• 제목/요약/키워드: F plate and H plate

검색결과 126건 처리시간 0.027초

Experimence Study of Trace Water and Oxygen Impact on SF6 Decomposition Characteristics Under Partial Discharge

  • Zeng, Fuping;Tang, Ju;Xie, Yanbin;Zhou, Qian;Zhang, Chaohai
    • Journal of Electrical Engineering and Technology
    • /
    • 제10권4호
    • /
    • pp.1786-1795
    • /
    • 2015
  • It is common practice to identify the insulation faults of GIS through monitor the contents of SF6 decomposed components. Partial discharges (PD) could lead to the decomposition of SF6 dielectric, so new reactions usually occur in the mixture of the newly decomposed components including traces of H2O and O2. The new reactions also cause the decomposed components to differ due to the different amounts of H2O and O2 even under the same strength of PD. Thus, the accuracy of assessing the insulation faults is definitely influenced when using the concentration and corresponding change of decomposed components. In the present research, a needle-plate electrode was employed to simulate the PD event of a metal protrusion insulation fault for two main characteristic components SO2F2 and SOF2, and to carry out influence analysis of trace H2O and O2 on the characteristic components. The research shows that trace H2O has the capability of catching an F atom, which inhibits low-sulfide SFx from recombining into high-sulfide SF6. Thus, the amount of SOF2 strongly correlates to the amount of trace H2O, whereas the amount of SO2F2 is weakly related to trace H2O. Furthermore, the dilution effect of trace O2 on SOF2 obviously exceeds that of SO2F2.

태양플레어망원경의 관측 시스템 (OBSERVATION SYSTEM OF SOLAR FLARE TELESCOPE)

  • 박영득;문용재;장비호;심경진
    • 천문학논총
    • /
    • 제12권1호
    • /
    • pp.35-45
    • /
    • 1997
  • SOFT($\underline{So}lar\;\underline{F}lare\;\underline{T}elescope$) installed at BOAO(Bohyunsan Optical Astronomy Observatory) is purposed for observing solar active regions using four refractors on single mount with a $400"\times300"$ field of view: Two refractors with a diameter of 15cm(f15) are observe the white light and $H\alpha$, and the other two refractors with a diameter of 20cm(f8) are observe the magnetic field distribution and Doppler shifts at the solar chromosphere. Three Lyot filters, one of the most important observational instruments, are installed on the optical rails for VMG, LMG, and $H\alpha$ that possible to very narrow pass band observation under high precision stability of temperature. From the combination of KD*P and quarter wave plate in the Lyot filter possible observe the magnetic fields strength and doppler shifts by using the characteristics of polarization components. In this paper, we introduce the basic characteristics, optical system, and monitor system of the SOFT.

  • PDF

Physicochemical Properties and Shelf-Life of Regular-Fat Sausages with Various Levels of Grape Tomato Powder Prepared by Different Drying Methods

  • Qiu, Zhuang Zhuang;Chin, Koo Bok
    • 한국축산식품학회지
    • /
    • 제40권5호
    • /
    • pp.722-733
    • /
    • 2020
  • This study was aimed to investigate the physicochemical properties, texture, and antioxidant, and antimicrobial activities of regular-fat sausages (RFSs) mixed with 0.25 and 0.5% of oven-dried and freeze-dried grape tomato powder (GTP, 150 ㎛) during storage at 4℃. RFSs were made by six treatments that included: control (CTL), REF (sausages with 0.1% ascorbic acid alone), F1GTPSs (F1) and F2GTPSs (F2) (sausages with 0.25% and 0.5% freeze-dried GTP), and O1GTPSs (O1) and O2GTPSs (O2) (sausages with 0.25% and 0.5% GTP oven-dried at 100℃). Sausages with added oven-dried grape tomato powders (OGTPs) showed decreased pH, lightness (L), total plate count (TPC), and thiobarbituric acid-reactive substances (TBARS) compared to the sausages mixed with freeze-dried GTP (FGTPSs), but also had the highest redness (a) and yellowness (b) values among the treatments. With increasing levels of GTP, the hardness and chewiness of the sausages gradually decreased and these were decreased more in the FGTPSs (F) than in the OGTPSs (O). Compared to the FGTPSs, OGTPSs had higher antioxidant and antimicrobial activities, which extend the shelf-life of meat products. Application of OGTP to RFSs resulted in higher lipid antioxidant, antimicrobial activities, improving physicochemical properties and extended the shelf-life.

