• Proceedings of the KWS Conference
• /
• 2003.11a
• /
• pp.227-229
• /
• 2003

Low heat input welding methods have been investigated in order to minimize the HAZ softening of the 600MPa grade fine grained steel weldment. The welding processes of interest were a high speed FCA welding with a multi-torch welding system, laser welding with filler feeding and hybrid laser welding. No HAZ softening was found for all the weldments formed with low heat input less than 10kJ/cm. Tensile strength of the weldments was high enough to satisfy the required value. Impact toughness of the weldments was also good even at -20$^{\circ}C$.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10a
• /
• pp.103-105
• /
• 2004

계층적 개념 트리는 개념의 전체적인 구조를 제공하여 사용자의 이해를 돕는다. 이러한 계층적 개념 트리는 특정 분야의 전문가나 지식 공학자, 혹은 개인에 의해서 제공되어 왔다. 하지만 계층적 개념 트리를 구축하기 위해서는 않은 시간과 노력이 요구된다. 따라서 계층적 개념 트리를 자동으로 구축하기 위한 시스템 필요하게 되었다. 이 논문에서는 정보 검색 틴 온톨로지 연구에 있어서 계층적 개념 트리를 자동으로 구축하기 위한 기존 연구에 대해서 알아보고, 개념적 클러스터링 방법인 FCA(Formal Concept Analysis)를 사용하여 문서로부터 계층적 개념 트리를 구축하는 방법을 제안하고자 한다.

• Journal of Advanced Navigation Technology
• /
• v.11 no.4
• /
• pp.415-422
• /
• 2007

In this paper, we proposed a new dynamic channel allocation algorithm for TD-SCDMA with cross time slots. In order to reduce the interference in cross time slot, the mobile stations (MSs) are divided into two groups: the Near Group consisting of MSs near by the base station(BS) and the Far Group including the MSs far from the BS. The reverse link for MSs in the Near Group and forward link for MSs in the Far Group are allocated to the cross time slot. In cellular systems, a BS has multiple neighbor BSs. Some of neighbor BSs can operate in the same direction link while the others have cross time slot. Thus, it is required to determine which BS has the most significant impact in terms of interference. We divide each cell into 6 areas based on the direction of arrival of smart antenna and the most significant neighbor sector is determined with this division. The proposed allocation method and area division method can avoid the severe interference in cross time slots and increase the system capacity about 2%~9% compared to FCA, and 0.5%~1.3% compared to RCA.

• Journal of Welding and Joining
• /
• v.32 no.4
• /
• pp.26-33
• /
• 2014

The metallurgical and mechanical characteristics, toughness and corrosion resistance of dissimilar welds between super duplex stainless steel UNS S32750 and carbon steel ASTM A516Gr.70 have been evaluated. Three heat inputs of 21.12, 24.00, 26.88kJ/cm were employed to make joints of dissimilar metals with flux cored arc welding(FCAW). Based on microstructural examination, vermicular ferrite was formed in the first layer of weld at low heat input(21.12kJ/cm) and $Cr_{eq}/Ni_{eq}$ of 1.61 while acicular ferrite was formed in last layer of weld at high heat input(26.88kJ/cm) and $Cr_{eq}/Ni_{eq}$ of 1.72. Ferrite percentage in dissimilar welds was lowest in the first layer of weld regardless of heat inputs and it gradually increased in the second and third layers of weld. Heat affected zone showed higher hardness than the weld metal although reheated zone showed lower hardness than weld metal due to the formation of secondary austenite. Tensile strengths of dissimilar welds increased with heat input and there was 100MPa difference. The corrosion test by ferric chloride solution showed that carbon steel had poor corrosion resistance and pitting corrosion occurred in the first layer(root pass) of weld due to the presence of reheated zone where secondary austenite was formed. The salt spray test of carbon steel showed that the surface only corroded but the amount of weight loss was extremely low.

