• Journal of Welding and Joining
• /
• 제1권1호
• /
• pp.37-46
• /
• 1983

This paper describes a study of fillet welded joint stressed perpendicular to the weld line. The finite element method was used to determine the stress intensity factor for cruciform joint at weld toe and root cracks according to variation of H/Tp, weld angle and main plate thickness. But, in this study, weld angle was fixed at 45.deg., since the variation of weld angle affect the stress intensity factor little, also main plate thickness was fixed. Pulsating tension fatigue test was done at the second phase of experiment. The work using the concepts of the fracture mechanics on the stable crack growth, was in the correlation of the experimental fatigue stress-life behavior because the fatigue behaviors of various joint geometries are related to the stress intensity factors calculated by F.E.M. analysis. Main results obtained are summarized as follows. 1) According to the propagation of toe crack, the variation of the stress intensity factor at root crack is obvious as H/Tp is smaller. 2) According to the propagation of root cracks, the change of the stress intensity factor of the toe is very large with propagation of root crack. 3) The calculation formula of the stress intensity factor of crack propagation at the root crack was obtained. 4) The calculation formula of the stress intensity factor at the toe cracks was obtained in similar manner. 5) From the results of experiment, the velocity of fatigue crack propagation at the weld toe and root was estimated.

• 한국응용과학기술학회지
• /
• 제14권1호
• /
• pp.103-107
• /
• 1997

This study was carried out to separate and identify the antioxidative substances in persimmon leaves. The antioxidative substances in persimmon leaves were extracted by methanol. The extract was fractionnated by SEP-PAK cartridge colum. From these results five fractions(F-I${\sim}$V) were obtained. Antioxidative activity of each fractions was examined by the DPPH methord. The F-II, III and IV showed antioxidative activity and among them F-II and F-III showed the strongest. Five frations were separated by TLC using ethylacetate : chloroform : formic acid : $H_2O$(8 : 1 : 1 : 1 v /v) as the solvent. From these results were obtained spots of Rf 0.71, 0.35 and 0.25. This spots were scraped from the plate and extracted by methanol. The extracts thuse obtained were used for examination of identify by TLC, UV /VIS-spectrophotometer and HPLC. Among them spot of Rf 0.71 were demonstrated to catechin and the spots of Rf 0.35 and 0.25 was suggested to polyphenol substances.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.245-249
• /
• 2004

Transparent materials such as fused silica are important materials in optical and optoelectronics field because of its outstanding properties, such as transparency in a wide wavelength range, strong damage resistance for laser irradiation, and high thermal and chemical stability. However, these properties make it difficult to micromachine silica in micro-sized quantities. In this study, we fabricated a micro patterns on the surface of fused silica plate using laser induced wet etching. KrF excimer laser was used as a light source. There were no burrs and micro cracks on the etched surface of fused silica and the flatness of the etched surface was fairly good. We investigated the influence of etchant upon the etch rate and quality in laser induced wet etching. Pyrene-acetone, toluene, and pyrene-toluene solution were used as etchant. In the side of etch rate, toluene and pyrene-toluene solution were better than pyrene-acetone solution.