불소의 농도와 Seed Material이 Crystal Growth에 미치는 영향 (EFFECTS OF FLUORIDE CONCENTRATION AND SEED MATERIAL ON SEEDED CRYSTAL GROWTH)

  • 오승연;정일영;금기연;이찬영
    • Restorative Dentistry and Endodontics
    • /
    • 제22권2호
    • /
    • pp.560-574
    • /
    • 1997
  • The present study was undertaken to investigate the crystal growth onto human enamel mineral and synthetic hydroxyapatite(HA) seeds in media resembling the enamel fluid composition. Effects of fluoride at high concentrations on the precipitation were also examined in a bench-top crystal growth model adopting a miniaturized reaction column. The Ca, P and F concentrations and pH values of the inlet and outlet solutions were determined. The recovered solid samples were weighed to assess the amount of minerals precipitated during the experimental period, and finally viewed under a scanning electron microscope. Remarkable findings were that 1) both biological and synthetic seeds with the same total surface areas yielded similar amounts of crystal growth, 2) the amount of crystal growth was accelerated in a manner depending on fluoride concentrations in the media, 3) SEM observations disclosed that without the addition of fluoride, precipitation of thin, plate-like OCP crystals became prominent, but by increasing the fluoride concentration(beyond 1ppm F), rod-like crystals having a pointed edge were most frequently observed, without any evidence for precipitation of the plate-like crystals. Furthermore, the dimension of rod-like crystals was increased in proportion to fluoride concentrations, 4) there was no difference in the morphological feature of precipitated mineral phase upon seeding between human enamel seed and synthetic HA seed. The overall results support the view that the seeded crystal growth model is of value to gain insight into the mechanism of enamel crystal growth under fluoride regimens.

  • PDF

스컬용융법에 의한 Na사규소운모 합성 및 특성평가 (Synthetic and characterization of Na-tetrasilicic fluorine mica by skull melting method)

  • 석정원;최종건
    • 한국결정성장학회지
    • /
    • 제19권4호
    • /
    • pp.190-195
    • /
    • 2009
  • 스컬용융법에 의해 Na사규소운모를 합성하였다. $Mg_3(OH)_2Si_4O_{10}:Na_2SiF_6:SiO_2=8.3:24.8:66.9$ mol% 비율로 혼합한 출발원료를 ${\phi}13{\times}H14cm$의 냉각도가니에 채우고 2.84MHz 출력주파수의 고주파발진기를 이용하여 가열하였다. 원료는 융액상태에서 1시간 유지하였으며 도가니 내에서 냉각시켰다. 운모의 비저항은 추정하였으며, 원주모양과 판상으로 합성할 수 있었다.

털새동부 추출물의 항균효과 및 특성 (Antimicrobial Activity and Characteristics of Amblytropis pauciflora Kitagawa Extract)

  • 김현수
    • 한국식품영양과학회지
    • /
    • 제27권5호
    • /
    • pp.993-999
    • /
    • 1998
  • Methanol extract of roots of Amblytropis pauciflora Kitagawa showed the antimicrobial activity to three test strains. Antimicrobial spectra of various extracts of Amblytropis pauciflora Kitagawa were tested against 24 strains of bacteria and fungi. The crude methanol extract inhibited the growth of 12 strains of bacteria and Asp. fumigatus with the exception of yeasts. The properties of the antimicrobial substance were very stable under heat(at 12$0^{\circ}C$), acid(pH 3.0) and alkali(pH 11.0) treatment. Only the root harvested in spring showed the antimicrobial activity. Among the components extracted by butanol, ginseng saponin Rg1 and various saponin-like materials were detected by TLC analysis using a plate of silica gel 60F254. The antimicrobial compound was purified by methanol extraction, activated charcoal column chromatography, Sep-pak(C18) pretreatment and reverse phase HPLC. The purified compound was detected at 13.520 min as a single peak(about 98% purity) through the HPLC analysis.

  • PDF

청국장에 관한 연구(I) -청국장 제조과정에 있어서 콩단백질의 변화에 관하여- (Studies on Chung-Kook-Jang (Part I) -On the changes of soy-bean protein in manufacturing Chung-Kook-Jang-)