• Journal of Welding and Joining
• /
• v.34 no.3
• /
• pp.69-76
• /
• 2016

Characteristics of dissimilar metal welds between ASTM Type 316L and carbon steel ASTM A516 Gr.70 made with FCAW were evaluated in terms of microstructure, ferrite content, EDS analysis, hardness, tensile strength, impact toughness and corrosion resistance. Three heat inputs of 10.4, 16.9, 23.4kJ/cm were employed to make joints of dissimilar metals with E309LMoT1-1 wire. Microstructure of dissimilar weld metals consisted of mostly vermicular type of ${\delta}$-ferrite and some lathy type of ${\delta}$-ferrite, and ${\delta}$-ferrite was transformed into globular type in reheated zone. In all conditions, weld metals were solidified on FA solidification mode. Based on the EDS analysis of weld metals, All Creq/Nieq values were in the range of FA solidification mode, and it was decreased with increasing heat inputs whereas it was increased with increasing layers. The amount of ${\delta}$-ferrite was decreased with increasing heat input due to the difference of cooling rate, and it was increased with increasing layers. Accordingly, hardness and tensile strength of dissimilar metals weld joints was decreased with increasing heat input while impact energy was increased with increasing heat input. Corrosion test of dissimilar metals weld joints showed that weight gain rate of heat input 10.4kJ/cm was the greatest, and that of three heat inputs became constant after certain time.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.314-314
• /
• 2016

In this paper, the effects of carrier concentration on dielectric constant of ITO films were investigated by spectroscopic ellipsometry. From SE results, we find the pronounced shift of the ${\varepsilon}1$ peaks toward high energy with concentration; while contrarily, the ${\varepsilon}2$ values at low energy region increases with decreasing concentration. These shifts are attributed to the Burstein-Moss and free-carrier absorption effects within ITO films. With increases carrier concentration, the values of extinction coefficients show quite different behaviors in range of wavelength from 200 to 1200 nm. The reduction in k at ${\lambda}{\leq}500nm$, while increasing at ${\lambda}{\geq}500nm$ was observed. The QE of HJ solar cells behaviors can be roughly classified into two regions: short-wavelengths (${\leq}650nm$) and long-wavelengths region (${\geq}650nm$). With increasing carrier concentration as well as energy band gap, QE shows improvement at short-wavelength, while at long-wavelength QE shows opposite trend. Widening band gap energy due to Burstein-Moss shift is the key to improve QE in short-wavelength; simultaneously FCA effect due to optical scattering is attributed to the reduction in QE at long-wavelength. In spite of band gap extension, Jsc calculated from QE decreases from 34.7 mA/cm2 to 33.2 mA/cm2 with increasing carrier concentration. It demonstrated that FCA effect may more govern Jsc in the HJ solar cells.

• The korean journal of orthodontics
• /
• v.19 no.1 s.27
• /
• pp.169-185
• /
• 1989

The purpose of this study was to establish Korean norms that will be valuable aids for diagnosis in orthognathic surgery patients. Lateral cephalometric measurements were established for adult Koreans (60 males, 62 females) with normal occlusion and acceptable profiles. The results were as follows: 1. Means, standard deviation and sexual differentiation were included within each measurement. 2. In skeletal measurements, FH to SN and SN to mandibular plane measurements in females were larger than those in males while all linear measurements in males were larger than those in males were larger than those in females. 3. Significant differences were observed between male and female groups on all of the items that showed vertical relationship in dental measurements. And the measurements of ADH, PDH and overbite in males were larger than those in females while the measurements of incisor exposure in females were larger than those in males. 4. In all measurements of soft tissue except NLA, that is, of FCA, UFH, ULL and LLL, males were larger than those in females.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.5
• /
• pp.1043-1053
• /
• 2017

In this study, genotyping was executed by using 13 microsatellite markers for genetic diversity of 224 Gorals (Saanen(88), Laoshan(67), Toggenburg(32), Alpine(12), Anglonubian(9), Jamnapari(7) and Black Bengal(4)). The number of alleles was observed 4 (INRA005) to 18 (SRCRSP23) each markers. Observed heterozygostiy ($H_{obs}$), expected heterozygosity ($H_{\exp}$) and polymorphism information content (PIC) were observed 0.482 to 0.786, 0.476 to 0.923, and 0.392 to 0.915, respectively. Principal Components Analysis(PCoA) results were similar to the results of FCA. NE-I(on-exclusion probability for identity of two unrelated individuals) was estimated at $2.47{\times}10^{-15}$. In conclusion, this study shows the useful data that be utilized as a basic data of Gorals breeding and development.

