• Corrosion Science and Technology
• /
• 제22권1호
• /
• pp.44-54
• /
• 2023

The rupture disk corrosion test (RDCT) method was recently developed to evaluate stress corrosion cracking (SCC) and was found to have great potential for the real-time detection of SCC initiation in a high temperature and pressure environment, simulating the primary water coolant of pressurized water reactors. However, it is difficult to directly measure the stress applied to a disk specimen, which is an essential factor in SCC initiation. In this work, finite element analysis (FEA) was performed using ABAQUS^TM to calculate the stress and deformation of a disk specimen. To determine the best mesh design for a thin disk specimen, hexahedron, hex-dominated, and tetrahedron models were used in FEA. All models revealed similar dome-shaped deformation behavior of the disk specimen. However, there was a considerable difference in stress distribution in the disk specimens. In the hex-dominated model, the applied stress was calculated to be the maximum at the dome center, whereas the stress was calculated to be the maximum at the dome edge in the hexahedron and tetrahedron models. From a comparison of the FEA results with deformation behavior and SCC location on the disk specimen after RDCT, the most proper FE model was found to be the tetrahedron model.

• 한국결정성장학회지
• /
• 제7권2호
• /
• pp.334-340
• /
• 1997

불순물 주입에 의한 $SrTiO_3$ 박막의 전기적 특성 개선에 관하여 연구하였다. 잉여 SrO가 첨가되고 Fe, Cr 이온이 불순물 도핑된 박막은 $550^{\circ}C$, $Ar/O_2$비를 변화시키면서 형성되었다. 어셉터 이온 도핑에 의한 누설전류 특성이 개선됨을 알 수 있었다. 5 mol% SrO가 첨가되고, $550^{\circ}C$, $Ar/O_2$비가 5 : 5에서 형성된 $SrTiO_3$ 박막의 유전상수 값은 320, 누설전류 밀도는 $1.0 {\times} 1.0 A/\textrm{cm}^2$까지 개선될 수 있었다. 이러한 결과는 고유전 박막의 전기적 특성을 향상시킴으로써 차세대 메모리 유전체 물질 개발에 응용될 수 있을 것으로 기대한다.

• 대한치과보철학회지
• /
• 제45권1호
• /
• pp.119-130
• /
• 2007

Statement of problem: A few dry lubricants were applied to abutment screws for the improvement of joint stability. Purpose: The purpose of this study was to evaluate the surface change and fit of TiN-Coated abutment screw through the examination of tested screws in the field emission scanning electron microscope(FE-SEM;Netherland, Phillips co., model:XL 30 SFEG) after repeated closing and opening. Materials and method: Titanium(3i/implant Innovations Inc, USA) and Gold-Tite abutment screws(3i/implant Innovations Inc, USA) were selected for Group A and C respectively. TiN coated titanium abutment screws were also divided into two groups, Group B and D. Abutment screws of each group and the fit of abutment screw/implant fixture/abutment were observed on FE-SEM after repeated closing and opening test respectively. Results: 1. The abutment screws of TiN coated groups(Group B and D) showed more remarkable wear resistance in the threads of the screw than those of the other group(Group A and C). 2. There were more severe wear and defect of TiN coating in Group D tightened to 32 Ncm than Group B to 20 Ncm. 3. There was no difference in the fit of abutment screw/fixture/abutment among four groups, Group A, Group B, Group C and Group D. Conclusion: Under the conditions of this study, it is suggested that TiN coating of abutment screw be clinically acceptable and be expected to reduce the risk of abutment screw loosening. TiN coating of abutment screw showed good resistance against wear and the adequate fit of abutment screw/implant fixture/abutment.

• 한국자기학회지
• /
• 제18권3호
• /
• pp.89-93
• /
• 2008

준강자성체 구리-철-크롬 산화물 $CuFe_{0.9}Cr_{1.1}O_4$을 제조하여 액체질소 온도에서부터 닐 온도까지의 범위에 대한 뫼스바우어 분광실험을 하였다. 닐 온도는 355 K로 측정되었으며, 닐 온도 이상에서의 전기사중극자 상호작용의 크기인 사중극자 분열값은 0.50 mm/s인 반면, 닐 온도 이하에서의 사중극자 이동값은 실험오차 범위 내에서 0.00 mm/s이었다. 이러한 전기사중극자 상호작용에 대한 겉보기 불일치 현상은 자기적 초미세 자기장이 전기장 기울기 텐서의 주축에 대하여 무작위로 배열된다는 모델을 이용하면 설명될 수 있다.

