• Journal of Aquaculture
• /
• v.9 no.2
• /
• pp.125-132
• /
• 1996

A study was carried out to test sex ratio of the progeny that were induced by the artificial fertilization between normal female and gynogenetic diploid eggs and sex-reversed gynogenetic diploid male sperm. Sex reversed gynogenetic diploid males were produced successfully in gynogenetic diploid female by immersion treatment with $17{\alpha}$-methyltestosterone at the concentration of 10 pub from $13.5{\pm}0.22$ mm to $57.6{\pm}5.1$ mm in total length. In $F_1$ progeny test, matings between normal females and sex-reversed gynogenetic males were not produced all female, but matings between gynogenetic diploid females and sex-reversed gynogenetic males were produced all female populations in six out of eight groups and two lots produced $96.9\%$ and $95\%$ female. These data showed that all-female populations were produced by crossing between gynogenetic diploid female and sex reversed gynogenetic diploid male.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.2
• /
• pp.88-92
• /
• 1999

The apparent density. self-separation of the electrode composite from current collector in the electrolyte solution and specific resistance of electronic conduction of the electrode composite were examined by the variation of content of conductive material such as graphitic and black carbons in $LiCoO_2$ composite electrode for lithium ion battery. Increasing the content of conductive material, the apparent density of Lico02 composite electrode was decreased and that of $LiCoO_2$ in composite electrode was only rapidly decreased compared to that of composite. $LiCoO_2$ composite electrodes containing more than 4.1 weight percent of super s black as a conductive material were seU-separated by the immersion into 1 mol/I $LiPF_6$ in propylene carbonate and diethyl carbonate (1:1 volume ratio). Specific resistances related to the electronic conduction of composite electrode were decreased by the increasing the content i)f conductive material. Specific resistance of the composite electrode including $2\~3\%w/w$ of super s black as conductive material was similar to that of $12\%w/w$ of Lonza KS6. In the range of this study, super s black as conductive material is better than Lonza KS6 on battery capacity because of apparent density of $LiCoO_2$ in electrode composite including super s black is higher than that of Lonza KS6.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.5
• /
• pp.559-564
• /
• 2013

This study was performed to determine effects of dietary inclusion of various concentrations and sources of sea tangle Laminaria japonica on growth, body composition and plasma chemistry of juvenile black porgy Acanthopagrus schlegeli. Juvenile fish (N=810; average mass=8.9 g) were distributed among twenty-seven 200 L flow-through tanks (30 fish per tank). Nine experimental diets were prepared: control (Con) without additives; sea tangle powder at 0.1%, 0.5%, 1%, 2%, 3% and 5%, (P-0.1, P-0.5, P-1, P-3 and P-5 diets, respectively); and fresh sea tangle (F-1); and 1% sea tangle extract (E-1). Each powdered additive was substituted for an eqaul amount of wheat flour, and the extract was substituted for an equal amount of water in the respective experiemtnal diets. Each diet was fed to triplicate groups of fish. Weight gain and feed conversion ratio were not affected by the experimental diets. Feed consumption by fish fed the P-1 diet was higher than that of fish fed the P-3 and P-5 diets. Moisture, crude protein, crude lipid, whole-body ash content (excluding the liver), liver moisture, and crude protein and lipid contents of fish were not affected by the experimental diets. None of the fish plasma criteria were affected by the experimental diets, with the exception of plasma glucose. In conclusion, dietary inclusion of various concentrations and sources of sea tangle did not significantly affect the growth, feed efficiency, body composition or plasma chemistry of juvenile black porgy.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.17 no.2
• /
• pp.72-77
• /
• 2013

