• Korean Journal of Mathematics
• /
• v.5 no.2
• /
• pp.119-125
• /
• 1997

We show that there exists an isomorphism between the basic construction $(M_f)_1$ for $N_f{\subset}M_f$ and the reduction $(M_1)_f$ of the basic construction $M_1$ for $N{\subset}M$, where $f$ is a nontrivial projection in N. For a nontrivial projection $f{\in}N^{\prime}{\cap}M$ we give the basic construction $(M_f)_1$ for $N_f{\subset}M_f$ and compare it with $(M_1)_f$.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.389-390
• /
• 2008

The dependence of $f_T$ and $f_{max}$ on the unit finger width is measured and analyzed for $0.13{\mu}m$ MOSFETs. The increase of $f_T$ at narrow width is attributed by the parasitic gate-bulk capacitance, and the decrease of $f_T$ at wide width is generated by the reduction of increasing rate of $g_{mo}$. The increase of $f_{max}$ at narrow width is originated from the abrupt reduction of gate resistance due to the non-quasi-static effect. These analysis results will be valuable information for layout optimization to improve $f_T$ and $f_{max}$.

• Resources Recycling
• /
• v.19 no.6
• /
• pp.93-101
• /
• 2010

In this study, we have studied hydration properties and compressive strength of the electric arc furnace reduction slag as a cement admixture. The reduction slag is mainly consisted of 17.1% of f-CaO and rapid curing clinker minerals, 37.1% of $C_{11}A_7CaF_2$, and 21.0% of $C_3A$. When the substitution rate of the slag on OPC was 30%, the initial setting time and final setting time has been shortened from 305 min. and 425 min. to 10min. and 30min. When the substitution rate of the slag on OPC was 7%, the compressive strength of mixed cement mortars has been increased than that of OPC during all period. When the substitution rate of the slag on OPC was over 20%, the compressive strength of mortars has been reduced than that of OPC at initial and final compressive strength. As a result of hydration properties of reduction slag, $C_{11}A_7CaF_2$ transfer to $C_3AH_6$ but as the substitution rate of slag on OPC increases, increased f-CaO and the metastable hydrates $C_4AH_{13}$ increased. Therefore, we should control the substitution rate of the slag on OPC was under 7% in order to use EAF reduction slag as a cement admixture.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.546-550
• /
• 2014

Relative reactivity of various carbonyl and acid derivatives in MPV-type (Meerwein-Ponndorf-Verley) reduction with an DIBAL(F) model has been studied via DFT and MP2 methods. Free energies of initial adduct formation (-Gadd) of DIBAL(F) model and carbonyls are in the order of amide < ester < aldehyde < ketone < acid chloride; in the alan-amide adduct, the developed positive charge at carbonyl carbon is expected to be stabilized by amide resonance, but in the acid chloride adduct it is destabilized by inductive effect of chloride. However the TS barrier energies (${\Delta}G_{TS}$) for the MPV-type hydride reduction of the carbonyl adducts are in the order of aldehyde < ketone < acid chloride << ester < amide; presumably decreasing order of electrophilicity of carbonyl carbon at adducts, which is well correlated with experimental data. It is noted that the relative reactivity of carbonyl derivatives in MPV-type reduction with DIBAL(X) is not governed by the alan-adduct formation energies, but follows the order of electrophilicity of carbonyl carbon of transition states.

• The Korea Journal of Herbology
• /
• v.38 no.3
• /
• pp.11-18
• /
• 2023

Objectives : This study aimed to investigate the effect of face washing on pore changes in a controlled environment without external condition changes. The research compared the results of water washing, foam cleanser (F/C) washing, and herb cp (cold process) soap washing on pore reduction. Methods : The experiment was conducted using the same water and towel, in the same place, before and 10 minutes after washing. The skin test was performed before and after washing, and three cases of herb cp soap were tested: Ginseng, Liriope platyphylla (LP), and Castanea crenata inner shell (CCIS). A control group was established using water and F/C washing. Results : Water washing and F/C washing showed a similar degree of pore reduction. Men and individuals with complex skin types showed significantly larger pores. LP cp soap showed the greatest significance in pore reduction. Conclusion : This study found that pore shrinking effects were observed regardless of the use of facial cleansers. LP cp soap was found to be the most effective in reducing pore size. It is important to emphasize the importance of face washing for individuals with large pores and combination skin types, especially men.

