• Journal of the Korea Institute of Building Construction
• /
• v.6 no.3 s.21
• /
• pp.75-82
• /
• 2006

This study investigates the influence of various blending factors on cement paste fluidity and find out the most effective evaluation method of cement paste flow, comparing flow test apparatuses such as ring flow(R-F), flow cone(F-C) and mini slump(M-S). A viscometer also measures the rheology coefficients to secure faithful numerical data. Firstly, series I examines cement paste, affected by several cement products and mineral admixture types in the range of W/B 40%, ordinary fluidity, and W/B 30%, high fluidity. In this series, the three types of cement product depended on companies, are randomly used and the mineral admixture, such as fly ash, blast furnace slag and silica fume, are incorporated in the cement paste, in response to the ratio of 10, 20, to 30%, respectively. In addition, series II studies various chemical admixture types, affecting the cement paste. This series is carried out with manufacturing companies and component types in the range of W/C 30%, high fluidity. For the manufacturing companies, randomly four products are used and for the component types, polycaboxylate, melamine, naphthalene and lignosulfonate type are chosen. Test results showed that in the fluidity test of cement paste considering various types of blending factors, R-F exhibited similar tendency with F-C and M-S. In the analysis of consistency curves measured by viscometer, the fluidity evaluation method using flow test apparatuses was significantly effective, except for the some of the low fluidity specimens. In conclusion of this study, R-F was the most convenient, faithful and effective fluidity evaluation method of cement paste.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.5
• /
• pp.643-649
• /
• 2018

Objective: POU class 1 homeobox 1 (POU1F1) mediates growth hormone expression and activity by altering transcription, eventually resulting in growth rate variations. Therefore, we aimed to identify chicken POU1F1 polymorphisms and evaluate the association between single nucleotide polymorphisms (SNPs) and growth-related traits, and logistic growth curve parameter traits (${\alpha}$, ${\beta}$, and ${\gamma}$). Methods: Three SNPs (M_1 to M_3) were used to genotype 585 $F_1$ and 88 $F_0$ birds from five Korean native chicken lines using a polymerase chain reaction-restriction fragment length polymorphism method. Results: Single marker analyses and traits association analyses showed that M_2 was significantly associated with body weight at two weeks, weight gain from hatch to 2 weeks, and weight gain from 16 to 18 weeks (p<0.05). M_3 was significantly associated with weight gain from 14 to 16 weeks and from 16 to 18 weeks, and asymptotic body weight (${\alpha}$) (p<0.05). No traits were associated with M_1. The POU1F1 haplogroups were significantly associated with weight gain from 14 to 16 weeks (p = 0.020). Linkage disequilibrium test and Haploview analysis shown one main haploblock between M_2 and M_3 SNP. Conclusion: Thus, POU1F1 significantly affects the growth of Korean native chickens and their growth curve traits.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1658-1663
• /
• 2015

To control the indoor humidity, humidifier is installed in an air handling unit. Up to now, foreign product made of glasswool has been widely used as a humidifying element. In this study, a new humidifying element made of cellulose and PET was tested, and the performance was compared with Glasdek element, which is made of glasswool. Mass transfer rates and pressure drops were measured from the element which was installed at the entrance of the suction-type wind tunnel. Results show that, $j_m$ and f factors of the new element are 33%~39% larger and 0%~51% smaller than those of Glasdek. Large water absorption capacity and the smoothness of the new element appear to be responsible for the large $j_m$ and small f factor. The mass transfer effectivenesses ($j_m/f^{1/3}$) of the new element are 36%~63% larger than those of Glasdek.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.1
• /
• pp.21-29
• /
• 2003

In this study, practical guidelines to check the possibility of some lateral movement of piled abutment were investigated. In these tests, both the depth of soft clay and the rate of embankment construction are chosen to examine the effect on lateral soil movements. The depth of soft clay layer varies from 5.2 m to 11.6 m, and the rate of embankment construction has two types : staged construction(1m/30days, 1m/15days) and instant construction. Various measuring instruments such as LVDTs, strain gauges, pressure cells, and pore pressure transducers are installed in designed positions in ordo. to clarify the soil - pile interaction and the short and long term behavior f3. piled bridge abutments adjacent to surcharge loads. The validity of the proposed guidelines by centrifuge test was compared with the observed performance by lateral movement index, F(Japan Highway Public Corporation) and modified I index(Korea Highway Corporation). Based on the results obtained, the critical values off and modified I, as a practical guidelines, are proposed as 0.03 and 2.0, respectively.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.131-134
• /
• 2002

The optimum design technology using combind F.E.M and eauivalent circuit is so fast and accurate that it can be applied to the optimum rotor design of an inverter-fed induction motor in high efficiency motor making industry. The optimum characteristics fer a rotor slot model of a 3 phase inverter-134 nduction motor was previously verified by a time-step F.E.M. In this paper, four verification models with the design variables near the optimum point are designed to chech whether the characteristics of a slot model presented is not less than those of the near models. The outputs of whole models are analyzed in a time-step Finite Element Method and compared in the experimental test. The economical and efficient selecting method of design variables fur the computer simulation and experimental test is presented in order to assure the optimum point.

