• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.163-168
• /
• 1991

본 연구에서는 여러가지의 성형조건에서 미끄름을 지배하는 상수를 측정하고, 유동 선단(flow front)에 미치는 이 상수의 영향을 검토한다. 또 측정된 상수를 가 지고 사각형 및 중공 원형 평판 압축성형에 대해서 2차원 유한 요소해석을 하고 실험 결과와 비교 검토한다.

• 대한토목학회논문집
• /
• 제11권4호
• /
• pp.1-8
• /
• 1991

최근에 피로하중을 받는 보나 기둥 구조물에 강섬유의 사용이 증가하는 추세이다. 예로서 교량, 고속도로, 비행장 그리고 빌딩 등이다. 본 연구에서는 강섬유를 혼입한 철근 콘크리트 보에 대하여 정적실험과 피로실험을 중점적으로 실시했다. 본 연구의 대상모형은 강섬유를 1% 또는 2% 포함한 경우, 스터럽이 있는 경우와 없는 경우로 구별하였다. 피로실험에 있어서 보의 파괴는 강섬유의 뽑힘이 아니라 절단에 있다는 사실을 확인할 수 있었으며, 강섬유 보강 콘크리트보의 해석적 적용성을 검토하기 위하여 실험의 결과치와 수치해석을 비교했는데 수치해석은 비선형 유한요소 프로그램(ADINA)을 사용했다.

• 대한기계학회논문집
• /
• 제9권6호
• /
• pp.725-731
• /
• 1985

본 논문에서는 Chen, Kobayashi에 의한 강소성 유한요소법 프로그램을 이용하 여 마찰조건 및 형상비(H$_{O}$/D$_{O}$)가 0.75, 1.0, 1.5에 따른 금형 접촉면상의 응력분포 및 반경방향 증분량 그리고 번형률 분포 등을 고찰하고 실제로 알루미늄과 .alpha.-황동의 두 종류 재료를 사용하여 이론과 동일한 마찰조건과 형상비에 대해 실험함 으로써 그 변형 특성을 F.E.M. 결과와도 비교 고찰하였다. 또한 시편 실험에서 파괴 시까지 실험하여 그 형상도 살펴보았으며 이전 연구와도 비교하여 보았다.

• Steel and Composite Structures
• /
• 제8권3호
• /
• pp.179-200
• /
• 2008

This paper reports the results of a recent experimental study into the behavior of welded fin-plate connections to both hollow and concrete filled tubular (CFT) columns under shear. Experiments have been performed at both ambient and elevated temperatures with the aid of an electric kiln. The observed failure modes include fracture of the fin plate and tearing out of the tube around the welds. By considering the results of previously published research, the current design method for similar connections under purely tensile load, in CIDECT Guide 9, based on a deformation limit of 3% of the tube width is shown to be inadequate when evaluating the ultimate strength of such connections. By comparing the results from the current test program which failed in the fin-plate with Eurocode guidance for failure of a fin-plate alone under shear and bending load it is shown that the column face influences the overall connection strength regardless of failure mode. Concrete in-fill is observed to significantly increase the strength of connections over empty specimens, and circular column specimens were observed to exhibit greater strength than similarly proportioned square columns. A finite element (F.E.) model, developed using ABAQUS, is presented and validated against the experimental results in order that extensive parametric tests may be subsequently performed. When validating the model against elevated temperature tests it was found that using reduction factors suggested in published research for the specific steel grades improved results over applying the generic Eurocode elevated temperature steel strength reduction factors.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2006년도 특별논문집
• /
• pp.97-105
• /
• 2006

Until now, we are designing the breakwater of container vessel as cantilever structure ypically. Recently, we have designed "side shell touch type breakwater" for the first time to 6,200TEU Class Container Carrier registered on Lloyd Classification. The Lloyd Rule does not provide requirements for breakwater scantling but only recommend breakwater wave load and Lloyd Class requests for submitting the calculation results. At early design step, we had reviewed the breakwater structure through the calculation of simple beam theory with wave load recommended by Lloyd and referring to already built same size of container vessel. At the same time we had carried out F.E.M analysis of breakwater structure and had updated design, so we could verify the strength of side shell touch type breakwater at final step.

• 동력기계공학회지
• /
• 제18권1호
• /
• pp.32-37
• /
• 2014

In this study, the optimum design process of an indoor package air-conditioner (PAC) was implemented by Taguchi method. The goal of this study is to obtain the best set condition of each control factor composing of an indoor PAC. The number of revolution of a double inlet sirocco fan installed in an indoor PAC was measured by the orthogonal array of $L_{18}(2^3{\times}3^4)$ and analysed by using the-smaller- the-better characteristic among the static characteristic analyses. As a result, the optimum condition of an indoor PAC was found as a set of when the cost of production, assembling and working conditions were considered. Moreover, the number of revolution of a double-inlet sirocco fan used for an optimum condition was reduced about 8.5% more than that of a standard condition for the target flowrate of $18.5m^3/min$.

