• 한국측량학회지
• /
• 제3권2호
• /
• pp.18-31
• /
• 1985

본 연구는 FEM에 의한 3 변측양의 조정을 해석하는데 그 목적이 있으며, FEM은 대상물의 예위 및 변동의 문제를 해석하는 수치해석이다. 본 연구에서는 평면 3 각망과 평면구조물과의 형상과 해석이 비슷하기 때문에 FEM의 기법을 3변측양조정에 이용하였다. 따라서 본 연구에서는 3 변측양조정에 FEM과 조건방정식방법을 적용하여 그들의 정밀도와 특성을 고찰하였다.

• 대한설비공학회지:설비저널
• /
• 제13권2호
• /
• pp.10-15
• /
• 1984

The aims of this study are to obtain a suitable method and a proper mesh for investigation of the temperature distribution and heat transfer. The relative errors of temperature distribution and heat transfer for each mesh are acquired in accordance with linear finite element (FEM 3), square finite element (FEM 6), cubic finite element (FEM 10), and finite difference method (FDM). It has been found that FEM 10 is the most accurate measure to obtain the temperature distribution and heat transfer. However, no significant results have been obtained successfully, because when higher order finite element methods are used the more computational efforts are necessary due to the distribution of elements. The results of this study are as follows ; 1 . In case of a=b=L, meshes for less than $1\%$ relative errors (temperature distribution) acquired in various methods to exact solution are $2\times2,\;4\times4,\;8\times8\;and\;8\tiems8$ for each FEM 10, FEM 6, FEM 3 and FDM and a=L, b=1/2L are $10\times5$ for each FEM 3 and FDM. And the tendency of results acquired of heat transfer is similar to those above. 2 . In computational efforts (a=b=L), FEM 6 has taken 21 times. and FEM 10 154times FEM 3 and FDM and FEM 3 is the sane as FDM.

• 대한전기학회논문지
• /
• 제34권7호
• /
• pp.276-282
• /
• 1985

This study is concerned with the analysis of two-dimensional steady magnetic fields by the coupling of FEM and BEM. FEM(Finite Element Method)is most widely used as a method of numerical analysis and BEM (Boundary Element Method)is a newest method for it. And the results from this coupling method are compared and discussed with those of FEM only. Consequently, it is shown that to obtain the same accuracy of results the coupling method requires less calculating time and dimension than the FEM.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.189-192
• /
• 2006

본 논문에서는 안테나와 미국 PCS대역(1.85GHz-1.99GHz) FEM(Front End Module)을 결합하여 하나의 패키지로 구현하는 것을 연구하였다. FEM의 크기를 고려하여 안테나의 크기를 작게 만들고 단말기에 내장하기 위해 PIFA(Planar Inverted F Antenna)형식의 안테나를 선택하였다. 안테나의 지지를 위해 비유전율 2의 캐리어를 사용하였고, 안테나와 FEM간의 상호 간섭을 막기 위해 도체로 차폐시켰다. 유한요소법(Finite Element Method)로 모의 실험을 하여 안테나를 설계하고 실제 제작하여 모의 실험결과와 비교하였다. 제작한 안테나를 FEM과 결합, 기판을 제작하여 FEM의 이득을 측정하였다.

• 한국지반신소재학회논문집
• /
• 제8권1호
• /
• pp.11-18
• /
• 2009

본 논문에서는 보강토사면 안정해석에 있어서 한계 평형법과 강도감소법에 의한 유한요소법의 비교분석결과를 나타내었다. 현재 보강토 옹벽 해석에 적용하는 방법은 한계평형해석법이다. 강도감소법에 의한 유한요소법은 연속체 역학 기반을 두고, 흙의 강도정수를 안전율로 나누어 감소시켜, 수렴되지 않는 시점을 사면의 파괴로 간주하는 방법이다. 본 연구에서는 보강토옹벽사면의 안전율과 파괴활동면에 대하여 비교검토를 하였다. $60^{\circ}$ 보강토 사면에 대하여 LEM과 SSR-FEM 방법에 의한 안정성해석결과에 대하여 비교검토하였다. 두 해석에 의한 비교 검토결과 보강토 옹벽의 안정성 해석에 대하여 SSR-FEM의 유효성이 조사되었다.

• Structural Engineering and Mechanics
• /
• 제39권6호
• /
• pp.767-793
• /
• 2011

An efficient edge-based smoothed finite element method (ES-FEM) has been recently developed for solving solid mechanics problems. The ES-FEM uses triangular elements that can be generated easily for complicated domains. In this paper, the complexity study of the ES-FEM based on triangular elements is conducted in detail, which confirms the ES-FEM produces higher computational efficiency compared to the FEM. Therefore, the ES-FEM offers an excellent platform for adaptive analysis, and this paper presents an efficient adaptive procedure based on the ES-FEM. A smoothing domain based energy (SDE) error estimate is first devised making use of the features of the ES-FEM. The present error estimate differs from the conventional approaches and evaluates error based on smoothing domains used in the ES-FEM. A local refinement technique based on the Delaunay algorithm is then implemented to achieve high efficiency in the mesh refinement. In this refinement technique, each node is assigned a scaling factor to control the local nodal density, and refinement of the neighborhood of a node is accomplished simply by adjusting its scaling factor. Intensive numerical studies, including an actual engineering problem of an automobile part, show that the proposed adaptive procedure is effective and efficient in producing solutions of desired accuracy.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권2호
• /
• pp.60-65
• /
• 2005

This study tries to analyzes the static friction torque that generated in a micro-electromagnetic clutch by using FEM. For the purpose of design change and optimization of the micro-electromagnetic clutch, the static friction torque prediction is very important. We construct the axi symmetric FEM model for analyze the static friction torque and the real material properties are substituted to the FEM model. For a test, predicted static friction torque is compared with experimental one to discuss the rationality of torque analysis process. The analytical result agrees well to experimental data. explaining the validity of the mathematical process and FEM model.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.55-56
• /
• 2015

This study is corroborated as a fundamental resource to develop structural lightweight paste containing silica fume as a part of cement. Paste using foaming agent is generated much foam and decreased density of paste. This study is measured at 0.8% of foaming agent dosage but over 0.8% of foaming agent dosage raise density of paste because of interconnection with foam. Also, FEM analysis using SEM image is confirmed correspondence of between Elastic modulus of experiment and FEM analysis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.9-10
• /
• 2010

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.363-368
• /
• 2004

Maglev vehicles, which are levitated and propelled by electromagnets, often run on elevated guideways comprised of steel, aluminum and concrete. Therefore, an analysis of the dynamic interaction between the Maglev vehicle and the guideway is needed in the design of the critical speed, ride, controller design and weight reduction of the guideway. This study introduces a dynamic interaction simulation technique that applies FEM. The proposed method uses FEM to model the elevated guideway and the Maglev vehicle, which is different from conventional studies. Because the proposed method uses FEM, it is useful to calculate the deformation of the elevated guideway, the dynamic stress, and the motion of the vehicle. By applying the proposed method to an urban transit Maglev vehicle, UTM01, the dynamic response is simulated according to velocity increase and can be reviewed again. From the result of the study, we concluded that FEM simulation of the dynamic interaction between the maglev vehicle and the guideway is possible.