• Wind and Structures
• /
• v.1 no.1
• /
• pp.67-75
• /
• 1998

Tiger Gate Bridge, a steel suspension bridge with a main span of 888 m and a stiffening box girder, is located at the Pearl River Estuary, Guangdong Province, one of the typhoon-prone area in China. Focusing on the developing of the full aeroelastic model of the bridge and simulation of the wind field of the bridge site in a large boundary wind tunnel at Tongji University, Shanghai, China, some main results about the wind resistant properties of the bridge including aerodynamic instability, buffeting responses both being in operation and erection stages by using of a full aeroelastic model wind tunnel testing are introduced. Some of analytical approaches to those aerodynamic behaviours are also presented, and compared with experimental data of the testing.

• Ocean Systems Engineering
• /
• v.9 no.2
• /
• pp.135-155
• /
• 2019

One of the safest and the most economical methods to transfer oil and gas is pipeline system. Prediction and prevention of pipeline failures during its assessed lifecycle has considerable importance. The dropped object is one of the accidental scenarios in the failure of the submarine pipelines. In this paper, using Monte Carlo Sampling, the probability of damage to a submarine pipeline due to a box-shaped dropped object has been calculated in terms of dropped object impact frequency and energy transfer according to the DNV-RP-F107. Finally, Reliability sensitivity analysis considering random variables is carried out to determine the effect intensity of each parameter on damage probability. It is concluded that impact area and drag coefficient have the highest sensitivity and mass and add mass coefficient have the lowest sensitivity on probability of failure.

• Journal of Sericultural and Entomological Science
• /
• v.28 no.2
• /
• pp.9-14
• /
• 1986

The rootability of hardwood cutting of mulberry (Morus alba L.) depending upon the kinds of cutting beds, soil of cutting beds, effect of growth regulator (Rootone-F), pretreatments of cutting scion, parts of branches were investigated, The results were as follows ; 1. Rootability was the highest in cutting after callus formed on sand bed, whereas null in the treatment of rice seedling hot bed. 2. Optimum cutting season was around March 26, showed 100% rootability in all treatments except wooden box filled with sand. 3. The order of rootability related with cutting part of branch was upper$^{\circ}C$), and cutting after formation of callus increased rootability, whereas cuttings left in open air for 5 days showed null rootability.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.4
• /
• pp.320-328
• /
• 2007

This paper presents a stiffness modeling of a low-DOF parallel robot, which takes into account of elastic deformations of joints and links, A low-DOF parallel robot is defined as a spatial parallel robot which has less than six degrees of freedom. Differently from serial chains in a full 6-DOF parallel robot, some of those in a low-DOF parallel robot may be subject to constraint forces as well as actuation forces. The reaction forces due to actuations and constraints in each serial chain can be determined by making use of the theory of reciprocal screws. It is shown that the stiffness of an F-DOF parallel robot can be modeled such that the moving platform is supported by 6 springs related to the reciprocal screws of actuations (F) and constraints (6-F). A general $6{\times}6$ stiffness matrix is derived, which is the sum of the stiffness matrices of actuations and constraints, The compliance of each spring can be precisely determined by modeling the compliance of joints and links in a serial chain as follows; a link is modeled as an Euler beam and the compliance matrix of rotational or prismatic joint is modeled as a $6{\times}6$ diagonal matrix, where one diagonal element about the rotation axis or along the sliding direction is infinite. By summing joint and link compliance matrices with respect to a reference frame and applying unit reciprocal screw to the resulting compliance matrix of a serial chain, the compliance of a spring is determined by the resulting infinitesimal displacement. In order to illustrate this methodology, the stiffness of a Tricept parallel robot has been analyzed. Finally, a numerical example of the optimal design to maximize stiffness in a specified box-shape workspace is presented.