• Advances in aircraft and spacecraft science
• /
• 제6권6호
• /
• pp.479-495
• /
• 2019

Periodic cellular core structures included in sandwich panels possess good stiffness while saving weight and only lately their potential to act as passive vibration filters is increasingly being studied. Classical homogeneous honeycombs show poor vibracoustic performance and only by varying certain geometrical features, a shift and/or variation in bandgap frequency range occurs. This work aims to investigate the vibration filtering properties of the AUXHEX "hybrid" core, which is a cellular structure containing cells of different shapes. Numerical simulations are carried out using two different approaches. The first technique used is the harmonic analysis with commercially available software, and the second one, which has been proved to be computationally more efficient, consists in the Wave Finite Element Method (WFEM), which still makes use of finite elements (FEM) packages, but instead of working with large models, it exploits the periodicity of the structure by analysing only the unit cell, thanks to the Floquet-Bloch theorem. Both techniques allow to produce graphs such as frequency response plots (FRF's) and dispersion curves, which are powerful tools used to identify the spectral bandgap signature of the considered structure. The hybrid cellular core pattern AUXHEX is analysed and results are discussed, focusing the investigation on the possible spectral bandgap signature heritage that a hybrid core experiences from their "parents" homogeneous cell cores.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.438-441
• /
• 1999

One of the most important aspect in developing High-Tc Superconducting Synchronous Motor is producing high-Tc superconducting tapes that withstand the amount of currents that is needed to run the motor with stability. The purpose of this paper is to find the magnetic field distribution inside the motor in order to find out if the high-Tc superconducting tapes operate stably in actual motor operation. With this goal, magnetic field distribution in a detailed model of the actual motor was analyzed through F.E.M. By analyzing the field distribution acquired through the computer simulation, it has been observed whether the high-Tc superconducting tape maintains its superconductivity in actual motor operation. Also, the effects of the flux damper on the motor's operational characteristics and the magnetic field distribution have been analyzed. As a result, it has been proved that the high-Tc superconducting tapes can withstand 600 A turns which is required by the previous simulation aimed at developing this motor. It has also seen that the flux damper reduces armature reactance during the motor operation and change of load, helping the stable motor operation.

• Journal of Microbiology and Biotechnology
• /
• 제14권4호
• /
• pp.836-843
• /
• 2004

Nontypeable H. influenzae (NTHi), a Gram-negative obligate human pathogen, causes pneumonia, chronic bronchitis, and otitis media, and the respiratory epithelium is the first line of defense that copes with the pathogen. In an effort to identify transcriptional responses of human respiratory epithelial cells to infection with NTHi, we examined its differential gene expression using high density cDNA microarrays. BEAS-2B human bronchial epithelial cells were exposed to NTHi for 3 hand 24 h, and the alteration of mRNA expression was analyzed using microarrays consisting of 8,170 human cDNA clones. The results indicated that approximately 2.6% of the genes present on the microarrays increased in expression over 2-fold and 3.8% of the genes decreased during the 24-h infection period. Upregulated genes included cytokines (granulocyte-macrophage colony stimulating factor 2, granulocyte chemotactic protein 2, IL-6, IL-10, IL-8), transcription factors (Kruppel-like factor 7, CCAAT/enhancer binding protein $\beta$, E2F-1, NF-$\kappa$B, cell surface molecules (CD74, ICAM-1, ICAM-2, HLA class I), as well as those involved in signal transduction and cellular transport. Selected genes were further confirmed by reverse-transcription-PCR. These data expand our knowledge of host cellular responses during NTHi infection and should provide a molecular basis for the study of host-NTHi interaction.

• Journal of Welding and Joining
• /
• 제1권1호
• /
• pp.37-46
• /
• 1983

This paper describes a study of fillet welded joint stressed perpendicular to the weld line. The finite element method was used to determine the stress intensity factor for cruciform joint at weld toe and root cracks according to variation of H/Tp, weld angle and main plate thickness. But, in this study, weld angle was fixed at 45.deg., since the variation of weld angle affect the stress intensity factor little, also main plate thickness was fixed. Pulsating tension fatigue test was done at the second phase of experiment. The work using the concepts of the fracture mechanics on the stable crack growth, was in the correlation of the experimental fatigue stress-life behavior because the fatigue behaviors of various joint geometries are related to the stress intensity factors calculated by F.E.M. analysis. Main results obtained are summarized as follows. 1) According to the propagation of toe crack, the variation of the stress intensity factor at root crack is obvious as H/Tp is smaller. 2) According to the propagation of root cracks, the change of the stress intensity factor of the toe is very large with propagation of root crack. 3) The calculation formula of the stress intensity factor of crack propagation at the root crack was obtained. 4) The calculation formula of the stress intensity factor at the toe cracks was obtained in similar manner. 5) From the results of experiment, the velocity of fatigue crack propagation at the weld toe and root was estimated.