• 제목/요약/키워드: F-ratio

검색결과 3,555건 처리시간 0.036초

산림(山林)의 입지환경인자(立地環境因子)가 표층토양(表層土壤)의 조공극률(組孔隙率)에 미치는 영향인자(影響因子) 분석(分析) (III) - 혼효임(混淆林)을 중심(中心)으로 - (Analysis of the Factors Influencing the Mesopore Ratio on the Soil Surface to Investigate the Site Factors in a Forest Stand (III) - With a Special Reference to Mixed Stands -)

  • 박재현;정용호;김경하;윤호중
    • 한국산림과학회지
    • /
    • 제90권6호
    • /
    • pp.683-691
    • /
    • 2001
  • 산림의 수원함양기능 지표로서 표층토양에서의 조공극률(組孔隙率)(pF2.7)에 영향하는 인자를 밝히기 위해 1995년 3월부터 10월까지 전국의 활엽수림 표본조사구를 대상으로 입지, 토양, 임분환경인자 등 총 24종에 대하여 spss/pc+를 이용하여 상관 분석하였다. 표층토양에서의 조공극률에 영향을 미치는 인자는 B층 토양에서의 조공극률, 하층식생 피복도, 표층 토양의 유기물함량비, F층 두께 등 4개 인자가 유의한 정(正)의 상관관계를, 표층토양의 견밀도, 10cm 깊이의 토양견밀도가 각각 5%, 1% 수준에서 유의한 부(負)의 상관관계를 나타내었다. Stepwise를 이용한 다중회귀분석결과 산림의 수원함양기능 증대에 영향하는 표층토양에서의 조공극률에 영향하는 인자는 B층 토양에서의 조공극률, 유기물함량비 등 2개 인자이었다.

  • PDF

아치형상의 하현재를 갖는 CFT 트러스 거더의 구조성능 평가 (Evaluation of Structural Performance in CFT Truss Girder with the Arch-Shaped Lower Chord)

  • 정철헌;송나영;마향욱;오현철
    • 대한토목학회논문집
    • /
    • 제29권4A호
    • /
    • pp.315-327
    • /
    • 2009
  • 본 연구에서는 f/L비가 CFT 트러스 거더의 극한강도에 미치는 영향을 평가하기 위하여 CFT 트러스 거더의 정적실험을 수행하였다. f/L비가 다른 2개의 CFT 트러스 거더를 제작하여 휨 실험을 수행하였다. CFT 트러스 거더의 지간은 20,000 mm이고, 상현재와 하현재는 콘크리트를 충전한 원형 강관 단면으로 구성되었다. 주요 실험변수인 f/L비가 극한강도와 강성에 미치는 영향을 평가하기 위하여 실험적 연구를 수행하였다. 실험결과, CFT 트러스 거더는 우수한 탄소성 특성과 연성능력을 보였고, f/L비는 CFT 트러스 거더의 전체 강성을 증가시켜 극한강도에 영향을 주는 것으로 나타났다. CFT 트러스 거더의 f/L비가 증가하면 극한강도가 증가하는데 f/L비가 2배 증가하면 극한강도는 약 80% 정도 증가하였다. 또한, CFT 트러스 거더는 극한강도에 도달한 이후에도 상당한 수준의 변형능력을 보여 주었다. 이상의 연구결과를 통해서 CFT 트러스 거더는 교량의 거더 부재로 효율적으로 적용 가능함을 확인하였다.

J-적분과 균열선단개구변위에 관한 구속계수 m의 평가 (An Estimation of Constraint Factor on the ${\delta}_t$ Relationship)

  • 장석기
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제24권6호
    • /
    • pp.24-33
    • /
    • 2000
  • This paper investigates the relationship between J-integral and crack tip opening displacement, ${\delta}_t$ using Gordens results of numerical analysis. Estimation were carried out for several strength levels such as ultimate, flow, yield, ultimate-flow, flow-yield stress to determine the influence of strain hardening and the ratio of crack length to width on the $J-{\delta}_t$ relationship. It was found that for SE(B) specimens, the $J-{\delta}_t$ relationship can be applied to relate J to ${\delta}_t$ as follows $J=m_j{\times}{\sigma}_i{\times}{\delta}_t$ where $m_j=1.27773+0.8307({\alpha}/W)$, ${\sigma}_i:{\sigma}_U$, ${\sigma}_{U-F}={\frac{1}{2}} ({\sigma}_U+{\sigma}_F$), ${\sigma}_F$, ${\sigma}_F}$ $Y=({\sigma}_F+{\sigma}_Y)$, ${\sigma}_Y$

