and accuracy of 3D-S-FEM. The obtained results are compared with analytical solutions to express the efficacy of the methods.

• Structural Engineering and Mechanics
• /
• 제81권3호
• /
• pp.379-394
• /
• 2022

Shallow footings usually belonged to the category of thick plate structures. For accurate analysis of thick plates, the contribution of out-of-plane components of the stress tensor should be considered in the formulation. Most of the available shallow footing models are based on the classical plate theories, which usually neglect the effects of the out-of-plane stresses. In this study, a mixed-field plate finite element model (FEM) is developed for the analysis of shallow footings rested on soil foundations. In addition to displacement field variables, the out-of-plane components of the stress tensor are also assumed as a priori unknown variables. For modeling the interaction effect of the soil under and outside of the shallow footings, the modified Vlasov theory is used. The tensionless nature of the supporting soil foundation is taken into account by adopting an incremental, iterative procedure. The equality requirement of displacements at the interface between the shallow footing and soil is fulfilled using the penalty approach. For validation of the present mixed FEM, the obtained results are compared with the results of 3D FEM and previous results published in the literature. The comparisons show the present mixed FEM is an efficient and accurate tool for solving the problems of shallow footings rested on subsoil.

• Steel and Composite Structures
• /
• 제46권4호
• /
• pp.565-575
• /
• 2023

This study represents a numerical research in vibration and buckling of functionally graded material (FGM) beam comprising edge crack by using finite element method (FEM) and multilayer perceptron (MLP). It is assumed that the material properties change only according to the exponential distributions along the beam thickness. FEM and MLP solutions of the natural frequencies and critical buckling load are obtained of the cracked FGM beam for clamped-free (C-F), hinged-hinged (H-H), and clamped-clamped (C-C) boundary conditions. Numerical results are obtained to show the effects of crack location (c/L), material properties (E₂/E₁), slenderness ratio (L/h) and end supports on the bending vibration and buckling properties of cracked FGM beam. The FEM analysis used in this paper was verified with the literature, and the fundamental frequency ratio ($\overline{P_{cr}}$) and critical buckling load ratio ($\overline{{\omega}}$) results obtained were compared with FEM and MLP. The results obtained are quite compatible with each other.

• 한국기계가공학회지
• /
• 제5권1호
• /
• pp.39-44
• /
• 2006

Ultra precision positioning mechanism has been widely used on semiconductor manufacturing equipments, optical spectrum analyzers and cell manipulations. Ultra precision positioning mechanism consists of several actuators, sensors, guides and control systems. Its efficiency depends on each performance of components. The object of this study is to design and analyze the micro stage that is one of the equipments embodied in ultra precision positioning mechanism. The micro stage consists of PZT actuators and flexure hinges. The structural design of flexure hinge is optimized by using RSM and FEM. The control factors concerned with the design of flexure hinges of stage and arms are optimized by minimizing the equivalent stress on the hinge and maximizing 1st natural frequency based on RSM and FEM simulation under various kinds of design conditions.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.49-52
• /
• 2007

Terrestrial Laser Scanning(TLS) was developed at the mid-to-late 1990s. This technique enables to perform reconnaissance surveying of regions or structures hard to access. Besides, TLS has been extended its application gradually such as preservation of historical remains, underground surveys, slopes, glaciers monitoring and so on. However, though the technique has a lot of advantages, an application for structural health and safety monitoring is a beginning stage and it need much research. Therefore in this study, as a groundwork, the estimation model on stress of structures using TLS and Finite Element Method(FEM) applied by the Digital Elevation Model(DEM) technique of geoinformatics is proposed. For the verification of this model, experiments were performed with a continuous steel beam subjected to point loads and outputs were compared with those of electrical strain sensors.

• 동력기계공학회지
• /
• 제9권2호
• /
• pp.26-32
• /
• 2005

It has been an earnest wish for engineers to convert heat loss from engine into power, but it is almost impossible in actual application. The serious problem in engine operation without cooling is that the cylinder material is sometimes melted by exceeding melting temperature. Following the first law of thermodynamics, it is possible that heat loss to cooling water can be converted into mechanical work through crankshaft. In this study, LHR(Low Heat Rejection) engine coated with zirconia and made by quartz was introduced as one of the promising engine and several useful qualitative and quantitative data were drawn.