• Nuclear Engineering and Technology
• /
• 제36권3호
• /
• pp.276-284
• /
• 2004

This paper presents the results of the TEXAS-V computer code simulations of FARO L-14, L-28, and L-33. The old break-up model and new break-up model are tested to compare the respective simulations of each. As these experimental data sets cover a wide range of ambient pressures, sub-cooling of the water pool, and the melt jet diameters, the results of the simulations will be beneficial in assessing the TEXAS-V code's capability to predict the steam explosion phenomena in a prototypical reactor case. The current model was found to have some deficiencies, and the modules for the fragmentation, the equation of state, and the interfacial area for each flow regime in TEXAS-V were improved for the simulation of FARO L28 and FARO L-33.

• Nuclear Engineering and Technology
• /
• 제36권6호
• /
• pp.571-581
• /
• 2004

A methodology is proposed for the evaluation of a steam explosion load on a reactor scale by evaluating the steam explosion model against the experimental data. Being part of the OECD/SERENA program,, appropriate data was selected by international experts and the analytical model of TEXAS-V was chosen. The procedure consists of two steps. the pre-mixing model was verified against the FARO L-14 and FARO L-28 data. The explosion model was verified against the experimental data of KROTOS-44, FARO L-33, TROI-13, and TROI-34. The capabilities and deficiencies of the fundamental models of the TEXAS-V are reviewed in terms of their adequacy in a simulation of steam explosion on a reactor scale.

• Journal of Trauma and Injury
• /
• 제32권3호
• /
• pp.176-180
• /
• 2019

The growing use of laparoscopy in elective surgery has led to its increase utilization in emergency surgery. However, the employment of laparoscopy in abdominal trauma is still unusual. Here in we report a case of a patient with blunt abdominal trauma that resulted in a combination of exceptional traumatic lesions, diaphragmatic and bladder lacerations. Both injuries were diagnosed and successfully resolved by laparoscopy. The report of this type of lesions and resolution is extremely rare, being this the second case described in the international literature. This article intends to show that laparoscopy may not only be used as a diagnostic tool, but also as a therapeutic instrument in selected cases of blunt abdominal trauma.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 추계학술발표회논문집(1)
• /
• pp.732-737
• /
• 1997

본 연구에서는 IFC6.0코드 검증과 개선점 파악을 목적으로 유럽공동체 연구소 JRC-Ispra에서 수행한 Faro L-14실험을 모의하였으며 이는 ISP-39 참여하에 수행하였다. ISP-39는 용융물과 냉각재 반응 시 용융물 냉각 현상에 있어 관련 해석 코드를 검증하고 각 코드의 한계점을 파악하는데 그 목적을 두고 있다. 계산 결과 용기 내 압력상승 및 냉각재 상승에 관한 경향은 잘 모의하고 있다. 한편 절대값에 있어 실험치에 미치지 못하는 것은 냉각재와의 혼합 시 용융물의 분쇄가 실제보다 덜 예측되고 이에 따른 열전달량의 예측 미달로 인한 것으로 보이며 결국 Lagrangian코드개발의 필요성이 확인되었다.

• Journal of Multimedia Information System
• /
• 제2권3호
• /
• pp.255-262
• /
• 2015

The modern manufacturing systems and technologies produce products that are more accurate day by day. This can be reached mainly by improvement the manufacturing process with at the same time restricting more and more the quality specifications and reducing the uncertainty in part. The main objective an industry becomes to lower the part's variability, since the less variability - the better is product. One of the part of this task is measuring the object's uncertainty. The main purpose of this study is to understand the application of bootstrap method for uncertainty evaluation. Bootstrap method is a collection of sample re-use techniques designed to estimate standard errors and confidence intervals. In the case study a surface of an automobile engine block - (Top view side) is measured by Coordinate Measuring Machine (CMM) and analyzed for uncertainty using Geometric Least Squares in complex with bootstrap method. The designed experiment is composed by three similar measurements (the same features in unique reference system), but with different points (5, 10, 20) concentration at each level. Then each cloud of points was independently analyzed by means of non-linear Least Squares, after estimated results have been reported. A MatLAB software tool used to generate new samples using bootstrap function. The results of the designed experiment are summarized and show that the bootstrap method provides the possibility to evaluate the uncertainty without repeating the Coordinate Measuring Machine (CMM) measurements many times, i.e. potentially can reduce the measuring time.

• 터널과지하공간
• /
• 제30권4호
• /
• pp.417-431
• /
• 2020

이 연구에서는 라이다(LiDAR) 반사강도를 이용하여 암반 풍화도 및 변질도를 산정하는 작업의 기초연구를 진행하였다. 실내 시험을 통하여 라이다 반사강도에 직접적으로 영향을 미치는 인자와 그 영향 정도를 정량적으로 고찰하고자 하였다. 영향 인자로는 주사거리, 입사각, 표면거칠기, 표면색상, 암석물성, 광물조성, 포화도를 선정하였다. 실험에서는 FARO 라이다 장비와 12가지 종류의 시험편을 사용하였다. 실험 결과 반사강도는 표면색상, 입사각, 주사거리, 암석물성, 포화도 혹은 표면습윤상태, 표면거칠기 순으로 영향을 크게 미치는 것으로 나타났다.