• The Korean Journal of Rehabilitation Nursing
• /
• v.6 no.2
• /
• pp.248-256
• /
• 2003

Purpose: This research was for checking the effect of meridian massage on the reduction of pain and subjective symptoms of myofascial pain syndrome. Method: The method of the research was interruptive time series design. The research objects are 25 hospital workers with myofascial pain syndrome at B hospital in Busan from July 22, 2002 to August 18, 2002. SPSS Win 10.0 was used for data analysis, paired t-test and repeated measures ANOVA for hypothesis test. Result: The recipients of meridian massage felt less pain than before(F=12.587, p=.000). The recipients of meridian massage felt less often than before (F=6.705, p=.001). The recipients of meridian massage got lower score on subjective symptoms of myofascial pain than before(F=12.857, p=.000). The recipients of meridian massage had lower blood pressure than before(systolic blood pressure; t=4.697, p=.000, diastolic blood pressure; t=3.426, p=.002). The recipients of meridian massage did not get the lower number of pulse than before(t=0.33, p=.744). Conclusion: The above results show that meridian massage is effective on the reduction of pain and subjective symptoms of myofascial pain syndrome and makes stable the blood pressure. Therefore meridian massage can be apply as the effective intervention for the reduction of pain and subjective symptoms of myofascial pain syndrome.

• Speech Sciences
• /
• v.14 no.4
• /
• pp.81-98
• /
• 2007

This study aims to investigate whether shortened vowel duration conditioned by a following voiceless stop induces phonetic reduction of vowel space in English, and whether the reduction appears more in the height dimension than in the backness dimension (Lindblom, 1963; Flemming, 2005). Fifteen native speakers of American English read minimal pairs containing ten American English vowels in [bVd] and [bVt] syllables in a carrier phrase. All the subjects produced shorter vowels in the voiceless than in the voiced context. However, a reduction in vowel space and a raising of low vowels due to the shortened vowel duration were generally not found. To the contrary, the speakers tended to exhibit even more lowering of low vowels in the voiceless context, and vowel space was more commonly compressed in the backness dimension than in the height dimension. Many speakers, in particular, demonstrated fronting of the high back vowel [u] in the voiceless context. It was interpreted that due to a relatively large number of English vowels in the narrower low vowel space, the raising of low vowels may give rise to confusion in vowel contrasts, and therefore the degree of phonetic vowel reduction is restricted in that region. On the other hand, the high vowel region, being relatively spacious in English, allows a certain degree of phonetic vowel reduction in the F2 dimension. It is possible that heavy requirements for maintaining vowel contrasts may cause speakers to overachieve vowel target values, especially when faced with vowels which are difficult to distinguish due to shortened vowel duration, leading to an over-lowering of the low vowels.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.4 s.247
• /
• pp.298-305
• /
• 2006

The flow around a circular cylinder which oscillates rotationally with a relatively high forcing frequency has been investigated experimentally using flow visualization and hot-wire measurements. Dominant parameters are Reynolds number (Re), oscillation amplitude $({\theta}_A)$, and frequency ratio $F_R=f_f/f_n$, where $f_f$ is the forcing frequency and $f_n$ is the natural frequency of vortex shedding. Experiments were carried out under the conditions of $Re=4.14{\times}10^3,\;{\theta}_A={\pi}/6$, and $0{\leq}F_R{\leq}2$. The effect of frequency ratio $F_R$ on the flow structure of wake was evaluated by measuring wake velocity profile and spectral analysis of hot-wire signal. Depending on the frequency ratio $F_R$, the cylinder wake has 5 different flow regimes. The vortex formation length and vortex shedding frequency are changed significantly before and after the lock-on regime. The drag coefficient was reduced under the condition of $F_R<1.0$ and the maximum drag reduction is about 33% at $F_R=0.8$. However, the drag is increased as $F_R$ increases beyond $F_R=1.0$. This active flow control method can be effective in aerodynamic applications, if the forcing parameters are selected optimally.

• Communications of the Korean Mathematical Society
• /
• v.28 no.2
• /
• pp.297-301
• /
• 2013

When certain general single or multiple hypergeometric functions were introduced, their reduction formulas have naturally been investigated. Here, in this paper, we aim at presenting a very interesting reduction formula for the Srivastava's triple hypergeometric function $F^{(3)}[x,y,z]$ by applying the so-called Beta integral method to the Henrici's triple product formula for hypergeometric series.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.458-465
• /
• 1998

This paper presents an inverter-driven induction motor used as the traction motor for a high speed drive system that is required safety, reliability and performance and so on, In the respect of traction motor design, it is mainly showed the weight reduction inclination and characteristic investigation due to V/f driving pattern variation of inverter. Particularly, the reduction of V/f ratio pattern effects on the weight of traction motor and badly on the increase of phase current of traction motor in starting point. This method of weight reduction design have to be reached the decision with not only motor but also the consideration of inverter system because of the heat capacity, weight and material cost of inverter according to the increase of current.