• 한국축산식품학회지
• /
• 제21권2호
• /
• pp.149-155
• /
• 2001

The aims of this study were to examine contamination sources and provide the basic data in establishment of sanitary standard for raw pork meat. From \"Random sampling(I)\", initial total plate counts of post-slaughter samples for the group A, B and C were 1.5${\times}10^4$cfu/$textrm{cm}^2$, 5.5${\times}10^5$cfu/$textrm{cm}^2$ and 1.8${\times}10^4$cfu/$textrm{cm}^2$, respectively, and of post-prechilling samples for the group A, B and C were 1.0${\times}10^4$cfu/$textrm{cm}^2$, 4.6${\times}10^5$cfu/$textrm{cm}^2$ and 2.5${\times}10^4$cfu/$textrm{cm}^2$, respectively. Initial total plate counts of post-transportation samples for the group D, E and F did not increased, as did the group A, B and C. From \"Normal sampling(II)\", initial total plate counts of post-slaughter, post-prechilling, post-transportation and post-2 days preservation samples were 7.3${\times}10^4$cfu/$textrm{cm}^2$, 9.6${\times}10^4$cfu/$textrm{cm}^2$, 2.0${\times}10^5$cfu/$textrm{cm}^2$ and 2.5${\times}10^5$cfu/$textrm{cm}^2$, respectively. From \"Clean sampling(III)\", initial total plate counts of post-slaughter, post-prechilling, post-transportation and post-2 days preservation samples were decreased to 7.0${\times}10^2$cfu/$textrm{cm}^2$, 7.5${\times}10^2$cfu/$textrm{cm}^2$, 8.5${\times}10^2$cfu/$textrm{cm}^2$ and 5.5${\times}10^3$cfu/$textrm{cm}^2$, respectively, compared with "Normal sampling(II)". No E. coli O157:H7, Staphylococcus aureus and Salmonella were detected at each sampling step. Consequently, a slaughter method like "Clean sampling(III)" showed a better sanitary effect to low total plate counts of 10$^2$∼10$^3$times, compared with "Normal sampling(II)". The one of contamination sources for raw pork meat was at a slaughtering step, and "Clean sampling" method may be considered as the one of sanitary standards.

• 한국결정학회지
• /
• 제13권3_4호
• /
• pp.152-157
• /
• 2002

X선 회절법을 이용하여 Tricyclazole, C/sub9/H/sub7/N₃S 분자 및 결정 구조를 규명하였다. 화합물의 결정학 자료: Orthorhombic 공간군 Pca2₁, a=14.889(1) Å, b=7.444(1) Å, c=15.189(2) Å, V=1683.3(3) ų, Z= 8분자 구조는 직접법으로 풀었고 완전최소자승법으로 정밀화하여 1533(F/sub o//sup 2/>4σ(F/sub o//sup 2/))인 독립회절반점에 대하여 최종 신뢰도값 R=0.047을 얻었다. 구조 해석 결과 두 분자가 asymmetric 단위로 구성되어 있으며 각각의 분자는 서로 거의 평형을 이루면서 b축 방향으로 유사 4-fold screw를 이루고 있었다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.182-187
• /
• 2006

This research presented the heat resistance characteristics of heat sink which is newly designed through the experiment. For the same volume and base plate of heat sinks, the experiment of heat transfer characteristics was conducted for forced convection of layered type heat sink. The heat transfer and pressure drop characteristics of the layered type heat sink were compared for the various kinds of fin pitches, fin heights and heights of heat sink. The results show that thermal resistance is decreased as the height of heat sink increases and the fin height and fin pitch decrease, From the experimental data of layered type heat sink, the correlation equation of Nusselt number was obtained as follows ; $$Nu=0.845{\cdot}Re^{0.393}{\cdot}(\frac{f_h}{D_h})^{0.160}{\cdot}(\frac{f_p}{D_h})^{0.372}{\cdot}(\frac{H_{hs}}{D_h})^{-0.942}$$

• 한국자원식물학회지
• /
• 제33권6호
• /
• pp.645-650
• /
• 2020

The mechanism of anti-aging of fermented jujube (Zizyphus jujuba fruits (ZJF)) was investigated using transgenic daf-16 and mev-1 strains of C. elegans. Jujube extracts fermented for 7 days (F7-ZJF) and 14 days (F14-ZJF) with Laetiporus sulphureus were treated to a NGM agar plate with 10-15 transgenic daf-16 and mev-1 strains of the synchronized age. There was no difference of lifespan between the drug-treated group (7-day fermented ex. (F7-zjf-200 ㎍/mL), 14-day fermented ex. (F14-zjf-200 ㎍/mL)) and the non-treatment group in both daf-16 and mev-1 strains. In the thermal stress experiment, F7-zjf-200 ㎍/mL showed a significant (t = 4.017) activity in thermal stress resistance with a 12% higher survival rate than the control group. In the survival test in H2O2, F7-zjf-200 ㎍/mL and F14-zjf-100 ㎍/mL have significant activity in oxidative stress resistance compared to the control group. This study indicates that life span expand of N2 strain of the jujube extract is related to the regulation of daf-16 and inhibition of mev-1 signal in C. elegans.

