• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2011년도 한국우주과학회보 제20권1호
• /
• pp.23.1-23.1
• /
• 2011

The SMT is a subsystem of the UFFO (Ultra-Fast Flash Observatory) pathfinder onboard the Lomonosov spacecraft planed to be launched in November 2011. The UFFO is designed for extremely fast observation of optical afterglow of Gamma Ray Burst (GRB). This study is primarily concerned with performance measurement of the SMT optical system under the integration and test phase. SMT is a 100mm Ritchey-Chretien type telescope with a motorized slewing mirror and a $256{\times}256$ pixels Intensified Charge-Coupled Device (ICCD) of 22.2${\mu}m$ in pixel size. SMT is designed to operate over the wavelength coverage between 200 nm and 650 nm. It has 17 arcmin FOV (Field of View), providing 4arcsec in detector pixel resolution. In this study, we describe the integration and test process of the SMT optical system and interim performance measurement results with motorized slewing mirror and ICCD.

• Journal of Electrical Engineering and Technology
• /
• 제4권2호
• /
• pp.219-228
• /
• 2009

The growing application and the numerous qualities of induction motors (1M) in industrial processes that require high security and reliability levels has led to the development of multiple methods for early fault detection. However, various faults can occur, such as stator short-circuits and rotor failures. Traditionally the diagnosis machine is done through a sinusoidal power supply, in the present paper we study experimentally the effects of the rotor failures, such as broken rotor bars in function of the ac supplying, the load and show the impact of the converter from diagnosis of the machine. The technique diagnosis used is based on the spectral analysis of stator currents or stator voltages respectively according to the types of induction motor ac supplying. So, four different ac supplying are considered: ${\odot}$ the IM is directly by the balanced three-phase network voltage source, ${\odot}$ the IM is fed by a sinusoidal current source given the controlled by hysteresis, ${\odot}$ the IM is fed (in open loop) by a scalar control imposing through ratio V/f=constant, ${\odot}$ the IM is controlled through a vector control using space vector pulse width modulation (SVPWM) technique inverter with an outer speed loop.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.1027-1036
• /
• 2018

In this paper a new generalized space vector pulse width modulation scheme is proposed based on the principle of reverse mapping to drive the switches of multilevel inverters. This projected scheme is developed based on the middle vector of the subhexagon which holds the tip of the reference vector, which plays a major role in mapping the reference vector. A new approach is offered to produce middle vector of the subhexagon which holds tip of the reference vector in the multilevel space vector plane. By using middle vector of the subhexagon, reference vector is linked towards the inner two level sub-hexagon. Then switching vectors, switching sequence and dwell times corresponding to a particular sector of a two-level inverter are determined. After that, by using the two level stage findings, the switching vectors related to exact position of the reference vector are directly generated based on principle of the reverse mapping approach and do not need to be found at n level stage. In the reverse mapping principle, the middle vector of subhexagon is added to the formerly found two level switching vectors. The proposed generalized algorithm is efficient and it can be applied to an inverter of any level. In this paper, the proposed scheme is explained for a five-level inverter and the performance is analyzed for five level and three level inverters through MATLAB. The simulation results are validated by implementing the propose scheme on a V/f controlled three-level inverter fed induction motor using dSPACE control desk.

• 한국강구조학회 논문집
• /
• 제12권3호통권46호
• /
• pp.303-315
• /
• 2000

본 논문에서는 일반화된 21개 강성 매트릭스의 독립 변수를 모두 사용하였고 비등방성 3차원 탄성체의 지배 방정식 및 수치 해석 근사식을 유도하였다. 일반화된 3차원 해석은 2차원 해석의 제한성을 극복하는 정밀해를 보여줄 수 있으며, 두꺼운 보나 판, 또는 쉘에서 전단 변형 효과에 의한 처짐의 증가 효과를 더욱 정밀하게 해석할 수 있다. 따라서 본 논문은 3차원 비등방성 탄성체에 대하여 다양한 경계조건에 따른 유한 차분식을 유도하였으며 이를 전산화하여 해석 프로그램을 개발하였다. 특히, 본 논문에서는 자유경계조건에 대하여 개선된 유한차분법의 적용 방식을 제시하였다. 또한 탄성체의 각 방향 자유경계면에서 경계조건을 해결할 수 있는 일반화된 방식을 제시하였다. 몇가지 수치예제를 통하여 이러한 유한차분 경계처리 방식에 의한 비등방성 3차원 탄성체 해석의 타당성 및 거동을 분석하였다.