• 한국정보통신학회논문지
• /
• 제24권2호
• /
• pp.304-310
• /
• 2020

본 연구는 레이저스캐닝과 포토그래메트리 소프트웨어를 이용한 3D모델링과 실제 수목 사이의 재현 특성(수형, 질감, 세부 치수)을 비교분석하여 그 활용성을 밝히는데 있다. 연구 방법은 포토그래메트리(Pix4d)와 3D스캐너(Faro S350)를 이용하여 향나무를 3D모델링으로 재현하였다. 연구 결과 3D스캐닝과 포토그래메트리 모두 높은 재현성을 보였다. 특히 원거리에서 UAVs로 촬영한 포토그래메트리에 비해, 3D스캐닝 기술은 수피와 잎의 재현에 있어 매우 우수한 결과를 보였다. 수목의 세부 치수를 비교한 결과, 실제 수목과 3D스캐닝 사이의 오차는 1.7~2.2%로 스캐닝 결과가 실제 수목보다 크게 나타났으며, 실제 수목과 포토그래메트리 사이의 오차는 0.2~0.5%로 포토그래메트리에 의한 모델링이 실제 수목보다 크게 측정되었다. 본 연구는 수목의 가상 3D모델링 구현특성을 살핌으로써, 향후 BIM을 위한 조경수목 DB 구축, 증강현실 연계 조경 설계 및 경관 분석, 노거수의 보전 등의 활용을 위한 기초 연구로서 의의를 가진다.

• Nuclear Engineering and Technology
• /
• 제41권5호
• /
• pp.603-616
• /
• 2009

The past two decades were mainly devoted to model validation and computer code verification against global corium experiments, code application to reactor situations, and investigation of the role of melt properties in steam explosion energetics. Corium data were essentially provided by JRC-Ispra in the FARO and KROTOS facilities and by KAERI in the TROI facility. Verification of code applicability to reactor situations was performed essentially in the frame of the international OECD/SERENA programme. The paper makes a synthesis of the findings made during the above-mentioned period and expresses a personal view of the author with respect to the progress made and expected for the resolution of the steam explosion issue for light water reactors.

• Imaging Science in Dentistry
• /
• 제45권1호
• /
• pp.61-65
• /
• 2015

The mental foramen is a bilateral opening in the vestibular portion of the mandible through which nerve endings, such as the mental nerve, emerge. In general, the mental foramen is located between the lower premolars. This region is a common area for the placement of dental implants. It is very important to identify anatomical variations in presurgical imaging exams since damage to neurovascular bundles may have a direct influence on treatment success. In the hemimandible, the mental foramen normally appears as a single structure, but there are some rare reports on the presence and number of anatomical variations; these variations may include accessory foramina. The present report describes the presence of accessory mental foramina in the right mandible, as detected by cone-beam computed tomography before dental implant placement.

• Animal Bioscience
• /
• 제35권7호
• /
• pp.955-963
• /
• 2022

Objective: The aim of this study was to estimate genetic parameters for 305-day cumulative milk yield and components, growth, and reproductive traits in Guzerá cattle. Methods: The evaluated traits were 305-day first-lactation cumulative yields (kg) of milk (MY305), fat (FY305), protein (PY305), lactose (LY305), and total solids (SY305); age at first calving (AFC) in days; adjusted scrotal perimeter (cm) at the ages of 365 (SP365) and 450 (SP450) days; and adjusted body weight (kg) at the ages of 210 (W210), 365 (W365), and 450 (W450) days. The (co)variance components were estimated using the restricted maximum likelihood method for single-trait, bi-trait and tri-trait analyses. Contemporary groups and additive genetic effects were included in the general mixed model. Maternal genetic and permanent environmental effects were also included for W210. Results: The direct heritability estimates ranged from 0.16 (W210) to 0.32 (MY305). The maternal heritability estimate for W210 was 0.03. Genetic correlation estimates among milk production traits and growth traits ranged from 0.92 to 0.99 and from 0.92 to 0.99, respectively. For milk production and growth traits, the genetic correlations ranged from 0.33 to 0.56. The genetic correlations among AFC and all other traits were negative (-0.43 to -0.27). Scrotal perimeter traits and body weights showed genetic correlations ranging from 0.41 to 0.46, and scrotal perimeter and milk production traits showed genetic correlations ranging from 0.11 to 0.30. The phenotypic correlations were similar in direction (same sign) and lower than the corresponding genetic correlations. Conclusion: These results suggest the viability and potential of joint selection for dairy and beef traits in Guzerá cattle, taking into account reproductive traits.