• Biomolecules & Therapeutics
• /
• v.5 no.2
• /
• pp.117-124
• /
• 1997

The analgesic effects of DA-5018, a new caosaucin derivative, were evaluated in various experimental pain models. Drugs were administered subcutaneously or topically. When drugs were administered subcutaneously, 1) the $ED_{50}$ of DA-5018, morphine . HCI, capsaicin and acetaminophen were 0.091-2.0, 0.3-4.3, 1.4-26.5 and 45.4-643 mg/kg, respectively in various pain or inflammatory models including acetic acid writhing, formalin, tail flick, Randall-Selitto, hot plate and crouton oil-induced ear edema test, 2) the AD2 values (the dose for doubling of pain threshold of vehicle control) of DA-5018, capsaicin and ketoprpgin were 1.07 $\pm$ 0. 18, 23.47$\pm$4.46 and 2.97$\pm$0.43 mg/kg in Freund's complete adjuvant (FCA)-induced arthritic pain model. And by topical application, 1) neither DA-5018 0.3% cream nor Zostrix-HP (capsaicin 0.075%) were effective in formalin test, 2) although DA-5018 0.3% cream significantly inhibited the croton oil-induced ear edema being better than Zostrix-HP and Kenofen (ketoprofen 3%). 3) In FCA model, DA-5018 0.3% cream reversed the decreased pain threshold of arthritic rat from 136.4 g (day 0) to 289.0 g (day 5) and 250.1 g (day 10), which was similar to Zostrix-HP. These results suggest that DA-5018 administered subcutaneously has a potent and broad analgesic spectrum than nonsteroidal antiinflammatory drugs against acute and chronic pain, and by topical application it exerts comparable analgesic and antiinglammaatory effects to capsaicin cream.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.43
• /
• pp.53-74
• /
• 2009

INCOTERMS have been changed almost every 10 years since ICC established INCOTERMS as trade terms for International transaction. Recently transportation has become bigger, and modernized by means of electronic appliances such as RFID, IT, and containerization. FRC, FOR/FOT, FOA were added in INCOTERMS1980 and every conditions are unified into three alphabets in INCOTERMS1990. The best features of INCOTERMS2000 are that FCA substitute FRC, FOR/FOT, FOA and customs formalities were simplified to make clear for each party of contract. It seems that business circles still stick to old customs of their trade like FOB or CIF not only in Korea but in an international practice even though there have been several revisions of INCOTERMS until now. ICC have tried to provide INCOTERMS3000 to solve problems between a theory and an actual condition of international trade. This study has tried to suggest opinions against INCOTERMS3000 and has surveyed a recognition, an actual using situation and issues of INCOTERMS to get improvements. For a recognition of INCOTERMS has been spread as you can find at tables many kinds of business circles still stick to old customs of their trade terms FOB and CIF. Now there are two alternative plans. Firstly, we need to suggest improvements against inconsistency of INCOTERMS to be applied on newly revised INCOTERMS3000 and educating business circles to use proper conditions of INCOTERMS for their doing business. Secondly, we shall participate in revising INCOTERMS to activate multimodal transport conditions of INCOTERMS and provide solutions to fill gap between a theory and an actual condition of international trade. It seems that terms of multimodal transport such as FCA, CPT, or CIP can be a perfect condition for each party of contract. We have examined the inconsistent features of Ship's rail and notions of on board, and observed how to activate multimodal transport terms. These would be hot issues of next revision of INCOTERMS and we provided improvements on each trade terms, THC charges, or others against INCOTERMS.