• Journal of Nutrition and Health
• /
• 제33권6호
• /
• pp.632-638
• /
• 2000

This study was designed to observe the effect of green tea on colon tumor incidence and biomarkers of colon carcinogenesis in 1, 2-dimethlhydrazine-treated rats. Male Sprague Dawley rats at 7 weeks of age were divided into two groups: control and green tea(GT) groups. Control rats had distilled water as drinking water but GT group received green tea extracts(2.5%, w/v water) as drinking water throughout the experiment periods. All rats were fed the experimental diet containing 15% fat by weight for 20 weeks. and were i.m. injected with DMH for 6 weeks to give total dose of 180mg/kg body weight. Tumor incidence was reduced in GT group (39%) compared with control group (56%) Green tea significantly reduced cell proliferation (total cells per crypt, crypt length and proliferative zone) in colonic mucosa and also significantly reduced the levels of preformed prostalandin E2(PGE2) and thromboxance B2(TXB2) in colonic mucosa but the fatty acid profile of total lipid in colonic mucosa was not significantly influenced by green tea. However the relative percent of C20:4 and the levels f preformed PGE2 and TXB2. were significantly higher in tumor tissue compared with normal surrounding mucosa.Green tea increased the fecal excretion of total bile acid but not scondary bile acid which is known as one of promoters for colon cancer,. These results suggest that green tea could have preventive effect against colon cancer when consumed daily by influencing on antioxidant effect and the metabolism of arachidonic acid.

• 한국재료학회지
• /
• 제20권7호
• /
• pp.374-378
• /
• 2010

$MgTiO_3$ thin films were prepared by r.f. magnetron sputtering in order to prepare miniaturized NPO type MLCCs. $MgTiO_3$ films showed a polycrystalline structure of ilmenite characterized by the appearance of (110) and (202) peaks. The intensity of the peaks decreased with an increase in the chamber pressure due to the decrease of crystallinity which resulted from the decrease of kinetic energy of the sputtered atoms. The films annealed at $600^{\circ}C$ for 60min. showed a fine grained microstructure without micro-cracks. The grain size and roughness of the $MgTiO_3$ films decreased with the increase of chamber pressure. The average surface roughness was 1.425~0.313 nm for $MgTiO_3$ films prepared at 10~70 mTorr. $MgTiO_3$ films showed a dielectric constant of 17~19.7 and a dissipation factor of 2.1~4.9% at 1MHz. The dielectric constant of the films is similar to that of bulk ceramics. The dielectric constant and the dissipation factor decreased with the increase of the chamber pressure due to the decrease of grain size and crystallinity. The leakage current density was $10^{-5}\sim10^{-7}A/cm^2$ at 200kV/cm and this value decreased with the increase of the chamber pressure. The small grain size and smooth surface microstructure of the films deposited at high chamber pressure resulted in a low leakage current density. $MgTiO_3$ films showed a near zero temperature coefficient and satisfied the specifications for NPO type materials. The dielectric properties of the $MgTiO_3$ thin films prepared by sputtering suggest the feasibility of their application for MLCCs.

• 한국환경생태학회지
• /
• 제8권2호
• /
• pp.121-134
• /
• 1995

주왕산국립공원 소나무림의 식물군집구조분석을 위하여 25개소에 조사구(1개 조사구당 l00$m^2$)를 설치하고 식생조사를 실시하여 TWINSPAN에 의한 classification과 DCA에 의한 ordination기법을 이용하여 분석하였다. 전체 조사구는 TWINSPAN에 의하여 소나무-굴참나무군집, 소나무-졸참나무군집, 소나무-쇠물푸레군집, 소나무-쇠물푸레-참나무류군집, 소나무-활엽수혼효림군집 등 5개의 군집으로 분리되었다. 본 조사지의 천이계열은 교목상층에서는 소나무$\longrightarrow$졸참나무, 신갈나무$\longrightarrow$서어나무, 교목하층 및 관목층에서는 조록싸리, 참싸리, 진달래$\longrightarrow$쪽동백나무, 국수나무, 산초$\longrightarrow$당단풍, 생강나무로 추정되었다. 환경인자인 토양함수량과 토양산도는 군집간 차이가 없었다.