• Korean Institute of Interior Design Journal
• /
• no.5
• /
• pp.45-52
• /
• 1995

Frank Lloyd Wright, a master of the 20th Century Ar-chitecture, contributed tremendously in creating a wholly new form of American architecture called Prairie Style. His idea behind the development of the building structur-al system, organic relationships between inner and outer space, horizontal vertical lines, and idea of extending and expanding interior spaces came from nature. He had completed over 390 projects throughout his life and 90% of those projects were residential design. The most typical characteristic shared by many of his residential design was that each design element, whether it is functional or aesthetical, has close relationship to or-ganic nature, human scale, theoretical floor plants, and maximum emphasis on horizontal lines in respect to na-ture. His concept of "flow of spaces" reformed common the-ory of room next to room in a enclosed space. His sense of "wall" was no longer the side of a box. Careful selec-tion of finishing materials, colors, and natural images en-hance the design as well. F.L. Wright was an artist, designer, and architect who believed the exterior space should have direct relationship to the interior space. His architectural philosophy was not only to design exterior of architecture but also to ful-fill his space through the careful development of interior elements such as furniture, and lighting fixture. Even the patterns for leaded glass windows were designed to have unified appearance from outside to inside of the house. The objective of this study was to analyze floor plans, spatial organizations, and interior design elements of the houses which represent the best of F.L. Wright's design principles and philosophy behind Prairie Style. The meth-od used to collect informations for this study was based on books, articles, journals, and actual site visits. actual site visits.

• Korean Journal of Materials Research
• /
• v.25 no.3
• /
• pp.125-131
• /
• 2015

Fluorine-doped $SnO_2$ (FTO) thin film/Ag nanowire (NW) double layers were fabricated by means of spin coating and ultrasonic spray pyrolysis. To investigate the optimum thickness of the FTO thin films when used as protection layer for Ag NWs, the deposition time of the ultrasonic spray pyrolysis process was varied at 0, 1, 3, 5, or 10 min. The structural, chemical, morphological, electrical, and optical properties of the double layers were examined using X-ray diffraction, X-ray photoelectron spectroscopy, field-emission scanning electron microscopy, transmission electron microscopy, the Hall effect measurement system, and UV-Vis spectrophotometry. Although pure Ag NWs formed isolated droplet-shaped Ag particles at an annealing temperature of $300^{\circ}C$, Ag NWs covered by FTO thin films maintained their high-aspect-ratio morphology. As the deposition time of the FTO thin films increased, the electrical and optical properties of the double layers degraded gradually. Therefore, the double layer fabricated with FTO thin films deposited for 1 min exhibited superb sheet resistance (${\sim}14.9{\Omega}/{\Box}$), high optical transmittance (~88.6 %), the best FOM (${\sim}19.9{\times}10^{-3}{\Omega}^{-1}$), and excellent thermal stability at an annealing temperature of $300^{\circ}C$ owing to the good morphology maintenance of the Ag NWs covered by FTO thin films.

• Journal of Ecology and Environment
• /
• v.29 no.6
• /
• pp.511-520
• /
• 2006

The study analyzed the distribution of mammalia per altitude in Gamebong, the highest trail of Juwangsan National Park and confirmed the inhabitation of 22 different species inhabiting in the park. Starting from 200 m to 800 m above the sea level was segmented into 100 m unit. The result of analysis has shown that the Tamias sibiricus is the dominant specie throughout in all segments. Species confirmed to be inhabiting in all segments of research areas were Mustela sibirica, Caproelus pygargus and squirrel. By analyzing the confirmed Field Sign basing from the observation point, it has shown close relations between types of species and population following the increase in altitude (y=-0.0234 + 25.552, $R^2$=0.9296, $F_{0.05}$(1,4)=7.71, p<0.05). However, the result of analysis targeting nine species inhabiting in at least five out of six 100 m segmented units has shown that only two species, Apodemus sgrarius (y=-0.034X+25.2, $R^2$=0.905, $F_{0.05}$(1, 4)=38.169, p<.0.01) and Sciurus vulgaris (y=-0.0154X+ 12.819, $R^2$=0.781, $F_{0.05}$(1, 4)=14.270, p<0.05) were affected by the altitude. Therefore, it is judged that the distribution of species does not follow the altitude variation but follows the food conditions and the structure of habitat. The result of analysis of Box and Whisker Diagram had shown lowest quartile deviation($Q_U-Q_L$) in Nature Restoration Area that is located in $200{\sim}300m$ above the sea level, where hikers are prohibited from entering. In $500{\sim}600m$ above the sea level segment that has similar food environment and trail, it has shown the widest distribution. Further research is required on this segment for the excretion drops of Prionailurus bengalensis, a Grade II class of endangered species, were found on the trails.