• Journal of Nutrition and Health
• /
• 제32권8호
• /
• pp.855-863
• /
• 1999

This study was performed to investigate the effect of dietary protein level throughout gestation and lactation on milk composition and on postnatal growth in infants, using rats as an animal model. Female Sprague-Dawley rats were provided with either high(25% ISP(Isolated Soy Protein)diet) or low protein diet(10% ISP diet) throughout gestation and lactation. Milk samples were taken for analysis from the lactating rats at days of 7, 14, 21, of lactation. Dams and some pups were killed after 4 weeks from parturtion (Experiment 1). Pups from dams of each diet groups were randomly selected and reared with 25% or 10% ISP diet for 4 more weeks (Experiment 2). In experiment 1, maternal protein intake and body weight gain throughout gestation and lactation was higher in 25% ISP group. Serum protein, Ca, Fe, Zn, K concentrations were significantly higher in 25% ISP group. There was no difference in birth weight between two groups, however the mean body weight at 4 weeks postpartum were significantly higher in 25% ISP group. Serum profiles of pups at weaning were similar to that of dams. Milk compositions were changed during lactation processes and were affected by dietary protein level. Lactose and Ca, Cu, Fe concentrations in milk were higher in 25% ISP group, whereas, lipid, triglyceride were higher in 10% ISP group. In experiment 2, food intake was higher in milk were higher in 25% ISP group but was unaffected by pup's dietary protein level after weaning. The weights of liver and kidney were affected by maternal protein intake. The weight of intestine was affected by pup's dietary protein level after weaning. The weight of femur and scapula were affected by maternal protein intake. There were no differences between four groups in serum profiles. Therefore, as mentioned above, it seemed that the effect of maternal protein malnutrition to fetus was able to be overcome to some extent by high protein diet intake after weaning. In conclusion, 1) Dietary protein level throughout gestation and lactation affected both nutritional status of dams and pups and milk composition: 25% ISP groups supported better nutritional status than 10% ISP group 2) It seemed that effect of dietary protein level after weaning on pups was able to be overcome the influence of maternal diet in fetus to some extent.

• Advances in nano research
• /
• 제12권5호
• /
• pp.457-465
• /
• 2022

The potentials of Ni_xZn_1-xFe₂O₄ (x = 0.0, 0.2, 0.4, 0.6, 0.8 and 1.0) nanoadsorbents were investigated for removal of Cd and Cr from contaminated water from an electroplating industry in Himachal Pradesh, India. Optimal values were recorded under batch adsorption experiments performed to remove dissolved heavy metal ions from industrial wastewater. The specific surface area (SSA) of nanoadsorbents perceived to vary in a range 35.75-45.29 cm²/g and was calculated from the XRD data. The influence of two operating parameters, contact time and dopant (Ni) concentration was also investigated at pH ~7 with optimum dosage. Kinetic studies were conducted within a time range of 2-10 min with rapid adsorption of cadmium and chromium ions onto Ni_0.2Zn_0.8Fe₂O₄ nanoadsorbents. Pseudo-second-order kinetic model was observed to be well fitted with the adsorption data that confirmed the only existence of chemisorption throughout the adsorption process. The maximum adsorption efficiency values observed for Cd and Cr were 51.4 mg/g and 40.12 mg/g, respectively for different compositions of prepared series of nanoadsorbents. The removal percentage of Cd and Cr was found to vary in a range of 47.7%-95.25% and 21%-50% respectively. The prepared series of nanoferrite found to be suitable enough for adsorption of both heavy metal ions.

• Computers and Concrete
• /
• 제30권4호
• /
• pp.277-287
• /
• 2022

Due to the scarcity of extortionate experimental data, fatigue failure of the reinforced concrete (RC) element might be achieved economically adopting nonlinear finite element (FE) analysis as an alternative approach. However, conventional implicit dynamic analysis is expensive, quasi-static method overlooks interaction effects and inertia, direct cyclic analysis computes stabilized responses. Apart from this, explicit dynamic analysis may provide a numerical operating system for factual long-term responses. The study explores the fatigue behavior based on a simplified explicit dynamic solution employing nonlinear time domain analysis. Among fourteen RC beams, one beam is selected to validate under static loading, one under fatigue with the experimental study and other twelve to check the detail fatigue behavior. The SWOT (Strength, Weakness, Opportunities, Threats) analysis has been carried out to pinpoint the detail scenario in the adoption of numerical approach as an alternative to the experimental study. Excellent agreement of FE and experimental results is seen. The 3D nonlinear RC beam model at service fatigue limits is truthful to be used as an expedient contrivance to envisage the precise fatigue behavior. The simplified analysis approach for RC beam under fatigue offers savings in computation to predict responses providing acceptable accuracy rather than the complicated laboratory investigation. At higher frequency, the flexural failure occurs a bit earlier gradually compared to the repeated loading case of lower frequency. The deflection increases by 6%-10% at the end of first cycle for beams with increasing frequency of cyclic loading. However, at the end of fatigue loading, greater deflection occur earlier for higher load range because of more rapid stiffness degradation. For higher frequency, a slight boost in concrete compressive strains at an initial stage of loading has been seen indicating somewhat stepper increment. Stiffness degradation in larger loading cycle at same duration escalates the upsurge of the rate of strain in case of higher frequency.

