• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.568-572
• /
• 2001

An industrial vibratory conveyor system is devised for large-scale feeding by the low-power, using natural frequency of the system. The important thing in this system is to determine the natural frequency and to drive by it. The purpose of this study is to build up reliance on the system with changing of element parameters for vibration characteristics of balancing type vibratory conveyor by using F.E.M. modeling. For investigating the natural frequency, modal testing is performed by using impact hammer, accelerometer and LMS/Vibration Analysis System. Experimental results are compared with F.E.M results. The results of the comparisons within the errors of less than 2 percent can verify the reliability of the F.E.M. analysis of the system. Also we can verify that the characteristics of natural frequency have linearly decreased(-6%) as adding the mass($50{\sim}600kg$). We can find that controlling driving frequency is necessary for triggering the natural frequency, but natural frequency is less affected by adding the mass on the balancing weight.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1994.06a
• /
• pp.163-172
• /
• 1994

The Aerospace and automobile industries have need to avoid sheet-metal forming problem such as incorrect springback after forming and trimming process, excessive thinning/tearing, wrinking/perkering. It is common practice to use costly trial-and-error experimental methods to develop tooling and manufacturing process parameters. Experimentation should be complemented with computer simulation to reduce cost and leadtime in manufacturing and to influence the design of components. In this study, firstly we solved the springback problem after drawing and trimming process of KFP(F100-229) engine airsealing bearing support part(53H00) forming and studied on the effect of several process parameters on the gap between the formed blank and punch shape using the implicit F.E.M code(ABAQUS). Secondly by the three dimensional dynamic analysis using the explicit. F. E. M code (LS-DYNA3D), we studied on the effect of several process parameters which can be used for avoid tearing and wrinking during the drawing process.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.591-593
• /
• 2005

This paper presents the dynamic analysis of a humanoid robot using Nastran that is one of FEM analysis program. Generally, computer program based on the Lagrange-Euler method or Newton-Euler method was used for dynamic analysis of a robot. The Lagrange-Euler method requires much calculation performance and it is also hard to apply to complex structure, and the Newton-Euler method limits accurate modeling and calculation for closed structure like a humanoid robot. In this paper, mechanical and structural data are obtained from the Nastran. It is possible for Nastran to make model similar to real system and can apply a physical properties and laws to model. So, accurate simulation is possible. From this result, accurate data is gained by Nastran. Furthermore, this method is shown to be a useful method that guarantees accuracy for trajectory planning.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.25 no.1
• /
• pp.33-46
• /
• 1988

This paper describes a simplified method for estimation of the ultimate compressive strength of actual ship panels with initial deflection of complex shape. The proposed method consists of the elastic analysis using the large deflection theory and the rigid-plastic analysis based on the collapse mechanism which also includes the large deformation effect. In order to reduce the computing time for the elastic large deflection theory and the rigid-plastic analysis based on the collapse mechanism which also includes the large deformation effect. In order to reduce the computing time for the elastic large deflection analysis, only one term of Fourier series for the plate deflection is considered. The results of the proposed method are in good agreement with those calculated by the elasto-plastic large deflection analysis using F.E.M. and the computing time of the proposed method is extremely short compared with that of F.E.M.

• Applied Biological Chemistry
• /
• v.32 no.2
• /
• pp.170-177
• /
• 1989

In order to seek the molecular basis of higher insecticidal activity of the carbamates with two methyl groups, m-xylyl-N-methylcarbamate(MXNMC) than the corresponding unsubstituted phenyl N-methylcarbamate(PNMC), these two derivatives have been studied by molecular orbital(MO) theoretically using extended $H\ddot{u}ckel$ theory(EHT), and analysis of regression and linear free energy relationship(LFER). The most stable stereo structure(Z, Z) shows that the phenyl group occupies vertical(${\theta}=90^{\circ}$) position on the plane of the N-methylcarbamyl group. Regression analysis shows that especially good correlation exists between the $pI_{50}$ values and the calculated MO quantities when the hydrogen atomic charge of metaposition and of m-methyl groups, and LUMO energy are taken as variables. The LFER analysis on the carbamylation indicates that field(F) effect(60%) is slightly larger than resonance(R) effect(40%) in PNMC(E>R), whereas, in case of MXNMC, R effect(98.6%) is much larger than F effect(1.4%)($R{\gg}F$). From the basis on the findings, the enhancement of insecticidal activity of MXNMC may be the result of hyperconjugation by m-methyl groups.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.2
• /
• pp.109-114
• /
• 2000