  • PDF

착과 정도가'부유'단감 유목의 질소화합물 분배와 축적 및 재이용에 미치는 영향 (Effect of Various Fruit-loads on Nitrogen Partitioning, Accumulation, and Remobilization in Young Trees of 'Fuyu' Persimmon)

  • 박수정;김영기
    • 농업생명과학연구
    • /
    • 제45권5호
    • /
    • pp.57-62
    • /
    • 2011
  • 본 연구는 착과 정도에 따른 '부유' 감나무(Diospyros kaki cv. Fuyu)의 수체 부위별 질소화합물 분배와 저장양분의 축적 정도를 밝히고, 이들이 다음해 새로운 생장에 재이용되는 관계를 구명하였다. 6월 15일에 엽과비가 10, 20, 30이 되도록 착과량을 조절하였고, 일부는 모든 과실을 완전히 제거하였다. 6월 15일부터 11월 1일까지 증가한 총 아미노산은 제과수에서 가장 많았고, 엽과비가 높을수록 증가하였다. 뿌리는 엽과비 10에서 당년 아미노산의 증가가 없었다. 증가한 총 아미노산이 뿌리로 분배된 비율은 엽과비 20에서 64%, 엽과비 30에서 18.5%, 제과수에서 81%였다. 과실로 분배된 비율은 엽과비 10에서 81%, 엽과비 20에서 12%, 엽과비 30에서 35%였다. 당년 착과량이 많은 엽과비 10의 잎에서 아미노산이 감소하였다. 이 기간 동안 증가한 총 단백질은 엽과비가 높을수록 증가하였다. 당년에 증가한 단백질은 과실로 가장 많이 분배하였고, 엽과비가 낮을수록 영구기관으로 분배되는 양이 감소하였다. 엽과비 30에서는 당년에 증가한 총 단백질이 과실로 59%, 뿌리로 40% 분배하였다. 당년 엽과비 10과 20의 잎에서 단백질이 감소하였다. 이듬해 4월 10일부터 6월 10일까지 신초생장기 동안 아미노산은 모든 처리구의 2년생 이상의 가지와 신초에서, 단백질은 모든 처리구의 신초에서 감소하였다. 특히 제과수는 뿌리에서 아미노산이 540 mg, 단백질이 610 mg 감소하였다. 이듬해 새로운 부위의 총 아미노산과 단백질은 전년도 제과수에서 각각 730 mg, 1290 mg으로 높았고, 전년도 착과량이 많은 엽과비 10에서 각각 120 mg, 400 mg으로 낮았다.

TELEMAC-2D모형을 이용한 분류각 변화에 따른 개수로 흐름특성변화 수치모의 연구 (Numerical study on flow characteristics at dividing open-channel with changing bifurcation angle using TELEMAC-2D)

  • 정대진;장창래;정관수
    • 한국수자원학회논문집
    • /
    • 제53권8호
    • /
    • pp.617-626
    • /
    • 2020
  • 본 연구에서는 TELEMAC-2D를 이용하여 개수로 분류부에서 분류각과 분류유량비 변화에 따른 유속분포, 흐름분리구역의 크기, 분류각과 유량비 변화의 상관관계를 파악하였다. 상·하류단 경계조건의 변화 없이 분류각만 90°에서 45°로 감소하면 주흐름에서 분리되어 분류수로로 유입되는 흐름의 곡률반경이 증가하고 급격한 흐름방향의 전환에 의한 에너지손실은 감소하며, 주수로와 분류수로 하류방향으로 흐르는 흐름의 관성력과 하류단 경계조건에 의한 압력경사의 영향으로 분류수로에 유입되는 분류유량비가 0.523에서 0.785로 약 1.5배 증가하였다. 분류부 상류 유입흐름의 프루우드 수가 F1 = 0.45~0.74인 흐름에서 분류각을 90°에서 45°로 15° 간격으로 감소할 때마다 분류유량비는 각각 6~10%, 17~30%, 32~54%로 비선형적으로 증가하며, F1가 최대 0.74인 흐름에서 분류유량비 증가율이 31.1%로 최소값을 나타내고 F1 = 0.58 일 때 분류유량비가 0.7 이하이면서 최대 분류유량비 증가율 53.5%을 나타내며, F1이 0.58보다 감소할수록 분류유량비가 0.7을 초과하면서 그 증가율도 함께 감소하게 된다. F1 > 0.4인 흐름은 F1 < 0.4의 흐름보다 무차원 흐름분리구역의 폭(SW/B) 변화율은 약 2.56배 높으며 무차원 흐름분리구역 길이(SL/B) 변화율은 약 5.5배 높게 나타난다.