Purpose: Whole-body PET using radiopharmaceutical is one of the imaging study methods for physiological changes of body. High specificity of the PET-CT examination is used to detect an early stages of cancer and metastatic cancer by imaging a physiological changes. During the imaging process, PET image has been characterized by a relatively low image quality due to its low sensitivity and the acquisition of random and scatter coincidences as well as patients figure. Therefore, the image quality as the changes of the acquisition times of patient weight was evaluated in this study. Materials and Methods: Thirty patients who presented to our hospital were enrolled. They were divided to normal, overweight, and obese group using BMI index, respectively. The patients with a liver disease and diabetes were excluded. $^{18}F-FDG$ was administered to the patients as 5.2 MBq per kg. After an hour from an injection, image acquisition was obtained as List mode in a part of liver in 1 bed. SNR (signal-to-noise ratio) of each groups acquisition times were confirmed from the calculated radiation counts and random fractions. The statistical significance of three groups was confirmed through one-way ANOVA test. On the basis of the counts of 2 minutes on normal group, the SNR of overweight group and obese group were compared. Results: The SNR were increased with loger aquisition time in 3 groups. In the condition of same acquisition time, the SNR had a statistical significance (P<0.05). The SNR were decreased to the normal, overweight, and obese, respectively. Liver activity had no significance difference on each group and RF had the significance differences (P<0.05). On the basis of the counts of 2 minutes on normal group, there were no statistical significance in a three minute acquisitions of overweight group and two minute acquisitions of obese group (P=0.150). Conclusion: In this study, the administrated amount of radiation dose did not adjust as the change of the patients weight. Increasing the acquisition time when the administration of the same amount of dose was able to get a good result of SNR. When the Based 2 minute on normal group, if overweight and obese case the increased acquisition time of 3 minute was able to obtain a similar SNR. On the basis of the normal group, the acquisition times of overweight and obese group were increased to 3 minutes per bed and the SNR were similar to the normal group.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.7
• /
• pp.1011-1017
• /
• 2002

Conjugated linoleic acids (CLA) have been shown to decrease body fat content of individually-housed pigs but little is known about the responses under commercial conditions. Two studies were conducted to evaluate the effect of CLA under commercial conditions using contemporary genotypes. The experimental designs were similar between the two sites. Briefly, the studies were 2${\times}$2 factorial designs with the respective factors being sex (boar and gilt) and supplemental dietary CLA (0 and 4 g/kg). The studies involved 16-20 pens of pigs with 4-5 pens of each sex${\times}$CLA group. The first study was conducted with 144 pigs in 16 pens consuming a pelleted feed for 6 weeks at Bunge Meat Industries, Corowa, NSW. In the second study, 160 pigs were obtained from a commercial source and put into 20 pens in simulated commercial conditions and fed a mash diet for 7 weeks at Medina Research Station, WA. In Study 2 some aspects of meat quality were also investigated. Data from Study 1 showed that, although CLA had no significant effect upon feed intake and daily gain, the small changes in both resulted in a reduction in (-0.10 g/g, p=0.10) feed conversion ratio (FCR). While there was no significant effect of CLA on ultrasonic backfat depths, there was a significant decrease in carcass P2 (-1.0 mm, p=0.014) and estimated carcass fat (-7 g/kg, p=0.049). In the study conducted at Medina CLA had no significant effect upon feed intake, feed:gain or most measures of back fat. The exception was that dietary CLA decreased the rate of accumulation of fat at the shoulder, particularly in gilts, resulting in a significantly lower amount of shoulder fat at slaughter (-1.3 mm, p=0.044). CLA tended to increase dressing percentage although this was not significant (+0.5%, p=0.14). Meat from CLA treated pigs tended to be darker (p=0.12) and had a higher ultimate pH (p=0.06). These data suggest that under commercial conditions dietary CLA can improve growth performance and decrease P2 in pigs of an improved genotype, particularly gilts.