• Journal of The Korean Astronomical Society
• /
• v.48 no.4
• /
• pp.213-228
• /
• 2015

The Horizon Run 4 is a cosmological N-body simulation designed for the study of coupled evolution between galaxies and large-scale structures of the Universe, and for the test of galaxy formation models. Using 6300³ gravitating particles in a cubic box of L_box = 3150 h⁻¹Mpc, we build a dense forest of halo merger trees to trace the halo merger history with a halo mass resolution scale down to M_s = 2.7 × 10¹¹h⁻¹M_⊙. We build a set of particle and halo data, which can serve as testbeds for comparison of cosmological models and gravitational theories with observations. We find that the FoF halo mass function shows a substantial deviation from the universal form with tangible redshift evolution of amplitude and shape. At higher redshifts, the amplitude of the mass function is lower, and the functional form is shifted toward larger values of ln(1/σ). We also find that the baryonic acoustic oscillation feature in the two-point correlation function of mock galaxies becomes broader with a peak position moving to smaller scales and the peak amplitude decreasing for increasing directional cosine μ compared to the linear predictions. From the halo merger trees built from halo data at 75 redshifts, we measure the half-mass epoch of halos and find that less massive halos tend to reach half of their current mass at higher redshifts. Simulation outputs including snapshot data, past lightcone space data, and halo merger data are available at http://sdss.kias.re.kr/astro/Horizon-Run4.

• Wind and Structures
• /
• v.20 no.2
• /
• pp.349-361
• /
• 2015

Higher-mode vertical vortex-induced vibrations (VIV) have been observed on several steel box-girder suspension bridges where different vertical modes are selectively excited in turn with wind velocity in accordance with the Strouhal law. Understanding the relationship of VIV amplitudes for different modes of vibration is very important for wind-resistant design of long-span box-girder suspension bridges. In this study, the basic rectangular cross-section with side ratio of B/D=6 is used to investigate the effect of different modes on VIV amplitudes by section model tests. The section model is flexibly mounted in wind tunnel with a variety of spring constants for simulating different modes of vibration and the non-dimensional vertical amplitudes are determined as a function of reduced velocity U/fD. Two 'lock-in' ranges are observed at the same onset reduced velocities of approximately 4.8 and 9.4 for all cases. The second 'lock-in' range, which is induced by the conventional vortex shedding, consistently gives larger responses than the first one and the Sc-normalized maximum non-dimensional responses are almost the same for different spring constants. The first 'lock-in' range where the vibration frequency is approximately two times the vortex shedding frequency is probably a result of super-harmonic resonance or the "frequency demultiplication". The main conclusion drawn from the section model study, central to the higher-mode VIV of suspension bridges, is that the VIV amplitude for different modes is the same provided that the Sc number for these modes is identical.

• The Plant Pathology Journal
• /
• v.28 no.4
• /
• pp.423-427
• /
• 2012

Pseudomonas syringae pv. actinidiae strains, the causal agents of bacterial canker on kiwifruit, were isolated from Korea and Italy in 2011. Among 87 isolates, a total of six representative strains, three from Korea and three from Italy, were identified on the basis of biochemical and physiological tests. Identities were confirmed by PCR using P. syringae pv. actinidiae-specific primers PsaF1/R2, which amplified a 280-bp DNA fragment. The strains isolated from Korea in this study displayed BOX-PCR patterns similar to those isolated from Italy but different from those isolated previously in Korea or the pathotype P. syringae pv. actinidiae strain. The effector hopA1 and hopH1 genes, which are known to be present in strains isolated recently from France and Italy, were also present in P. syringae pv. actinidiae strains, SYS1, SYS2 and SYS4, isolated from Korea in this work. However, no amplicons of the expected size were obtained from strains previously isolated from Korea and Japan. In addition, the Korean strains isolated in this work belonged to haplotype I for the cts gene identical to those strains isolated from recent outbreaks in Italy. These results suggest that P. syringae pv. actinidiae strains isolated from Korea and examined in this work are a new type of strain similar to those found from recent outbreaks in Italy. This is the first report on the occurrence of cts haplotype I strains of P. syringae pv. actinidiae affecting kiwifruit plants in Korea.