• Title/Summary/Keyword: F-wave

Search Result 613, Processing Time 0.027 seconds

확장된 slip-weakening 모델의 응력 강하량과 에너지 수지 특성 및 스케일링 관계 (Characteristics of Stress Drop and Energy Budget from Extended Slip-Weakening Model and Scaling Relationships)

  • 최항;윤병익
    • 한국지진공학회논문집
    • /
    • 제24권6호
    • /
    • pp.253-266
    • /
    • 2020
  • The extended slip-weakening model was investigated by using a compiled set of source-spectrum-related parameters, i.e. seismic moment Mo, S-wave velocity Vs, corner-frequency fc, and source-controlled high-cut frequency fmax, for 113 shallow crustal earthquakes (focal depth less than 25 km, MW 3.0~7.5) that occurred in Japan from 1987 to 2016. The investigation was focused on the characteristics of stress drop, radiation energy-to-seismic moment ratio, radiation efficiency, and fracture energy release rate, Gc. The scaling relationships of those source parameters were also investigated and compared with those in previous studies, which were based on generally used singular models with the dimensionless numbers corresponding to fc given by Brune and Madariaga. The results showed that the stress drop from the singular model with Madariaga's dimensionless number was equivalent to the breakdown stress drop, as well as Brune's effective stress, rather than to static stress drop as has been usually assumed. The scale dependence of stress drop showed a different tendency in accordance with the size category of the earthquakes, which may be divided into small-moderate earthquakes and moderate-large earthquakes by comparing to Mo = 1017~1018 Nm. The scale dependence was quite similar to that shown by Kanamori and Rivera. The scale dependence was not because of a poor dynamic range of recorded signals or missing data as asserted by Ide and Beroza, but rather it was because of the scale dependent Vr-induced local similarity of spectrum as shown in a previous study by the authors. The energy release rate Gc with respect to breakdown distance Dc from the extended slip-weakening model coincided with that given by Ellsworth and Beroza in a study on the rupture nucleation phase; and the empirical relationship given by Abercrombie and Rice can represent the results from the extended slip-weakening model, the results from laboratory stick-slip experiments by Ohnaka, and the results given by Ellsworth and Beroza simultaneously. Also the energy flux into the breakdown zone was well correlated with the breakdown stress drop, ${\tilde{e}}$ and peak slip velocity of the fault faces. Consequently, the investigation results indicate the appropriateness of the extended slip-weakening model.

식물공장 자동화를 위한 공압 실린더를 이용한 육묘베드 이송장치의 이송력 특성 (Transfer Force Characteristics of Seedling Bed Transfer Equipment Using Pneumatic Cylinder for Automation of Plant Factory)

  • 민영봉;박상민;이공인;김동억;강동현;문성동
    • Journal of Biosystems Engineering
    • /
    • 제37권3호
    • /
    • pp.155-165
    • /
    • 2012
  • This study was performed to offer the data for design of the seedling bed transfer equipment to make the automation of working process in a plant factory. The seedling bed transfer equipment pushing the seedling bed with bearing wheels on the rail for interconnecting each working process by a pneumatic cylinder was made and examined. The examined transfer force to push the seedling bed with a weight of 178.9 N by the pneumatic cylinder with length of 60 cm and section area of 5 $cm^2$ was measured by experiments. The examined transfer forces was compared with theoretical ones calculated by the theoretical formula derived from dynamic system analysis according to the number of the seedling bed and pushing speed of the pneumatic cylinder head at no load. The transfer function of the equipment with the input variable as the pushing speed $V_{h0}$(m/s) and the output variable as the transfer force f(t)(N) was represented as $F(s)=(V_{h0}/k)(s+B/M)/(s(s^2+Bs/M+1/(kM))$ where M(kg), k(m/N) and B(Ns/m) are the mass of the bed, the compression coefficient of the pneumatic cylinder and the dynamic friction coefficient between the seedling bed and the rail, respectively. The examined transfer force curves and the theoretical ones were represented similar wave forms as to use the theoretical formular to design the device for the seedling bed transfer. The condition of no vibration of the transfer force curve was $kB^2>4M$. The condition of transferring the bed by the repeatable impact and vibration force according to difference of transfer distance of the pneumatic cylinder head from that of the bed was as $Ce^{-\frac{3{\pi}D}{2\omega}}<-1$, where ${\omega}=\sqrt{\frac{1}{kM}-\frac{B^2}{4M^2}}$, $C=\{\frac{\frac{B}{2M}-\frac{1}{kB}}{\omega}\}$, $D=\frac{B}{2M}$. The examined mean peak transfer force represented 4 times of the stead state transfer force. Therefore it seemed that the transfer force of the pneumatic cylinder required for design of the push device was 4Bv where v is the pushing speed.