• 환경영향평가
• /
• 제29권4호
• /
• pp.272-285
• /
• 2020

본 연구에서는 3차원 기상 및 대기질 모델의 입출력 자료를 평가하는 데 필요한 통계 검증지표를 선별하고, 선정된 검증지표의 기준치를 조사하여 그 결과를 요약하였다. 여러 국내외 문헌과 최근 논문 검토를 통해 최종 선정된 통계 검증지표는 MB (Mean Bias), ME (Mean Error), MNB (Mean Normalized Bias Error), MNE (Mean Absolute Gross Error), RMSE (Root Mean Square Error), IOA (Index of Agreement), R (Correlation Coefficient), FE (Fractional Error), FB (Fractional Bias)로 총 9가지이며, 국내외 문헌을 통해 그 기준치를 확인하였다. 그 결과, 기상모델의 경우 대부분 MB와 ME가 주요 지표로 사용되어 왔고, 대기질 모델 결과는 NMB와 NME 지표가 주로 사용되었으며, 그 기준치의 차이를 분석하였다. 아울러 이들 통계 검증지표값을 이용하여 모델 예측 결과를 효과적으로 비교하기 위한 표출 도식으로 축구 도식, 테일러 도식, Q-Q (Quantile-Quantile) 도식의 장단점을 분석하였다. 나아가 본 연구 결과를 기반으로 우리나라의 산악지역의 특수성 등이 잘 고려된 통계 검증지표의 기준치 설정 등의 추가연구가 효과적으로 진행될 수 있기를 기대한다.

• Structural Engineering and Mechanics
• /
• 제75권4호
• /
• pp.507-518
• /
• 2020

With the rapid development of rail transit, rail transit noise needs to be paid more and more attention. In order to accurately and effectively analyze the characteristics of low-frequency noise, a prediction model of vibration of box girder was established based on the hybrid FE-SEA method. When the train speed is 140 km/h, 200 km/h and 250 km/h, the vibration and noise of the box girder induced by the vertical wheel-rail interaction in the frequency range of 20-500 Hz are analyzed. Detailed analysis of the energy level, sound pressure contribution, modal analysis and vibration loss power of each slab at the operating speed of 140 km /h. The results show that: (1) When the train runs at a speed of 140km/h, the roof contributes more to the sound pressure at the far sound field point. Analyzing the frequency range from 20 to 500 Hz: The top plate plays a very important role in controlling sound pressure, contributing up to 70% of the sound pressure at peak frequencies. (2) When the train is traveling at various speeds, the maximum amplitude of structural vibration and noise generated by the viaduct occurs at 50 Hz. The vibration acceleration of the box beam at the far field point and near field point is mainly concentrated in the frequency range of 31.5-100 Hz, which is consistent with the dominant frequency band of wheel-rail force. Therefore, the main frequency of reducing the vibration and noise of the box beam is 31.5-100 Hz. (3) The vibration energy level and sound pressure level of the box bridge at different speeds are basically the same. The laws of vibration energy and sound pressure follow the rules below: web

• 공업화학
• /
• 제8권6호
• /
• pp.954-959
• /
• 1997

$Sr_{1-X}M_XFeO_{3-y}$ 계에서 (M=Ca), x=0.1, 0.2, 0.3, 0.4, 0.5에 대응하는 페로브스카이드계 고용체를 공기중, 1473K에 18시간 동안 열처리하여 합성하였다. X-선회절분석 결과 모든 고용체는 단순 입방정계를 나타내며, x=0.3까지는 x값의 증가에 따라 단위세포의 부피가 감소하고, x=0.4 이후에는 급격히 증가한다. 모어염 분석에 의하여 각각의 조성에 대한 $Fe^{4-}$ 이온의 몰비($\tau$값), 산소공위의 양(y값) 및 비화학양론적 화학식을 결정하였다. TG/DTA 실험(온도범위:300~1173K) 결과 x=0.1, 0.2인 시료는 3-y값이 감소하며, 냉각시 3-y값이 거의 가역적인 증가 경향을 보였다. $x{\geq}0.3$인 시료는 가역적인 무게의 변화를 보이지 않았으며, 냉각과정에서 3-y값은 거의 2.5를 유지하였다. 상대적으로 낮은 온도범위에서 모든 시료의 전기전도도 값은 반도성 범위에서 변화하였다. 그리고 일정한 온도에서의 전도도는 x값의 증가에 따라 감소하였다. 본 훼라이트 계의 전도도 메카니즘은 혼합원자가 상태 사이의 전도성 전자의 건너뜀 모형으로 제안할 수 있을 것이다. 고온에서 각 시료의 전도성은 금속성으로 변화하였다.