• Journal of Korea Society of Digital Industry and Information Management
• /
• v.4 no.2
• /
• pp.93-100
• /
• 2008

After free trade, it is increasing to import crops, aquatic products, and livestock which are produce in a foreign land. But it is affect negatively to trust relationships and markets of Jeju's foods because of breaking it out that foreign productions exchange domestic. Therefore, this paper designed and implemented the Genuine Quotation system of Black pigs using UHF RFID. This system is developed for distinguishing spuriousness, then searching information of the product through EPC ONS in EPCIS to print within a screen. Moreover, this intuitional and efficient system is constructed by connecting various sensors and lights. It can be contributed income increase thorough the security for the quality authority of the agricultural & stockbreeding products with FCS, FCG Certificate and the genuine certificate of the black pig which is the one of most typical agricultural & stockbreeding products in the pure Green Province, Jeju.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.329-333
• /
• 2005

In this study paper, a 3[kW] Fuel Cell Generation (FCG)system with Fuel Cell(FC)simulator has been proposed. The developed FC simulator generates the actual voltage and current output characteristics of the Proton Exchange Membrane Fuel Cell (PEMFC), so that the overall performance and the dynamics of the proposed system could be effectively examined and tested. In this paper, at first, the system configuration and operational principle of the developed FC simulator has been investigated and the design process of the FCG system is explained in detail. In addition, the validity of the proposed system has been verified by the informative simulation and experimental results.

• Macromolecular Research
• /
• v.9 no.6
• /
• pp.319-326
• /
• 2001

Fatigue crack growth (FCG) behavior of natural rubber/ethylene-propylene-diene rubber (NR/EPDM) blend vulcanizates under dynamic tearing condition was investigated by using a fracture mechanics approach. It appeared that variation of crack growth rate with blend compositions was dependent on the level of imposed tearing energy G. At low tearing energy region, the FCG rates of the blend were lower as the EPDM content was increased, while at high tearing energy region, the trend was reversed. Over the measured range of tearing energy G, all blend compositions showed the lower crack growth rates compared to the average of properties of component elastomers. When the blends were thermally aged, the fatigue resistance of the blends was deteriorated in proportion to the concentration of EPDM phase. Fatigue crack growth behavior of the blends was supposed to be associated with the inhomogeneities of the crosslink structure of the blends arising from cure incompatibility of the EPDM and NR when they are sulphur cured.

• Nuclear Engineering and Technology
• /
• v.56 no.5
• /
• pp.1887-1894
• /
• 2024

Fatigue strength of the structural materials of lead-cooled fast reactors (LFRs) and accelerator-driven systems (ADS) may be degraded in liquid metal (Lead or lead-bismuth eutectic (LBE)) environments. The fatigue crack growth (FCG) data of structural materials in liquid LBE are necessary for damage tolerance design, safety assessment and life management of key equipment. A novel monitoring system for fatigue crack length was designed on the compliance method and the monitor technology of crack opening displacement (COD) of CT specimens by the linear variable differential transformers (LVDT) system. It can be used to predict the crack length by monitoring the COD of CT specimens in harsh high-temperature liquid LBE using a LVDT system. The prediction accuracy of this system was verified by FCG experiments in room temperature air and liquid LBE at 150, 250 and 350 ℃. The first results obtained in the FCG test for T91 steel in liquid LBE at 350 ℃ are presented.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.5
• /
• pp.450-457
• /
• 2004

In this research, the automatic synthesis of knowledge models is proposed. which are the basis of the methods using qualitative models adapted widely in fault diagnosis and hazard evaluation of chemical processes. To provide an easy and fast way to construct accurate causal model of the target process, the Role-Behavior modeling method is developed to represent the knowledge of modularized process units. In this modeling method, Fault-Behavior model and Structure-Role model present the relationship of the internal behaviors and faults in the process units and the relationship between process units respectively. Through the multiple modeling techniques, the knowledge is separated into what is independent of process and dependent on process to provide the extensibility and portability in model building, and possibility in the automatic synthesis. By taking advantage of the Role-Behavior Model, an algorithm is proposed to synthesize the plant-wide causal model, Fault-Causality Graph (FCG) from specific Fault-Behavior models of the each unit process, which are derived from generic Fault-Behavior models and Structure-Role model. To validate the proposed modeling method and algorithm, a system for building FCG model is developed on G2, an expert system development tool. Case study such as CSTR with recycle using the developed system showed that the proposed method and algorithm were remarkably effective in synthesizing the causal knowledge models for diagnosis of chemical processes.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.1
• /
• pp.37-42
• /
• 2013

The presence of a crack can increase the local stress or strain, which can cause inelastic deformation and significantly reduce the life of a component or structure. Therefore, in this study, the fatigue crack growth (FCG) behaviors of friction stir welded Al 2024-T3 and Al 7075-T6 specimens were examined, with fatigue cracks growing parallel to the dynamically recrystallized zone at variable ${\Delta}K$ values and an R ratio of 0.3. In addition, the FCG values of the base metal Al 2024-T3 and Al 7075-T6 were tested under the same conditions and parameters as comparative groups. The results showed that compared with the base metal Al 2024 specimen, which had the best fatigue property, the welded specimen had only 88% of the fatigue cycles.

