• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.12
• /
• pp.1085-1089
• /
• 2002

The circular cavity resonator which can measure the dielectric properties of dielectrics in the Ka-band(26.5GHz∼400Hz) frequency range was designed and fabricated. A structure of the resonator is divided into two equal parts of the length and the dielectric plate sample is placed between two halves. Exciting and detecting of the resonator is Performed by WR28 rectangular waveguides using Bethe's small hole coupling. The GaAs plate sample, whose performance is known to be 13 in millimeter wave range, was used for the verification of the performance of the fabricated circular cavity resonator In the measurement of GaAs single crystal using that resonator, the resonant frequency of the dominant TE$\sub$011/ mode, the permittivity and Q${\times}$f$\sub$0/ were measured as 26.69GHz, 12.9 and 124,000GHz, respectively.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1764-1766
• /
• 1998

One of the most important problems in the development of AC PDP is to make long life and more stable panels. It is well known that the life time of a panel strongly depends on the sputtering-resistant property of the protecting layer such as MgO. However, the sputtering rate is so low that it is very difficult to measure the sputtering-resistant property of MgO. This paper describes a high speed measurement technique to test the sputtering-resistant property of MgO thin film by the R.F. magnetron sputtering. In this case the MgO sample has been used as a target of sputtering process. Moreover, the MgO surface changed by ion-bombarding sputtering are also discussed with SEM photoes.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1417-1419
• /
• 1997

In this paper, the dielectric properties is made researches by the dose of electron beam in order to investigate the electrical properties for transformer oils due to electron beam irradiation. To measure the dielectric loss of irradiated specimen, the liquid electrode of coaxial cylindrical shape is used, and its geometric capacitance is 16 [pF]. And the dielectric dissipation factor, $tan{\delta}$, is measured by using the Video Bridge 2150. The thermal static oven with an automatic temperature controller is used so as to apply specific temperature to specimen. This experiments for measuring the dielectric loss is performed at $20{\sim}120[^{\circ}C]$ in temperature range, $30{\sim}1.5{\times}10^5[Hz]$ in frequency and $300{\sim}500[mV]$ in voltage.

• International Journal of Reliability and Applications
• /
• v.8 no.1
• /
• pp.111-124
• /
• 2007

In this paper, we apply insightful statistical reliability tools to manage and seek improvements in the strengths of Oriented Strand Board (OSB). As a part of the OSB manufacturing process, the product undergoes destructive testing at various intervals to determine compliance with customers' specifications. Workers perform these tests on sampled cross sections of the OSB panel to measure the tensile strength, also called internal bond (IB), in pounds per square inches until failure. Additional stiffness strength tests include parallel and perpendicular elasticity indices (EI), which are taken from cross sectional samples of the OSB panel in the parallel and perpendicular directions with respect to the orientation of the wood strands. We explore both graphically and statistically these "pressure-to-failures" of OSB. Also, we briefly comment on reducing sources of variability in the IB and EI of OSB.

• Journal of Welding and Joining
• /
• v.20 no.5
• /
• pp.78-86
• /
• 2002

A metallurgical model for the prediction of prior austenite grain size considering the dissolution kinetics of M$_3$C precipitates at the heat affected zone of SA508-cl.3 was proposed. The isothermal kinetics of grain growth and dissolution were respectively described by well-known equation, $dD/dT=M({\Delta}F_{eff})^M$ and Whelan's analytical model. The isothermal grain growth experiments were carried out for measure the kinetic parameters of grain growth. The precipitates of the base metal and the specimens exposed to thermal cycle were examined by TEM-carbon extraction replica method. The model was assessed by the comparison of BUE simulation experiments and showed good consistencies. However, there was no difference between the model considering and ignoring $M_3C$ precipitates. It seems considered that pinning force exerted by $M_3C$ Precipitates was lower than driving force for grain growth due to large size and small fraction of precipitates, and mobility of grain boundary was low in the lower temperature range.

• Hwankyungkyoyuk
• /
• v.18 no.1 s.26
• /
• pp.97-109
• /
• 2005

This study was motivated to understand ways in which actors (students) perceived internal and external conditions of actions in determining responsibility of so-called environment friendly actions. To understand hidden reasons by which students conduct specific environmental actions more or less frequently may be more important and meaningful for environment teachers than to measure and know the frequency that their students do such actions. This study has been implemented by applying questionnaire survey to 752 ruddle school and high school students and 211 environment teachers. To test the hypothesis of this study that there would be significant differences in awareness of environment friendly actions and barriers to implementing those actions between students and environment teachers, frequency analysis and f-test have been conducted. Primary results of this study can be summarized as follows; It has been found that there were a number of evidences showing significant differences in awareness of environment friendly behavior between students and teachers. In term of action frequency, significant differences have been observed in 11 of the listed 20 actions. Similar resulted have been found in terms of perceived difficult, perceived effectiveness, and perceived guilty. These results seem to support an argument that the current list-making and checklist style of connecting students to so-called environment friendly actions need to be reviewed in a critical manner.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.3
• /
• pp.383-391
• /
• 2006