집중형 소자를 이용한 공진 주파수 및 입력 임피던스 선택형 다중 대역 튜너블 안테나 (Frequency and Input Impedance Selective Antenna Using Lumped Element for Multi-band Handhold Terminals)

  • 정병운
    • 한국ITS학회 논문지
    • /
    • 제7권2호
    • /
    • pp.50-55
    • /
    • 2008
  • 본 논문에서는 단락점과 접지면 사이에 집중형 소자인 인덕터를 이용하여 안테나의 입력 임피던스와 공진주파수 모두를 선택 가능한 다중 대역 내장형 안테나를 제안하였다. 제안된 안테나의 구조는 PIFA (Planar Inverted F Antenna)구조와 반파장 로디드 라인 구조의 합성으로 전체적으로 두 개의 단락점과 하나의 급전점을 가지며 그 중 하나의 단락점을 공유한다. 설계된 안테나의 동작 주파수 대역은 PIFA 구조에서 GSM ($880\;{\sim}\;960MHz$), GPS ($1575{\pm}10MHz$)이며 반파장 로디드 라인 구조에서의 인덕터의 값을 2.2nH, 3.3nH, 4.7nH로 변화시킴에 따라 제안된 안테나는 DCS ($1710{\sim}1880MHz$), US-PCS ($1850{\sim}1990MHz$), 그리고 W-CDMA ($1920{\sim}2170MHz$) 대역에서 동작한다. 공유된 단락점에서의 인덕터 값을 1.2nH, 3.9nH, 6.8nH로 변화시킴으로서 안테나의 입력 임피던스를 변화시켰으며 집중형 소자의 추가로 생기는 안테나의 이득 변화를 최소화하기 위해 사용되는 인덕터의 값을 최대 6.8nH로 제한하였다. 제안된 안테나의 최대 이득은 GSM 대역에서 1.60dBi, GPS 대역에서 -1.16dBi DCS/US-PCS/W-CDMA 대역에서 1.41dBi로 측정되었다.

  • PDF

수내 척수병증에서 자기운동유발전위 지표의 진단적 가치 (Diagnostic Value of Magnetic Motor Evoked Potential Parameters in Intramedullary Myelopathy)

  • 서상혁;김용범;문희수;정필욱;안재영;배종석;김민기;신경진;김병준
    • Annals of Clinical Neurophysiology
    • /
    • 제8권1호
    • /
    • pp.29-35
    • /
    • 2006
  • Background: Transcranial magnetic stimulation (TMS) is a non-invasive diagnostic method particularly suited to investigation the long motor tracts. The clinical value of TMS in most spinal cord diseases has still to be made. Diagnostic value of magnetic motor evoked potential (MEP) parameters in intramedullary spinal cord lesions was investigated. Methods: MEP elicited by TMS was recorded in 57 patients with clinically and radiologically defined intramedullary myelopathy. Twenty five patients with cervical myelopathy (CM) and 32 thoracic myelopathy (TM) were included. Recordings were performed during resting and minimal voluntary contraction at both abductor pollicis brevis (APB) and tibialis anterior (TA) muscles. Stimulation threshold(ST), amplitude, and central motor conduction time (CCT) were measured at resting and facilitated conditions. CCT was calculated by two means; central motor latency (CML)-M using magnetic transcranial and root stimulation, and CML-F using electrical F-wave study. The results were compared between patient groups and 10 normal control group. Results: Facilitated mean ST recorded at TA was elevated in both CM and TM compared with control group. Resting mean CML-M at TA was significantly prolonged in both CM and TM, and CML-M was absent or delayed in 37.1% of CM and 8% of TM at APB with facilitation. Facilitated mean MEP amplitude at ABP was lower in CM than in TM, while MEP/M ratios were not different significantly between groups. Conclusions: Magnetic motor evoked potential has diagnostic value in intramedullary myelopathy and localizing value in differentiating between CM and TM by recording at APB and TA. It is a noninvasive way to investigate the functional status of motor tracts of spinal cord.