• Korean Journal of Agricultural Science
• /
• v.11 no.1
• /
• pp.85-93
• /
• 1984

This research was carried out to study the seed dormancy of radishes which were used for summer vegetation. The differences of dormancy of cultivars, maternal effects, the effect of full day length to mother plants, and the effects of chemical treatments for breaking the seed dormancy were considered for this study. These results sere summarized as follows; 1. The germination percentage of 7 cultlvars sown just after harvest were as follows;SP70-:0, PS11-:37.5, GJ75-:75.5, JD127-:77.5, YH85-:81.0, M55-:96.5, and JC73-:98.0%. 2. The dormany of $F_1$ seed of radish was severe when SP70-was used for mother plant. 3. Germination behavior was different by the maturity of plants grown for seed production. The dormancy of seed harvested from immature field-grown plants sown Nov. 10 was deeper than mature plants sown Mar. 22. 4. The germination ratio of tire seed of SP70-radish was increased by treatment of full day length to tire mother plant during full period of growing or since first flowering stage, while that was 0% by treatment since yellow ripening stage. 5. GA 200 ppm+thiourea 0.2% treatment was most effective for breaking of radish seed dormancy.

• Korean Journal of Optics and Photonics
• /
• v.15 no.3
• /
• pp.193-199
• /
• 2004

We present the double resonance optical pumping(DROP) spectra in the transition 5P$_{3}$2/-4D$_{3}$2/ and 5P$_{3}$2/-4D$_{5}$ 2/ of ($^{87}$ Rb) and the frequency stabilization in the $1.5mutextrm{m}$ region using those spectra. Those spectra have high signal-to-noise ratio and narrow spectral linewidth, which is about 10 MHz. We could account fur the relative intensities of the hyperfine states of those spectra by the spontaneous emission into the other state. When the frequency of the $1.5mutextrm{m}$ laser diode was stabilized to the DROP spectrum, the frequency fluctuation was about 0.2 MHz fDr sampling time of 0.1 s and the Allan deviation(or the square root of the Allan variance) was about 1${\times}$10$^{-11}$ for averaging time of l00s.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.196-196
• /
• 2017

Oilseed crop Camelina (Camelina sativa L.) is a suitable for biodiesel production that has high adaptability under low-nutrient condition like marginal land and requires low-input cost for cultivation. Enhanced abiotic stress tolerance of Camelina is very important for oil production under the wide range of different climate. CsRCI2s (Rare Cold Inducible 2) are related proteins in various abiotic stresses that predicted to localized at plasma membrane (PM) and endoplasmic reticulum (ER). These proteins are consist of eight-family that can be divided into tail (CsRCI2D/E/F/G) and no-tail (CsRCI2A/B/E/H) type of C-terminal. However, it is still less understood the function of C-terminal tail. In this study, CsRCI2D/H genes were cloned through gateway cloning system that used pCB302-3 as destination vector. And we used agrobacterium-mediated transformation system for generation of overexpression (OX) transformants. Overexpression of target gene was confirmed using RT-PCR and segregation ratio on selection media. We analyzed physiological response in media and soil under abiotic stresses using CsRCI2D and CsRCI2H overexpression plant. To compare abiotic stresses tolerance, wild type and CsRCI2D/H OX line seeds were sown on agar plate treated with various NaCl and mannitol concentration for 7 days. In the test of growth rate under abiotic stress on media, CsRCI2H OX line showed similar to NaCl and mannitol stress. In the other hand, CsRCI2D OX line showed to be improved stress tolerance that especially increased in 200mM NaCl but was similar on mannitol media. In greenhouse, WT and CsRCI2D/H OX lines for physiological analysis and productivity under abiotic stresses were treated 100, 150, 200mM NaCl. Then it was measured various parameters such as leaf width and length, plant height, total seed weight, flower number, seed number. CsRCI2H OX line in greenhouse did not show any changes in physiological parameters but CsRCI2D OX line was improved both physiological response and productivity under NaCl stress. Among physiological parameters of CsRCI2D OX line under NaCl stress, leaf length and width were observed shorter than WT but it were slightly longer than WT in 200mM NaCl stress. Furthermore, total seed weight of CsRCI2D OX line under stress displayed to decrease than WT in normal condition, but it was gradually raised with increasing NaCl stress then more than WT relatively. These results suggested CsRCI2D might be contribute to improve abiotic stress tolerance. However, function of CsRCI2H is need to more detail study. In conclusion, overexpression of CsRCI2s family can generate various environmental stress tolerance plant and may improve crop productivity for bio-energy production.

