• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.37
• /
• pp.8.1-8.6
• /
• 2015

Background: This study aimed to evaluate the clinical usefulness of autogenous fresh demineralized tooth (auto-FDT) graft prepared at the chairside for alveolar bone grafting during dental implant surgery. Methods: In total, 38 patients requiring both tooth extraction (for endodontic or periodontal reasons or third molar extraction) and alveolar bone regeneration for dental implant placement were included. Within 2 h after clean extraction, the teeth were prepared at the chairside to serve as bone graft material. In the same sitting, blocks or chips of this graft material were used to reconstruct defects at the osteotomy site simultaneously with or before implant placement. Twelve months after prosthesis fabrication and placement, the clinical findings and implant success rates were evaluated. Histological studies were randomly conducted for selected cases. Results: Clinical evaluation showed favorable wound healing with minimal complications and good bone support for the implants. No implant was lost after 12 months of function following prosthetic rehabilitation. Histological examination revealed new bone formation induced by the graft material. Conclusions: Chairside preparation of autogenous fresh demineralized teeth after extraction can be a useful alternative to the use of autogenous bone or other graft materials for the immediate reconstruction of alveolar bone defects to facilitate subsequent implant placement.

• Journal of Power Electronics
• /
• v.18 no.3
• /
• pp.694-701
• /
• 2018

This paper proposes a new single-phase power converter topology for changing the frequency of AC voltage. The proposed single-phase frequency converter (SFC) includes a T-type multi-level power converter (TMPC), a frequency decoupling transformer (FDT) and a digital signal processor (DSP). The TMPC can convert a 60 Hz AC voltage to a DC voltage and then convert the DC voltage to a 50 Hz AC voltage. Therefore, the output currents of the two T-type power switch arms have 50 Hz and 60 Hz components. The FDT is used to decouple the 50 Hz and 60 Hz components. The salient feature of the proposed SFC is that only one power electronic converter stage is used since the functions of the AC-DC and DC-AC power conversions are integrated into the TMPC. Therefore, the proposed SFC can simplify both the power circuit and the control circuit. In order to verify the functions of the proposed SFC, a hardware prototype is established. Experimental results verify that the performance of the proposed SFC is as expected.

• Journal of Korean Society of Rural Planning
• /
• v.23 no.3
• /
• pp.21-36
• /
• 2017

Climate change is intensifying storms and floods around the world. Where nature has been destroyed by development, communities are at risk from these intensified climate patterns. This study was to suggest a methodology for estimating flood vulnerability using Potential Flood Damage(PFD) concept and classify city/county about Potential Flood Damage(PFD) using various typology techniques. To evaluate the PFD at a spatial resolutions of city/county units, the 20 representative evaluation indexing factors were carefully selected for the three categories such as damage target(FDT), damage potential(FDP) and prevention ability(FPA). The three flood vulnerability indices of FDT, FDP and FPA were applied for the 167 cities and counties in Korea for the pattern classification of potential flood damage. Potential Flood Damage(PFD) was classified by using grouping analysis, decision tree analysis, and cluster analysis, and characteristics of each type were analyzed. It is expected that the suggested PFD can be utilized as the useful flood vulnerability index for more rational and practical risk management plans against flood damage.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.249-252
• /
• 2005

Recently, as the industrial demand for small quantity batch production of sheet metal components, the application of dieless forming technology to production of these component rise with the advantages of the reduction in manufacturing cost and time. In dieless forming processes, the determination of moving path of tool plays an important role in producing successfully formed parts. In order to obtain the optimized moving path of tool avoiding forming failure, it is necessary to examine the forming limit of sheet material. Therefore, in this study, as the new criterion to evaluate the formability of sheet material in dieless forming processes FDD(feeding depth diagram) with respect to feeding depth and punch diameter is proposed. Thus, the FDD for the sheet materials of STS304 and Ti-grade2 were obtained from a series of FDT(feeding depth test). In addition the possibility of the application of FLD in judging forming severity in dieless forming processes was investigated by comparing the results of FE analyses based on FLD and experimental FDT.