The relation between the phase-shift profile fur the intermediate frequencies and the Langmuir adsorption isotherm at the poly-Ir/0.1 M $H_2SO_4$ aqueous electrolyte interface has been studied using ac impedance measurements, i.e., the phase-shift methods. The simplified interfacial equivalent circuit consists of the serial connection of the electrolyte resistance $(R_s)$, the faradaic resistance $(R_F)$, and the equivalent circuit element $(C_P)$ of the adsorption pseudoca-pacitance $(C_\phi)$. The comparison of the change rates of the $\Delta(-\phi)/{\Delta}E\;and\;\Delta{\theta}/{\Delta}E$ are represented. The delayed phase shift $(\phi)$ depends on both the cathode potential (E) and frequency (f), and is given by $\phi=tan^{-1}[1/2{\pi}f(R_s+R_F)C_P]$. The phase-shift profile $(-\phi\;vs.\;E)$ for the intermediate frequency (ca. 1 Hz) can be used as an experimental method to determine the Langmuir adsorption isotherm $(\theta\;vs.\;E)$. The equilibrium constant (K) for H adsorption and the standard free energy $({\Delta}G_{ads})$ of H adsorption at the poly-Ir/0.1 M $H_2SO_4$ electrolyte interface are $2.0\times10^{-4}$ and 21.1kJ/mol, respectively. The H adsorption is attributed to the over-potentially deposited hydrogen (OPD H).

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.04a
• /
• pp.42-47
• /
• 1997

In this study, the drawing characteristics of circular drawbead are examined with the plane strain elastic-plastic FE Method by varying the process variables such as friction coefficient, drawbead radius, and closing depth. Numerical analysis are carried out by 2-D elastic-plastic F.E.M. The results are compared with the existing experimental results about the drawing force, the die clamping force, and the strain distribution of upper and lower sheet faces

• 전기의세계
• /
• v.16 no.1
• /
• pp.14-18
• /
• 1967

To analyze th frequency modulation system the characteristic equation of the F-M system, i.e., Mathieu's equation, is derived from the equivalent circuits of direct modulation system. The analysis of F-M equation is undertaken by the Yonsei 101 Analog Computer. And the computer solution is compared with the theoretical solution. It is concluded that not only the frequency but also the amplitude of the carrier wave are changed by varying the modulation index and the system becomes unstable if the modulation index is increased near to unity.

• Journal of Korean Society of Forest Science
• /
• v.73 no.1
• /
• pp.9-13
• /
• 1986

Karyotypes are described for Juniperus rigida Sieb. et zucc, in two provenances of Gyeong-nam and Choong-puk. Chromosome numbers of two provenances, are 2n=22. The most common feature of mitotic chromosomes was shown at the chromosome 7, which has secondary constriction on the short arm. And the most differential chromosome was shown at chromosome 9 from Gyeong-nam and chromosome 5 from Choong-puk provenance which bore secondary constriction. The karyotype formulae are as follows; Gyeong-nam, Jinyang provenance race is $$K(2n)=22=2A^m+2B^m+2C^m+2D^{sm}+2E^{st}+2F^m+2^{sc}G^m+2H^m+2^{sc}I^t+2J^{st}+2K^m$$ Choong-puk, Jechun provenance race is $$K(2n)=22=2A^m+2B^m+2C^m+2D^{st}+2^{sc}E^{sm}+2F^m+2^{sc}G^m+2H^m+2I^m+2J^{st}+2K^{sm}$$.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.11
• /
• pp.539-545
• /
• 2001

A simple analysis method for inverter-fed induction motor using F.E.M and harmonic equivalent circuit is proposed. And an optimum shape of rotor slot for 2Hp inverter-fed induction motor is determined by combining the proposed analysis method and an optimization algorithm. Conjugate gradient method is used for the optimization algorithm. The optimization is performed for higher efficiency and reduction of harmonic loss in the inverter-fed induction motor. The optimization results are verified by comparing with those of the time-step F.E.A.