• Journal of Preventive Medicine and Public Health
• /
• v.10 no.1
• /
• pp.34-43
• /
• 1977

This study attempts to examine the performances of Myun Health Workers-the frontline workers in the Korean rural health care delivery system. The time-activity approach was mainly utilized as a measuring tool. This study was undertaken in September 1976 with 35 Myun Health Workers at the Kang Wha County. The pretested time-activity approach sheets were filled out daily for one month by those Myun Health Workers themselves. Statistical means and variances of analysis were utilized for statistical method in comparing some activities and functions converged into time distribution Findings: 1. The workers's average working hours derived in this study is 8 hours and 48 minutes per day, which takes half an hour longer than normal schedule. 2. They spend 56% working hour for direct services, in other words, the main function, 22% for supportive function, and 22% for other activities, the unrelated health services. 3. Considering the total working hours of main function, out-center activity is far more than in-center services with the ratio of 70% to 30% respectively, which proves, therefore, that the main activity of the workers is home visiting. 4. It takes 20 minutes purely for home visiting and takes 14 minutes for transportation. 5. This research also indicates that such factors as characteristics of the health workers and myun influence in shaping the structures of the worker's function and activity: a. The workers whose working site is located in myun office spend 15% among total working hours in carring out official myun activities, which is incidentally unrelated to health services, while the health subcenter have no rooms for administrative jobs for myun office. b. The workers whose office is in health subcenter contribute much time in doing main function and those working in special project distribute more time in performing supportive function. c. The types of workers are another dominant factor to influence the components of worker's functions and activities. MCH workers and MPW I spend much time for manipulating main function. d. MPW II, whose function is reorganized by special project in 2 myuns shows different pattern of time distribution compared to the TB worker orFP worker in the ordinary area. MPW II distributes their time evenly in performing MCH program, T.B. Program, F.P. program and education activity, while the unipurpose workers engage in carring out only their dominant role. e. Another variables which involve the variation of the worker's activity can be illustrated with the variables like target population, size of myun and convenience for transportation, among which the latter two are remarkable factors in determining the time for out-center service.

• Journal of the Korean Society of Tobacco Science
• /
• v.20 no.1
• /
• pp.131-138
• /
• 1998

In order to minimize the trial frequency in the new filter cigarette design, we studied the relationship between smoke yield and tipping materials of cigarette. A three levels full factorial design involving filament denier (X1,2.5-3.3d), Porosity of the acetate filter plug wrap (X2, 3,500-16,000CU) and porosity of the tip paper (X3, 400-1,200CU) was used. Three independent factors (Xl, X2, X3) were chosen for their effects on the various responses and the function was expressed in terms of a quadratic polynomial equation, Y : $\beta$o + $\beta$1Xl + $\beta$2X2 + $\beta$3X3 + $\beta$11Xl2 + $\beta$22X22+ $\beta$33X32 + $\beta$12X1X2 + $\beta$13XIX3 $\beta$23X2X3 which measures the linear, quadratic, and interaction effects. Twenty-nine trial numbers were obtained as a results of using a three levels full factorial design and it was analyzed by the multiple regression analysis with backward stepwise in STATISTICA/pc under restricted conditions. Tar yields of the cigarette was affected by porosity of tip paper (0.66), filament denier (0.47) and porosity of plug wrap (0.28) in the decreasing order, and linear effect of tip paper porosity (B3) and filament denier (91) were significant at a level of 0.01($\alpha$). The filament denier and tipping paper porosity interaction F ratio among three factors had a P-value of 0,000041, indicating higher interaction between these factors. Based on the analysis of variance, the model fitted for Tar (Y1) was significant at 5% confidence level and the coefficient of determination (0.96) was the proportion of variability in the data fitted for by the model.