• Journal of The Korean Ophthalmological Society
• /
• v.58 no.3
• /
• pp.321-326
• /
• 2017

Purpose To identify the correspondence between the central sensitivity of several visual field (VF) tests and ganglion cell inner plexiform layer (GC-IPL) thickness in early glaucoma patients with parafoveal scotoma. Methods Fifty-seven eyes from 57 patients with glaucomatous optic neuropathy and parafoveal scotoma were analyzed using the standard automated perimetry (SAP) C10-2 test, the SAP C24-2 test, and the frequency doubling technology perimetry (FDT) C24-2 test. The correlation between the VF central sensitivity and the GC-IPL thickness from macular scans via optical coherence tomography was analyzed. Results The central sensitivity was $27.51{\pm}5.43dB$, $27.39{\pm}5.05dB$, and $22.09{\pm}5.08dB$ for SAP C24-2, SAP C10-2, and FDT C24-2, respectively. Mean GC-IPL thickness was $70.2{\pm}8.5{\mu}m$. Using regression analysis, the value of log $R^2$ between the logarithmic central sensitivity and GC-IPL thickness was 0.498, and the linear $R^2$ between the antilogarithmic central sensitivity and GC-IPL thickness in SAP C10-2 was 0.486, and both were statistically significant (p < 0.05). This relationship was stronger in early glaucoma patients compared to late glaucoma patients using SAP C10-2. Conclusions The structure-function relationship between GC-IPL thickness and central sensitivity was better with SAP C10-2, especially in early glaucoma patients, compared to other VF modalities.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1209-1216
• /
• 2010

It has increased that peripheral disturbance(blood flow, nerve, Raynaud's phenomenon) and finger rheumatoid arthritis which is caused by the diabetic complications. To improve these pain issues, we proposed new method for the Finger Disease Therapy(FDT). In this paper, we manufactured solenoid cylindrical coil which was only for the FDT using a variable micro-electromagnetic. Also, we designed the Finger Disease Therapy System(FDTS) which could select three stimulation modes(N_pulse, S_pulse, N/S_pulse) and frequency(0.25hz, 0.5hz, 1hz). We used a Teslameter to measure magnetic flux inner solenoid, and measured magnetic flux as distance(0 ~ 3cm) inner solenoid with stimulation modes and frequency. In the results, magnetic flux was the highest in center of solenoid(0cm) for all stimulation modes. Also, the highest magnetic flux was measured as N_pulse(294.3mT), S_pulse(293.8mT) in 1Hz and N/S_pulse (275.4mT) in 0.25Hz, respectively. Therefore, we developed the FDTS using various pattern and intensity for finger diseases therapy, and checked therapy clinic application possibility of the FDTS as measuring magnetic flux inner solenoid.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.1415-1418
• /
• 2010

• ETRI Journal
• /
• v.9 no.3
• /
• pp.22-32
• /
• 1987

본고는 FDT(Formal Description Technique)에 속하는, 통신 프로토콜의 규격기술에 사용되는 기법언어인 ESTELLE 언어를 대상으로 이를 5-PASCAL로 전환해주는 preprocessor의 설계 및 구현에 대한 연구결과이다. ESTELLE의 특성은 상태전이 처리 측면에 concurrent 개념을 지니고 있다. 가장 최적화된 방법으로는concurrent 개념을 모두 수용해주는 H/W와 S/W환경이 구비된 조건에서 concurrent 언어로 전환하는 것이 타당하나 본 고에서는 ESTELLE 언어와 구성상 유사한 PASCAL 중 sequential PASCAL을 target 언어로 하였다.

• Journal of Korea Multimedia Society
• /
• v.16 no.7
• /
• pp.810-819
• /
• 2013

FCM (Fuzzy C-Means) clustering algorithm, a typical split-based clustering algorithm, has been successfully applied to the various fields. Nonetheless, the FCM clustering algorithm has some problems, such as high sensitivity to noise and local data, the different clustering result from the intuitive grasp, and the setting of initial round and the number of clusters. To address these problems, in this paper, we determine fuzzy numbers which project the FCM clustering result on the axis with the specific attribute. And we propose a model that the fuzzy numbers apply to FDT (Fuzzy Decision Tree). This model improves the two problems of FCM clustering algorithm such as elevated sensitivity to data, and the difference of the clustering result from the intuitional decision. And also, this paper compares the effect of the proposed model and the result of FCM clustering algorithm through the experiment using real traffic and rainfall data. The experimental results indicate that the proposed model provides more reliable results by the sensitivity relief for data. And we can see that it has improved on the concordance of FCM clustering result with the intuitive expectation.

• The Journal of the Korea Contents Association
• /
• v.8 no.8
• /
• pp.47-56
• /
• 2008

MC(Mission Computer) performs important function in avionics system which tactic data processing, image processing and managing navigation system etc. In general, the fault of SPOF(Single Point Of Failure) in unity system can lead to failure of whole system. It can cause a failure of a mission and also can threaten to the life of the pilot. So, in this paper, we design the HA(Hight-availability) system so that dealing with the failure. And we use HA software like Heartbeat, Fake, DRBD and Bonding to manage HA system. Also we analyze the performance of HA system using the FDT(Fault Detection Time) for fast fault detection and MTTR(Mean Time To Repair) for mission continuity.