  • PDF

서해연안 상세해상을 통한 천해조석 및 조석비대칭 재현 (Reproduction of Shallow Tides and Tidal Asymmetry by Using Finely Resolved Grid on the West Coast of Korea)

  • 서승원
    • 한국해안·해양공학회논문집
    • /
    • 제23권4호
    • /
    • pp.313-325
    • /
    • 2011
  • 황해 조석모의를 위한 유한요소 격자체계가 h-상세화에 의해 구축되어 이전연구(서, 1999b) 14 K 절점에 비해 210 K로 연안지역 해상이 특별하게 고려되었다. 격자생성시 인접절점간 수심변화, 무차원 조석파장비가 고려되어 전체절점의 약 1/4이 수심 5 m 내외 연안역에 집중적으로 분포되었다. 수심에 ETOPO1 및 30초 정밀자료가 적용되었고 개방경계에 FES2004로부터 자동추출된 8대분조가 정의되었다. 조석모의에는 비선형 3차원 조화모형이 수립되었으며, 연직난류와 바닥마찰계수의 변화에 따른 서해연안의 조석확폭이 모의되었고, 8대분조 및 $M_4,$ $MS_4$ 등 비선형 천해조석과 $M_f$$M_{sf}$의 장주기 등이 재현되었다. 천문조뿐만 아니라 비선형 항의 반복에 의해 계산되는 천해조 해석결과에 마찰계수의 공간적변화가 미치는 영향이 지대하여, 조석 주기별로 다른 값을 적용하는 것이 제시되었다. 조석 비대칭성 분포를 파악하고자 진폭비 $M_4/M_2$와 위상차 $2g(M_2)-g(M_4)$를 계산하였는데, 우리나라 서해연안에 조석왜곡 비율이 0.2에 다다르는 등 천해역 특성이 뚜렷하며 목포해역 전면에 폭넓은 낙조우세가 재현되었다.

이식형 마이크로폰과 진동체를 갖는 인공중이의 이득 보상을 위한 주파수 특성 고찰 (Study on frequency response of implantable microphone and vibrating transducer for the gain compensation of implantable middle ear hearing aid)

  • 정의성;성기웅;임형규;이장우;김동욱;이정현;김명남;조진호
    • 센서학회지
    • /
    • 제19권5호
    • /
    • pp.361-368
    • /
    • 2010
  • ACROSS device, which is composed of an implantable microphone, a signal processor, and a vibrating transducer, is a fullyimplantable middle ear hearing device(F-IMEHD) for the recovery of patients with hearing loss. And since a microphone is implanted under skin and tissue at the temporal bones, the amplitude of the sound wave is attenuated by absorption and scattering. And the vibrating transducer attached to the ossicular chain caused also the different displacement from characteristic of the stapes. For the gain control of auditory signals, most of implantable hearing devices with the digital audio signal processor still apply to fitting rules of conventional hearing aid without regard to the effect of the implanted microphone and the vibrating transducer. So it should be taken into account the effect of the implantable microphone and the vibrating transducer to use the conventional audio fitting rule. The aim of this study was to measure gain characteristics caused by the implanted microphone and the vibrating transducer attached to the ossicle chains for the gain compensation of ACROSS device. Differential floating mass transducers (DFMT) of ACROSS device were clipped on four cadaver temporal bones. And after placing the DFMT on them, displacements of the ossicle chain with the DFMT operated by 1 $mA_{peak}$ current was measured using laser Doppler vibrometer. And the sensitivity of microphones under the sampled pig skin and the skin of 3 rat back were measured by stimulus of pure tones in frequency from 0.1 to 8.9 kHz. And we confirmed that the microphone implanted under skin showed poorer frequency response in the acoustic high-frequency band than it in the low- to mid- frequency band, and the resonant frequency of the stapes vibration was changed by attaching the DFMT on the incus, the displacement of the DFMT driven with 1 $mA_{rms}$ was higher by the amount of about 20 dB than that of cadaver's stapes driven by the sound presssure of 94 dB SPL in resonance frequency range.