Pseudomonas aeruginosa F722부터 유래된 biosurfactant를 이용한 등.경유 혼합물의 생분해율 향상 (Biodegradation Enhancement of The Mixture of Kerosene and Diesel by using Biosurfactant from Pseudomonas aeruginosa F722)

  • 오경택;박귀환;강창민;;정선용
    • KSBB Journal
    • /
    • 제18권6호
    • /
    • pp.529-535
    • /
    • 2003
  • 본 연구에서는 등$.$경유 혼합물을 Pseudomonas aeruginosa F722를 이용하여 분해시킬 때 생분해율에 미치는 생물계면활성제, 화학계면활성제 및 공기 공급량의 영향을 조사하였다. 그 결과, 탄화수소 분해율은 0.01%와 0.15% 농도의 생물계면활제를 첨가하였을 때가 0.05%, 0.1% 및 0.2%농도의 생물계면활제를 첨가하였을 때보다 최고 6.2% 높은 94.3, 94.2% 제거율을 나타냈다. 하지만, 0.15% 생물계면활제를 첨가하였을 때가 0.01% 생물계면활제를 첨가하였을 때보다 탄화수소 분해율이 더 안정적이었다. 그리고 생물계면활성제 (surface tension; 30mN/m)와 화학계면활성제 (Tween 80;39mN/m, detergent;31mN/m)를 0.15% 농도로 첨가하여 배양하였을때, 탄화수소 분해율은 94.2, 93.5, 93.4%로 비슷하였다. 하지만, P. aeruginosa F722의 개체수는 생물계면활성제를 첨가했을 때가 화학계면활성제를 첨가했을 때보다 2배 이상 증가된 19 ${\times}$ $10^{7}$ cfu/$m\ell$로 조사되었다. 0.5vvm으로 공기를 공급하면서 교반을 수행하였을 때, 배양 3일 후, 사용균주를 접종하지 않은 공시험에서 탄화수소 분해율은 68.8%였으며, P. aeruginosa F722를 접종하였을 때는 94.8%이었다. 0.5 vvm으로 공기를 공급하였을 때가 공기를 공급하지 않았을 때보다 배양시간이 1/3로 단축되었다. 그리고 교반배양 (3일)과 정치배양 (10일)에서 탄화수소 분해율은 각각 94.8, 93.7%였다.

Salivary Gland Uptake on 18F-FP-CIT PET as a New Biomarker in Patients With Parkinsonism

  • Seo Young Kang;Ji Young Yun;Yeon-Koo Kang;Byung Seok Moon;Hai-Jeon Yoon;Min Young Yoo;Bom Sahn Kim
    • Korean Journal of Radiology
    • /
    • 제24권7호
    • /
    • pp.690-697
    • /
    • 2023
  • Objective: 18F-FP-CIT positron emission tomography (PET) is known for its high sensitivity and specificity for evaluating striatal dopamine transporter (DAT) binding. Recently, for the early diagnose of Parkinson's disease, many researchers focused on the diagnosis of synucleinopathy in organs involved in non-motor symptoms of Parkinson's disease. We investigated the feasibility of salivary gland uptake on 18F-FP-CIT PET as a new biomarker in patients with parkinsonism. Materials and Methods: A total of 219 participants with confirmed or presumed parkinsonism, including 54 clinically diagnosed idiopathic Parkinson's disease (IPD), 59 suspected and yet undiagnosed, and 106 with secondary parkinsonism, were enrolled. The standardized uptake value ratio (SUVR) of the salivary glands was measured on both early and delayed 18F-FP-CIT PET scans using the cerebellum as the reference region. Additionally, the delayed-to-early ratio (DE_ratio) of salivary gland was obtained. The results were compared between patients with different PET patterns. Results: The SUVR in early 18F-FP-CIT PET scan was significantly higher in patients with IPD pattern compared that in the non-dopaminergic degradation group (0.5 ± 0.19 vs. 0.6 ± 0.21, P < 0.001). Compared with the non-dopaminergic degradation group, the DE_ratio was significantly lower in patients with IPD (5.05 ± 1.7 vs. 4.0 ± 1.31, P < 0.001) or atypical parkinsonism patterns (5.05 ± 1.7 vs. 3.76 ± 0.96, P < 0.05). The DE_ratio was moderately and positively correlated with striatal DAT availability in both the whole striatum (r = 0.37, P < 0.001) and posterior putamen (r = 0.36, P < 0.001). Conclusion: Parkinsonism patients with an IPD pattern exhibited a significant increase in uptake on early 18F-FP-CIT PET and a decrease in the DE_ratio in the salivary gland. Our findings suggest that salivary gland uptake of dual-phase 18F-FP-CIT PET can provide diagnostic information on DAT availability in patients with Parkinson's disease.

