• Journal of the Korean Magnetics Society
• /
• v.26 no.4
• /
• pp.129-132
• /
• 2016

The effect of thermal-nitrification on L1o transfomation in nano-sized FePt particles was studied. As-synthesized FePt nanoparticles by thermal decomposition method have fcc structured phase and their Hc and Ms were 247.34 Oe and 27.308 emu/g, respectively. According to the XRD analysis, phase transformation from fcc (face centered cubic) to fct (face centered tetragonal) structure was revealed by heating under $NH_3+H_2$ mixed-gas atmosphere. Also a slight shift of each (111) peak indicated phase transformation from fcc to fct structure. Hc and Ms of fct FePtN were 1058.2 Oe and 32.718 emu/g, respectively. The nano-sized FePtN magnetic particles synthesized by thermal decomposition method and mixed-gas nitrification are expected for advanced applications such as high density magnetic recording media and biomedical materials.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.156.2-156.2
• /
• 2016

The variation of the surface structure of the Al adsorbed W(110) planes according to the coverage and the substrate temperature has been investigated using LEED and ISS When the Al atoms were adsorbed on the W(110) surface at room temperature, a p($1{\times}1$) of the fcc (111) face were found at the coverage higher than 4 ML. When the substrate temperature was kept at 900 K during Al adsorption and the coverage was 1.0 ML, the surface revealed a p($1{\times}1$) of the bcc(110) face and when the coverage is 1.5 ML, the surface showed a p($1{\times}1$) of the bcc (110) face together with a p($1{\times}1$) double domain structure (fcc (111) face) rotated ${\pm}3^{\circ}$ from the [100] direction of the W(110) surface. When Al atoms were adsorbed on the W(110) surface at the substrate temperature of 1000 K and the coverage was higher than 1.0 ML, the surface revealed a p($1{\times}1$) of the bcc(110) face together with p($1{\times}1$) double domain structure(fcc(111) face) rotated ${\pm}3^{\circ}{\sim}5^{\circ}$ from the [100] direction of the W(110) surface. When Al atoms were adsorbed on the W(110) surface at the substrate temperature of 1100 K and the coverage was 0.5 ML, Al atoms formed a p($2{\times}1$) double domain structure When the coverage was 1.0 ML, the double domain hexagonal structure (fcc(111) face) rotated ${\pm}5^{\circ}$ from the [100] direction of the W(110) surface and another distorted hexagonal structure was found. Low-energy electron diffraction results along with ion scattering spectroscopy results showed that the Al atoms followed the Volmer-Weber growth mode at high temperature.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.1
• /
• pp.76-85
• /
• 2016

This paper presents a method of decision on where bus splitting is needed to reduce fault current level of power systems and to satisfy the fault current constraints. The method employs a modified fault current constrained optimal power flow (FCC-OPF) with X variables for the candidate locations of splitting and for decision making on whether to split or not, it adopts soft-discretization by augmenting inversed U-shaped penalty terms. Also, this paper discusses the procedure on the adequate selection of bus splitting locations based on the results of the modified FCC-OPF, to reduce the total number of the actions taken.

• Journal of Powder Materials
• /
• v.11 no.3
• /
• pp.242-246
• /
• 2004

FePt nanoparticles for high-density magnetic recording media were synthesized by the simultaneous chemical reduction of Fe(acac) $_2$ and Pt(acac) $_2$ with 1,2-hexadecanediol as the reducing reagent. TEM images showed that the shape of as-synthesized FePt nanoparticle was spherical and average particle size was 3 nm. Also, SAD pattern showed that crystal structure was disordered FCC (face centered cubic). These FCC structured nanoparticles were transformed FCT (face centered tetragonal) structure by annealing at 55$0^{\circ}C$ for 30 min in Ar atmosphere. XRD analysis revealed that as-synthesized FePt nanoparticles were transformed from disordered FCC to ordered FCT. Finally, the coercivity of 2 kOe for FePt nanoparticles with FCT structure was obtained by VSM measurement.

• Journal of Korean Vacuum Science & Technology
• /
• v.5 no.2
• /
• pp.43-46
• /
• 2001

Fe-Au alloys are characterized by the complete solubility, and exhibit an fcc-bcc structural transformation at the Fe-rich side. The magneto-optical(equatorial Ken effect : EKE) and optical properties of Fe$\_$1-x/Aux (0 < x < 1) were investigated in the 0.5 - 5.0 eV energy range. The x-ray diffraction study shows the structural fcc-bcc transformation about 80 at. % of Fe. Noticeable changes in the optical properties caused by the fcc-bcc structural transformation was observed. The shape and intensity of the EKE spectra as well as the field dependence of the magneto-optical response were also significantly changed. It is thought that these changes are mainly comes from the induced magnetic moment in Au(and/or the emhanced magnetic moment of Fe). The nature of the prominent structure observed in the UV range of the magneto-optical Ken effect of Au/Fe multilayered films are disscussed in connection with the above results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3A
• /
• pp.157-165
• /
• 2003