Synthesis of Binuclear Bismacrocyclic Iron(II) Complex by the Aerobic Oxidation of Iron(II) Complex of 1,4,8,11-Tetraazacyclotetradecane

  • Myunghyun Paik Suh;Gee-Yeon Kong;Il-Soon Kim
    • Bulletin of the Korean Chemical Society
    • /
    • 제14권4호
    • /
    • pp.439-444
    • /
    • 1993
  • The aerobic oxidation of the Fe(II) complex of 1,4,8,11-tetraazacyclotetradecane, [Fe(cyclam)$(CH_3CN)_2](ClO_4)_2$, in MeCN in the presence of a few drops of $HClO_4$ leads to low spin Fe(III) species [Fe(cyclam)$(CH_3CN)_2](ClO_4)_3$. The Fe(III) cyclam complex is further oxidized in the air in the presence of a trace of water to produce the deep green binuclear bismacrocyclic Fe(II) complex $[Fe_2(C_{20}H_{36}N_8)(CH_3CN)_4](ClO_4)_4{\cdot}2CH_3CN$. The Fe(II) ions of the complex are six-coordinated and the bismacrocyclic ligand is extensively unsaturated. $[Fe_2(C_{20}H_{36}N_8)(CH_3CN)_4](ClO_4)_4{\cdot}2CH_3CN$ crystallizes in the monoclinic space group $P2_1/n$ with a= 13.099 (1) ${\AA}$, b= 10.930 (1) ${\AA}$, c= 17.859 (1) ${\AA}$, ${\beta}$= 95.315 $(7)^{\circ}$, and Z= 2. The structure was solved by heavy atom methods and refined anisotropically to R values of R= 0.0633 and $R_w$= 0.0702 for 1819 observed reflections with F > $4{\sigma}$ (F) measured with Mo K${\alpha}$ radiation on a CAD-4 diffractometer. The two macrocyclic units are coupled through the bridgehead carbons of ${\beta}$-diimitie moieties by a double bond. The double bonds in each macrocycle unit are localized. The average bond distances of $Fe(II)-N_{imine}$, $Fe(II)-N_{amine}$, and $Fe(II)-N_{MeCN}$ are 1.890 (5), 2.001 (5), and 1.925 (6) ${\AA}$, respectively. The complex is diamagnetic, containing two low spin Fe(II) ions in the molecule. The complex shows extremely intense charge transfer band in the near infrared at 868 nm with ${\varepsilon}$= 25,000 $M^{-1}cm^{-1}$. The complex shows a one-electron oxidation wave at +0.83 volts and two one-electron reduction waves at -0.43 and-0.72 volts vs. Ag/AgCl reference electrode. The complex reacts with carbon monoxide in $MeNO_2$ to form carbonyl adducts, whose $v_{CO}$ value (2010 $cm^{-1}$) indicates the ${\pi}$-accepting property of the present bismacrocyclic ligand.

착용형 시야 가리개가 집중력 향상에 미치는 영향 (Effects of a Blindfold in Improving Concentration)

  • 정순철;최미현;김형식
    • 감성과학
    • /
    • 제24권1호
    • /
    • pp.37-44
    • /
    • 2021
  • 본 논문에서는 시야의 좌측과 우측만 가리는 시야 가리개를 이용하여 주변 시야 가림에 따른 집중력 향상 효과에 대한 연구를 수행하였다. 사용한 시야 가리개는 가로와 세로 5 cm × 4.8 cm 의 사다리꼴 모양으로 안경의 좌측과 우측에 고정 클립으로 부착할 수 있도록 하였다. 재질은 검정색의 폴리프로필렌(Polyprolylene)소재를 이용하였으며 클립을 포함하여 무게는 2.3 gram이었다. 건강한 20대 대학생 50명을 대상으로 15일간 시야 가리개를 사용하도록 한 후 정성평가와 정량평가를 수행하였다. 정성평가는 집중력 향상과 시야 가리개의 구조에 대한 설문조사로 진행하였다. 정량평가를 위하여 주의력 집중이 필요한 학습 동영상을 시청하도록 하면서 뇌파를 측정하였고 전두엽(frontal lobe) 영역인 F4 위치에 대한 Mid β 밴드(15~20Hz) 신호의 파워(power)와 ERD/S 분석을 수행하였다. 분석 결과 50명 중 80%인 40명이 시야 가리개를 착용하였을 때 집중력이 향상되었다고 보고하였다. 정량평가 결과 시야 가리개를 착용하고 동영상을 시청하였을 때 ERS peak(p=.023)와 ERD+ERS peak 값이 유의(p=.017)한 차이를 나타내었다. 결론적으로 좌측과 우측의 시야 가리개만을 사용하여도 집중력이 향상되는 결과를 도출하였다. 시야를 모두 가리는 덮개 형태 또는 시야의 상측과 하측을 가리지 않더라도 집중력을 향상시킬 수 있기 때문에 향후 간편한 방법으로 집중이 필요한 다양한 환경에서 활용이 가능할 것으로 기대된다.