벽온도분포가 정현파인 원관에서 왕복유동에 의한 열전달 해석 (Heat Transfer by an Oscillating Flow in a Circular Pipe with Sinusoidal Wall Temperature Distributions)

  • 이대영;박상진;노승탁
    • 대한기계학회논문집
    • /
    • 제17권12호
    • /
    • pp.3208-3216
    • /
    • 1993
  • Heat transfer characteristics of the laminar oscillating flow in a circular pipe have been studied under the condition that the wall temperature of the pipe is distributed sinusoidally with the axial direction. The axial velocity was assumed to be uniform in radial direction and the temperature field was analyzed by means of the perturbation method. The results show that the difference between wall and section-time-averaged fluid temperature increases as the oscillating frequency increases and eventually converges to a constant value which is determined by the ratio of swept distance to the characteristic length of wall temperature distribution. Also it is shown that the dominant variable in the heat transfer process when swept distance ratio is greater than 1 is not thermal Womersley number(F) but thermal Womersley number multiplied by the square root of swept distance ratio. The variation of the time-averaged Nusselt number is obtained as a function of F. The results indicate that Nusselt number is proportional to $F_{\epsilon}^{1/2}$ when both of F and .epsilon. are much greater than 1.

압출공정 스크류특성 결정을 위한 전체 형상계수 (A Total Shape Factor for Determining Three-Dimensional Screw Characteristics of Extrusion Process)

  • 김시조;권태헌
    • 대한기계학회논문집
    • /
    • 제18권10호
    • /
    • pp.2533-2542
    • /
    • 1994
  • This paper suggests a simple approach to determining the screw characteristics for a three0dimensional flow in a channel with a finite aspect ratio(ratio of a width to a depth, W/H) by introducing a Total Shape Factor($F_t$) to correct a two-dimensional flow analysis for a channel with an infinite aspect ratio. In the present study, the Total Shape Factor($F_t$) was defined as a ratio of a net flow rate obtained by the three-dimensional analysis to that by the two-dimensional analysis. In the proposed approach, the quantity, $ \frac{{\partial}F_t}{\partial(H/W)}$ turns out to be almost constant and to play an important role in understanding the effects of the flights. Therefore, $ \frac{{\partial}F_t}{\partial(H/W)}$ are extensively reported in this paper in terms of several dimensionless parameters. This simple approach with such database will be very useful for extruder designers to predict the screw characteristics.

바이오가스로부터 고순도 CH4 회수를 위한 PSA 공정의 실험적 연구 (Experimental Study on PSA Process for High Purity CH4 Recovery from Biogas)

  • 김영준;이종규;이종연;강용태
    • 설비공학논문집
    • /
    • 제23권4호
    • /
    • pp.281-286
    • /
    • 2011
  • The objective of this study is to optimize the four-bed six-step pressure swing adsorption(PSA) process for high purity $CH_4$ recovery from the biogas. The effects of P/F(purge to feed) ratio and cycle time on the process performance were evaluated. The cyclic steady-states of PSA process were reached after 12 cycles. The purity and recovery rate of product gas, pressure and temperature changes were constant as the cycle repeated. It was shown that the P/F ratio gave significant effect on the product recovery rate by increasing the amount of purge gas in purge and regeneration step. The optimal P/F ratio was found to be 0.08. As the cycle time increased, the product purity decreased by increasing the feed gas flow rate. It was found that the optimal operating conditions were P/F ratio of 0.08 and total cycle time of 1,440 seconds with the purity of 97%.