• Corrosion Science and Technology
• /
• 제12권6호
• /
• pp.274-279
• /
• 2013

Flow accelerated corrosion (FAC) of the carbon steel piping in nuclear power plants (NPPs) has been major issue in nuclear industry. During the FAC, a protective oxide layer on carbon steel dissolves into flowing water leading to a thinning of the oxide layer and accelerating corrosion of base material. As a result, severe failures may occur in the piping and equipment of NPPs. Effect of alloying elements on FAC of pipe materials was studied with rotating cylinder FAC test facility at $150^{\circ}C$ and at flow velocity of 4m/s. The facility is equipped with on line monitoring of pH, conductivity, dissolved oxygen(DO) and temperature. Test solution was the demineralized water, and DO concentration was less than 1 ppb. Surface appearance of A 106 Gr. B which is used widely in secondary pipe in NPPs showed orange peel appearance, typical appearance of FAC. The materials with Cr content higher than 0.17wt.% showed pit. The pit is thought to early degradation mode of FAC. The corrosion product within the pit was enriched with Cr, Mo, Cu, Ni and S. But S was not detected in SA336 F22V with 2.25wt.% Cr. The enrichment of Cr and Mo seemed to be related with low, solubility of Cr and Mo compared to Fe. Measured FAC rate was compared with Ducreaux's relationship and showed slightly lower FAC rate than Ducreaux's relationship.

• 한국재료학회지
• /
• 제13권5호
• /
• pp.333-337
• /
• 2003

We report a new fabrication process for carbon nanotube field emitters with high performance. The key of the fabrication process is trim-and-leveling the carbon nanotubes grown in trench structures by employing a planarization process, which leads to a uniform distance from the carbon nanotube tip to the electrode. In order to enable this processing, spin-on-glass liquid is applied over the CNTs grown in trench to have them stubborn adhesion among themselves as well as to the substrate. Thus fabricated emitters reveal an extremely stable emission and aging characteristics with a large current density of 40 ㎃/$\textrm{cm}^2$ at 4.5 V/$\mu\textrm{m}$. The field enhancement factor calculated from the F-N plot is $1.83${\times}$10^{5}$ $cm^{－1}$ , which is a very high value and indicates a superior quality of the emitter originating from the nature of open-tip and high stability of the carbon nanotubes obtained new process.

• Transactions on Electrical and Electronic Materials
• /
• 제4권2호
• /
• pp.29-34
• /
• 2003

Ferroelectric YMnO$_3$ thin films were etched with Ar/C1$_2$ and CF$_4$/C1$_2$ Plasma. The maximum etch rate of YMnO$_3$ thin film was 300 $\AA$/min at a Cl$_2$/Ar gas mixing ratio of 8/2, an RF power of 800 W, a do bias of-200 V, a chamber pressure of 15 mTorr, and a substrate temperature of 3$0^{\circ}C$. From the X-ray photoelectron spectroscopy (XPS) analysis, yttrium was not only etched by chemical reactions with Cl atoms, but also assisted by Ar ion bombardments in Ar/C1$_2$ plasma. In CF$_4$/C1$_2$ plasma, yttrium formed nonvolatile YF$_{x}$ compounds and remained on and the etched surface of YMnO$_3$. Manganese etched effectively by forming volatile MnCl$_{x}$ and MnF$_{y}$. From the X-ray diffraction (XRD) analysis, the (0004) diffraction peak intensity of the YMnO$_3$ thin film etched in Ar/Cl$_2$ plasma shows lower than that in CF$_4$/Cl$_2$ plasma. It indicates that the crystallinty of the YMnO$_3$ thin film is more easily damaged by the Af ion bombardment than the changes of stoichiometry due to nonvolatile etch by-products.cts.s.