수면 거칠기에 따른 수면 경로의 시변 통신채널 통계적 특성 분석 (A study on statistical characteristics of time-varying underwater acoustic communication channel influenced by surface roughness)

  • 황인성;최강훈;최지웅
    • 한국음향학회지
    • /
    • 제42권6호
    • /
    • pp.491-499
    • /
    • 2023
  • 해수면 거칠기에 의해 해수면 산란이 발생하면 통신신호의 주파수 확산과 통신채널 시변동성을 야기하여 통신성능을 악화시킨다. 수면 거칠기에 따른 통신채널의 시변동성 차이를 비교하기 위하여 한양대학교 해양음향공학연구실 수조에서 실험을 수행하였다. 수조에서 인위적인 수면 거칠기를 생성하고 대역폭에 따른 차이를 비교하기 위하여 3가지 대역폭을 갖는 통신신호를 사용하였다. 측정된 수면 거칠기는 레일리 파라미터로 변환하여 거칠기에 대한 파라미터로써 사용하였으며, 수면 경로의 시변 채널 특성은 도플러 확산과 상관시간을 이용하여 통계적 분석을 수행하였다. 수면 경로의 도플러 확산은 통신신호의 반송 주파수와 대역폭의 영향을 보정한 가중 유효 도플러 확산(Weighted Root Mean Square Doppler spread, wfσν)을 사용하였다. 수면 경로의 상관시간과 직접 경로와 수면 경로의 에너지 비율을 이용하여 전체 채널의 상관관계를 모의하고 측정된 전체 채널의 상관시간과 비교하였다. 본 연구에서는 해수면 거칠기에 따른 해수면 경로의 시변 채널특성을 이용하여 임의의 해양환경에서 효율적인 통신신호 설계를 위한 방법을 제안한다.

MIMIC 전력증폭기에 응용 가능한 0.2 ${\mu}{\textrm}{m}$ 이하의 게이트 길이를 갖는 전력용 AlGaAs/InGaAs/GaAs PHEMT (AlGaAs/InGaAs/GaAs PHEMT power PHEMT with a 0.2 ${\mu}{\textrm}{m}$ gate length for MIMIC power amplifier.)

  • 이응호
    • 한국통신학회논문지
    • /
    • 제27권4B호
    • /
    • pp.365-371
    • /
    • 2002
  • 본 논문에서는 전자선 묘화 장비를 이용하여 게이트 길이가 0.2 $\mu\textrm{m}$ 이하인 밀리미터파용 전력 PHEMT 소자를 제작하고 DC 특성과 주파수 특성 그리고 전력 특성을 측정하고 분석하였다. PHEMT의 제작에 사용된 단위공정은 저 저항 오믹 접촉, 에어 브릿지 및 후면 가공 공정기술 등을 이용하였다. 제작된 전력용 PHEMT는 35 GHz의 중심주파수에서 4 dB의 S21 이득과 317 mS/mm의 최대 전달컨덕턴스 그리고 62 GHz의 차단주파수와 12G GHz의 최대 공진주파수를 나타내었다. 또한 측정된 전력 특성은 35.5 %의 드레인 효율과 16 dB의 최대 출력전력 그리고 4 dB의 전력 이득을 나타내었다.