The purpose of this paper is to analyze the performance requirements of wireless systems on ultra wide band, which is set by FCC(Federal Communications Commission). Normally the calculation of performance requirements is used in the standard form of each communication systems, but there is no standard in the wireless systems on Ultra WideBand. Therefore, I derive each system parameters through the analysis of new system performance on the basis of the method of Indoor Communication Systems. Additionally, I compare the conditions that are given by FCC with resolution of the performance by domestic law.

• Electronics and Telecommunications Trends
• /
• v.22 no.1 s.103
• /
• pp.140-150
• /
• 2007

차세대 유무선 통신망이 급속하게 All-IP 기반으로 전환되어 감에 따라 전세계적으로 인터넷전화 서비스가 기존 유선전화를 빠르게 대체해 나가고 있다. 그러나, 이와 관련된 적절한 규제없이 서비스가 진행됨에 따라 시민의 안전을 위협하는 사례가 발생되고있다. 따라서, 미국의 연방통신위원회(FCC)에서는 2005년 5월 인터넷전화 서비스 제공업체에게 긴급통화 서비스 제공에 대한 의무를 규정한 VoIP E911 고시(order)를 제정하였다. VoIP E911 고시는 고시의 대상이 되는 서비스를 정의하고, 고시의 발표일이후 120일 이내인 2005년 11월 28일까지 E911 서비스 요구사항을 준수하라는 내용을 담고 있다. 이후 2005년 11월 7일에 연방통신위원회(FCC)에서는 인터넷전화 서비스 제공업체들에게 VoIP E911 고시의 이행현황에 대하여 2005년 11월 28일까지 제출하라고 하였다. 따라서, 본 고에서는 연방통신위원회(FCC)의 VoIP E911 고시(order)를 중심으로 미국의 VoIP 긴급통화 정책동향에 대하여 분석하고자 한다.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.770-775
• /
• 2001

Effects of magnetic field and carrier gas velocity on the magnetic separation of FCC catalyst by a high gradient magnetic separator were studied. The activities of the equilibrium catalyst, the magnetic particles and the nonmagnetic particles were evaluated in a fixed bed microreactor The results showed that heavy metal contaminated catalyst can be selectively separated by means of high gradient magnetic separation at magnetic field 0.5T and carrier gas velocity 0.3m.s$^{-1}$ , and lightly metal contaminated catalyst retained high catalytic activity.

• Progress in Superconductivity and Cryogenics
• /
• v.14 no.4
• /
• pp.36-40
• /
• 2012

This paper presents an experimental and numerical study on current limiting characteristics of a fault current controller (FCC). The FCC consists of an AC/DC power converter, a superconducting coil, and a control unit. Even though some previous researches proved that the FCC could adjust the fault current level, the current limiting characteristics by the superconducting coil should be investigated for design of the coil. In this paper, four kinds of model coils were tested; 1) air core, 2) iron core without any bias, 3) reversely magnetized core (RMC) using permanent magnets, and 4) RMC using an electromagnet. Based on a comparative study, it is confirmed that a RMC by an electromagnet (EM) could increase the effective inductance of the coil. In this paper, a numerical code to simulate the HTS coil with RMC was developed. This code can be applied to design the HTS coil with active reversely magnetized bias coil.

• The Plant Pathology Journal
• /
• v.32 no.3
• /
• pp.173-181
• /
• 2016

Gene disruption by homologous recombination is widely used to investigate and analyze the function of genes in Fusarium fujikuroi, a fungus that causes bakanae disease and root rot symptoms in rice. To generate gene deletion constructs, the use of conventional cloning methods, which rely on restriction enzymes and ligases, has had limited success due to a lack of unique restriction enzyme sites. Although strategies that avoid the use of restriction enzymes have been employed to overcome this issue, these methods require complicated PCR steps or are frequently inefficient. Here, we introduce a cloning system that utilizes multi-fragment assembly by In-Fusion to generate a gene disruption construct. This method utilizes DNA fragment fusion and requires only one PCR step and one reaction for construction. Using this strategy, a gene disruption construct for Fusarium cyclin C1 (FCC1), which is associated with fumonisin B1 bio-synthesis, was successfully created and used for fungal transformation. In vivo and in vitro experiments using confirmed fcc1 mutants suggest that fumonisin production is closely related to disease symptoms exhibited by F. fujikuroi strain B14. Taken together, this multi-fragment assembly method represents a simpler and a more convenient process for targeted gene disruption in fungi.