In Korea, the major source of serious air pollution is motor vehicles. Air pollution from vehicles has been annually increased. Then the government will try to control the vehicle emission by applying the effective emission management policy for the manufactured and in-used car. It is necessary to correctly calculate the emission factor for successful propulsion of the vehicle emission control policy. In this study, correlation analysis of exhaust emissions from vehicles between CVS-75 mode and Korea mode was conducted. A total of 25 light-duty buses were tested on the chassis dynamometer system in order to measure CO, HC, NOx PM and fuel efficiency (F.E.). For the test modes, 10 different Korea modes and CVS-75 mode were used. As the result of correlation analysis between those modes, most of the correlation coefficients were higher than 0.90. On the basis of high correlation between those modes, correction factors by driving conditions were estimated. Through the results of this study, we obtained essential basic data to correct difference from those modes.

• The Korean Journal of Physiology and Pharmacology
• /
• v.20 no.4
• /
• pp.367-378
• /
• 2016

Recently, it was reported that the role of mitochondria-reactive oxygen species (ROS) generating pathway in cisplatin-induced apoptosis is remarkable. Since a variety of molecules are involved in the pathway, a comprehensive approach to delineate the biological interactions of the molecules is required. However, quantitative modeling of the mitochondria-ROS generating pathway based on experiment and systemic analysis using the model have not been attempted so far. Thus, we conducted experiments to measure the concentration changes of critical molecules associated with mitochondrial apoptosis in both human mesothelioma H2052 and their ${\rho}^0$ cells lacking mitochondrial DNA (mtDNA). Based on the experiments, a novel mathematical model that can represent the essential dynamics of the mitochondrial apoptotic pathway induced by cisplatin was developed. The kinetic parameter values of the mathematical model were estimated from the experimental data. Then, we have investigated the dynamical properties of this model and predicted the apoptosis levels for various concentrations of cisplatin beyond the range of experiments. From parametric perturbation analysis, we further found that apoptosis will reach its saturation level beyond a certain critical cisplatin concentration.

• International Journal of Contents
• /
• v.11 no.2
• /
• pp.15-19
• /
• 2015

In this paper, we propose an efficient document layout analysis algorithm that includes table detection. Typical methods of document layout analysis use the height and gap between words or columns. To correspond to the various styles and sizes of documents, we propose an algorithm that uses the mean value of the distance transform representing thickness and compare with components in the local area. With this algorithm, we combine a table detection algorithm using the same feature as that of the text classifier. Table candidates, separators, and big components are isolated from the image using Connected Component Analysis (CCA) and distance transform. The key idea of text classification is that the characteristics of the text parallel components that have a similar thickness and height. In order to estimate local similarity, we detect a text region using an adaptive searching window size. An improved adaptive run-length smoothing algorithm (ARLSA) was proposed to create the proper boundary of a text zone and non-text zone. Results from experiments on the ICDAR2009 page segmentation competition test set and our dataset demonstrate the superiority of our dataset through f-measure comparison with other algorithms.

• Annual Conference on Human and Language Technology
• /
• 2004.10d
• /
• pp.20-24
• /
• 2004

본 논문에서는 환경 잡음과 원거리 음성 입력 그리고 노인 발화 등의 열악한 음성 인식 환경에서의 음성 언어이해(spoken language understanding)를 위한 정보 추출 접근 방식에 대해 논하고 있다. 정보 추출의 목적은 미리 정의된 slot에 적절한 값을 찾는 것이다. 음성 언어 이해를 위한 정보 추출은 필수적인 요소만을 추출하는 것을 목적으로 하는 개념 집어내기(concept spotting) 접근 방식을 사용한다. 이러한 방식은 미리 정의된 개념 구조 slot에만 관심을 가지기 때문에. 음성 언어 이해에서 사용되는 정보 추출은 언어를 완전히 이해한다기보다는 부분적으로 이해하는 방식을 취하고 있다. 음성 입력 언어는 주로 열등한 인식 환경에서 이루어지기 때문에 많은 인식 오류를 가지고 이로 인해 텍스트 입력에 비해 이해하기 어렵다. 이러한 점을 고려하여, 특정 정보에 집중함으로써 음성 언어를 이해하고자 시도하였다. 도로 정보 안내 영역을 대상으로 한 실험에서 텍스트 입력(WER 0%)과 음성 입력(WER 39.0%)이 주어졌을 때, 개념 집어내기 방식의 F-measure 값은 각각 0.945, 0.823을 나타내었다.