• Steel and Composite Structures
• /
• 제19권5호
• /
• pp.1299-1319
• /
• 2015

This paper presents a detailed parametric study, conducted using finite element tools to cover a range of several geometric and material parameters, on the behaviour of thin-walled partially encased composite (PEC) columns. The PEC columns studied herein are composed of thin-walled built-up H-shaped steel sections with concrete infill cast between the flanges. Transverse links are provided between the opposing flanges to improve resistance to local buckling. The parametric study is confined to eccentrically-loaded columns subjected to major axis bending only. The parameters that were varied include the overall column slenderness ratio (L/d), load eccentricity ratio (e/d), link spacing-to-depth ratio (s/d), flange plate slenderness ratio (b/t) and concrete compressive strength ($f_{cu}$). The overall column slenderness ratio was chosen to be the primary variable with values of 5, 10 and 15. Other parameters were varied within each case of L/d ratio. The effects of the selected parameters on the behaviour of PEC columns were studied with respect to the failure mode, peak axial load, axial load versus average axial strain response, axial load versus lateral displacement response, moment versus lateral displacement behaviour and the axial load-moment interaction diagram. The results of the parametric study are presented in the paper and the influences of each of the parameters investigated are discussed.

• 한국재료학회지
• /
• 제19권1호
• /
• pp.28-32
• /
• 2009

Silicon carbide (SiC) is a promising material for power device applications due to its wide band gap (3.26 eV for 4H-SiC), high critical electric field and excellent thermal conductivity. The Schottky barrier diode is the representative high-power device that is currently available commercially. A field plate edge-terminated 4H-SiC was fabricated using a lift-off process for opening the Schottky contacts. In this case, Ni/Ti dual-metal contacts were unintentionally formed at the edge of the Schottky contacts and resulted in the degradation of the electrical properties of the diodes. The breakdown voltage and Schottky barrier height (SBH, ${\Phi}_B$) was 107 V and 0.67 eV, respectively. To form homogeneous single-metal Ni/4H-SiC Schottky contacts, a deposition and etching method was employed, and the electrical properties of the diodes were improved. The modified SBDs showed enhanced electrical properties, as witnessed by a breakdown voltage of 635 V, a Schottky barrier height of ${\Phi}_B$=1.48 eV, an ideality factor of n=1.04 (close to one), a forward voltage drop of $V_F$=1.6 V, a specific on resistance of $R_{on}=2.1m{\Omega}-cm^2$ and a power loss of $P_L=79.6Wcm^{-2}$.

• 한국표면공학회지
• /
• 제43권1호
• /
• pp.25-30
• /
• 2010

Titanium and titanium alloys are widely used for orthopedic and dental implants for their superior mechanical properties, low modulus, excellent corrosion resistance and good biocompatibility. In this study, corrosion behaviors of nanotube formed on the bone plate of Ti-6Al-4V alloy for dental use have been investigated. $TiO_2$ nanotubes were formed on the dental bone plates by anodization in $H_3PO_4$ containing 0.6 wt % NaF solution at $25^{\circ}C$. Electrochemical experiments were performed using a conventional three-electrode configuration with a platinum counter electrode and a saturated calomel reference electrode. Anodization was carried out using a scanning potentiostat (EG&G Co, Model 263A USA), and all experiments were conducted at room temperature. The surface morphology was observed using field emission scanning electron microscopy (FE-SEM) and energy dispersive x-ray spectroscopy(EDS). The corrosion behavior of the dental bone plates was examined using potentiodynamic test(potential range of -1500~2000 mV) in a 0.9% NaCl solution by potentiostat (EG&G Co, PARSTAT 2273. USA). The inner diameter of nanotube was about 150~180 nm with wall thickness of about 20 nm. The interspace of nanotube to nanotube was 50 nm. The passive region of the nanotube formed bone plates showed the broad range compared to non-nanotube formed bone plates. The corrosion surface of sample was covered with corrosion products.