• Proceedings of the Korean Society for Cognitive Science Conference
• /
• 2000.06a
• /
• pp.383-389
• /
• 2000

본고는 한영번역기 개발을 위한 기초 작업으로 '와/과'구문에 나타나는 여러 가지 패턴을 정리하고 이들 구문에서 보이는 중의성 문제를 해결하고자 하였다. 이러한 작업을 위해서는 자료 수집 및 분석이 우선이기 때문에 코퍼스에서 '와/과'구문을 뽑아서 분석하여 규칙을 마련하였다. 여기에서 사용된 자질연산문법(FCG)은 자연언어처리를 위한 문법으로 변형규칙과 수형도의 개념 없이 자질을 이용한 연산 체계로서 언어처리를 하고자 하는 문법이다. 이 이론을 바탕으로 규칙을 세우고 실제 언어 자료를 뽑아서 테스트를 하여 95%의 성공률을 보여주었다. 그러나 여기서의 연구는 '와/과'구문의 처리를 위한 가장 뼈대가 되는 기초연구이며, 앞으로 좀 더 많은 처리가 이루어져야 하리라 생각된다.

• The Journal of the Korea Contents Association
• /
• v.8 no.3
• /
• pp.32-40
• /
• 2008

After Freer trade, it is increasing to import crops, aquatic products, and livestock which are produce in a foreign land. But it is affect negatively to trust relationships and markets of Jeju's goods because of breaking it out that foreign productions exchange domestic. We need to traceability system. Therefore, this paper designed and implemented the traceability system of black pigs using RFID. To enhance more the Jeju's fresh image, this proposed system is designed to manage all process which are breeding, butchery, industrial processes, and traceability of black pigs, a local speciality, using RFID tags. also the user can provide the traceability system which is using webs anywhen and anywhere. The results is to provide farm's income rise and to make for steady supply and guarantee the quality of Jeju's goods with FCS, FCG, HACCP quotation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.6
• /
• pp.633-640
• /
• 2011

In this study, the stabilization of an edge flame and the intensity variation of a diffusion branch were investigated using a multi-slot combustor under conditions of high temperature and small fuel-concentration gradient (FCG). The combustor consists of three narrow channels: a quartz channel and two side-heating combustors. For the accuracy of this experimental study, quantitative analysis was carried out for each boundary condition. Stable edge flames could be observed under high-temperature conditions by controlling the FCG and fuel dilution ratio. Moreover, it was found that the intensity of the diffusion flame was increased by increasing the temperature of the mixture. On the contrary, the intensity of the diffusion flame was decreased by increasing the dilution ratio. It was also found that a propane flame is more sensitively affected by these experimental parameters than a methane flame.

• The Korean Journal of Food And Nutrition
• /
• v.21 no.2
• /
• pp.210-217
• /
• 2008

This study evaluated the hypolipidemic effects of Eleutherococcus senticosus combined with several oriental medicinal herbs. In addition, it addressed whether consuming a diet of healthy food along with a daily supplement of this composite could affect the health status of individuals suffering from diet-related disease such as obesity and hyperlipidemia. The effects of the combined medicinal herbal extracts(MHE) extracted with hot water on reducing serum lipids and improving blood parameters were examined in rats fed a high-fat diet for 5 weeks. Sprague-Dawley rats were randomly assigned to 4 groups: basal diet only(BDG), high fat diet without MHE(FCG), high fat diet and 10% MHE(F10E) and high fat diet and 20% MHE(F20E). Serum lipid contents and blood variables were examined after the experimental period. The results of were as follows. The hematological data for the 4 groups were similar indicating no significant differences. There were moderate level of serum GOT activity in the F10E and F20E groups as compared to the FCG group. Total cholesterol, LDL-cholesterol, triglyceride in serum and the atherogenic index were remarkably reduced in the MHE-supplemented groups as compared to the control group. However, F10E and F20E groups had significantly higher HDL-cholesterol levels than the control group. These results imply that combination of several medicinal herbal extracts could be used to reduce of serum lipid concentrations. The data from this study will be used as basic information with the field of functional food research to address how we can apply oriental medicinal resources to foods. Such research currently drawing considerable attention world-wide.