  • 이계호;이효지;정문교
    • Applied Biological Chemistry
    • /
    • 제14권3호
    • /
    • pp.191-200
    • /
    • 1971
  • 콩 및 장류 연구의 일환으로서 세균효소에 의하여 콩단백질을 분해하는 강력한 protease생산균주를 얻기 위하여 전국 9개도에서 볏짚을 수집하였다. 수집시료로부터 Dilution pour plate에 의하여 protease생산성 균주 총 23 균주를 순수 분리하였다. 순수분리된 전균주에 대하여 portease생산성을 screening하고 protease을 강력히 생산하는 우수균주를 선정 하였다. 우수균주인 $D_9$$F_{20}$ strain이 생성한 protease의 최적작용조건을 검토한 결과 optimum pH가 7.5이고 optimum temperature는 $40^{\circ}C$ 임을 알았다. 청국장은 다른 장류와는 달리 세균으로서 단시간 동안에 단백질을 분해시켜 만들음으로 특유한 식품인 것이다. 우수균주로 분리 선정된 $D_9$$F_{20}$ strain과 Bac. natto strain을 starter로하여 청국장을 제조하는데 세균의 protease에 의하여 콩단백질의 분해로 수용성질소화합물이 증가함을 알았다. 삶은 콩과 우수균주로 선정된 균주에 의하여 제조된 청국장에 대하여 질소형태의 변화를 보면 청국장 제조과정에서 수용성질소가 85%, TCA가용성질소, amino 태질소, peptide 태질소는 두드러지게 증가하고 반대로 삶은콩은 수용성질소가 감소하였다.

  • PDF

광촉매 활용을 위한 TiO2 나노튜브 제조기술 개발 (Development of Preparation Technology for TiO2 Nanotube Photocatalyst)

  • 구혜민;이용호;박대원
    • 한국물환경학회지
    • /
    • 제31권4호
    • /
    • pp.360-366
    • /
    • 2015
  • In this study $TiO_2$ nanotube was grown on Ti by anodic oxidation to be used as a photocatalyst. The growth and formation of $TiO_2$ nanotube was monitored during anodization in ethylene glycol electrolyte by changing voltage and composition of electrolyte. Commercially available titanium plate (purity>99.8%, thickness:1mm) Applied voltage and concentration of $NH_4F$ and $H_2O$ were varied to find the optimum condition. Applied voltage is important to make $TiO_2$ nanotube and the electrolyte containing ethylene glycol, 0.2 wt% $NH_4F$ and 2 vol% $H_2O$ was confirmed to be the optimum conditions for the formation and growth of $TiO_2$ nanotubes.

적응적 유한요소를 이용한 박스형 구조물의 좌굴해석 (Buckling Analysis of Box-typed Structures using Adaptive Finite Elements)

  • 송명관;김선훈
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2007년도 정기 학술대회 논문집
    • /
    • pp.271-274
    • /
    • 2007
  • The finite element linear buckling analysis of folded plate structures using adaptive h-refinement methods is presented in this paper. The variable-node flat shell element used in this study possesses the drilling D.O.F. which, in addition to improvement of the element behavior, permits an easy connection to other elements with six degrees of freedom per node. The Box-typed structures can be analyzed using these developed flat shell elements. By introducing the variable node elements some difficulties associated with connecting the different layer patterns, which are common in the adaptive h-refinement on quadrilateral mesh, can be overcome. To obtain better stress field for the error estimation, the super-convergent patch recovery is used. The convergent buckling modes and the critical loads associated with these modes can be obtained.

  • PDF

Safety assessment of nuclear fuel reprocessing plant under the free drop impact of spent fuel cask and fuel assembly part I: Large-scale model test and finite element model validation

  • Li, Z.C.;Yang, Y.H.;Dong, Z.F.;Huang, T.;Wu, H.
    • Nuclear Engineering and Technology
    • /
    • 제53권8호
    • /
    • pp.2682-2695
    • /
    • 2021
  • This paper aims to evaluate the structural dynamic responses and damage/failure of the nuclear fuel reprocessing plant under the free drop impact of spent fuel cask (SFC) and fuel assembly (FA) during the on-site transportation. At the present Part I of this paper, the large-scale SFC model free drop test and the corresponding numerical simulations are performed. Firstly, a composite target which is composed of the protective structure, i.e., a thin RC plate (representing the inverted U-shaped slab in the loading shaft) and/or an autoclaved aerated concrete (AAC) blocks sacrificial layer, as well as a thick RC plate (representing the bottom slab in the loading shaft) is designed and fabricated. Then, based on the large dropping tower, the free drop test of large-scale SFC model with the mass of 3 t is carried out from the height of 7 m-11 m. It indicates that the bottom slab in the loading shaft could not resist the free drop impact of SFC. The composite protective structure can effectively reduce the damage and vibrations of the bottom slab, and the inverted U-shaped slab could relieve the damage of the AAC blocks layer dramatically. Furthermore, based on the finite element (FE) program LS-DYNA, the corresponding refined numerical simulations are performed. By comparing the experimental and numerical damage and vibration accelerations of the composite structures, the present adopted numerical algorithms, constitutive models and parameters are validated, which will be applied in the further assessment of drop impact effects of full-scale SFC and FA on prototype nuclear fuel reprocessing plant in the next Part II of this paper.