• MALSORI
• /
• no.63
• /
• pp.47-66
• /
• 2007

This study aims at exploring the degree of phonetic similarity between Korean and Japanese vowels in terms of acoustic features by performing the speech production test on Korean speakers and Japanese speakers. For this purpose, the speech of 16 Japanese speakers for Japanese speech data, and the speech of 16 Korean speakers for Korean speech data were utilized. The findings in assessing the degree of the similarity of the 7 nearest equivalents of the Korean and Japanese vowels are as follows: First, Korean /i/ and /e/ turned out to display no significant differences in terms of F1 and F2 with their counterparts, Japanese /i/ and /e/, and the distribution of F1 and F2 of Korean /i/ and /e/ in the distributional map completely overlapped with Japanese /i/ and /e/. Accordingly, Korean /i/ and /e/ were believed to be "identical." Second, Korean /a/, /o/, and /i/ displayed a significant difference in either F1 or F2, but showed a great similarity in distribution of F1 and F2 with Japanese /a/, /o/, and /m/ respectively. Korean /a/ /o/, and /i/, therefore, were categorized as very similar to Japanese vowels. Third, Korean /u/, which has the counterpart /m/ in Japanese, showed a significant difference in both F1 and F2, and only half of the distribution overlapped. Thus, Korean /u/ was analyzed as being a moderately similar vowel to Japanese vowels. Fourth, Korean /${\wedge}$/ did not have a close counterpart in Japanese, and was classified as "the least similar vowel."

• Child Health Nursing Research
• /
• v.11 no.4
• /
• pp.427-435
• /
• 2005

Purpose: The purpose of this study was to identify the effects of hand acupuncture therapy on headaches in children. Method: A quasi experimental pre-test and post (1,2,3)-test design was used. Data were collected from March 2 to April 16 2001. Forty children were assigned to an experimental (20) or control group (20). The experimental group received Hand-Acupuncture therapy on the meridian point; A30, A31, A32, A33, E8, I2, M2, M3, M5, B25, B26, B27 for each 3 minutes, while the control group rested on a bed. Data were analyzed using the SAS program with $x^2$-test, t-test, repeated measured ANOVA, and ANCOVA. Result: In the experimental group, descriptive headache intensity (f=64.33, p=0.00), numeric headache intensity (F=74.69, 122.50, 7.52. p=0.00), and medication requirements ($x^2$=19.00, p=0.00) were significantly lower than those of the control group. Conclusion: These findings indicate that hand acupuncture therapy is effective for reduction of headaches. Therefore, hand acupuncture therapy can be considered an independent nursing intervention for reducing headaches in children.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.4
• /
• pp.1263-1274
• /
• 1996

In this paper, as elastic-plastic fracture toughness test under mixed mode loading was proposed using a single edge-cracked specimen subjected to bending moment(M), shearing force(F), and twisting moment(T). The J-integral of a crack in the specimen is expressed in the form J=$J_I$+ $J_II$$J_III$, where $J_I$, $J_II$ and $J_III$ are the components of mode I, mode II and mode III deformation, respectively. $J_I$, $J_II$ and $J_III$ can be estimated from M-$\theta$ ($\theta$;crack opening angle), F-U(U; crack shear displacement) and T-$\alpha$ ($\alpha$;crack twisting angle). In order to obtain the the M<-TEX>$\theta$, F-U and T-$\alpha$ diagram inreal time, a new deformaiton gage for mixed mode loading was proposed using the optical position sensing device(PSD). The elastic-plastic fracture toughness test was carried out with an aluminum alloy. The loading apparatus was designed and manufactured for this experiment. For the loading condition of the crack initatio in the mixed mode, the MMT -3(mode I+ mode II+ mode III) has the lowest values out of the all specimens. This implies that MMT-3 is possible of the crackinitation at lower load, if the specimen acts on together with the torque under the same loading condition. An elastic-plastic fracture toughness test using the PSD brings a successful experimentation in measuring the crack deformation(mode I+ mode II+ mode III).

• Journal of Animal Science and Technology
• /
• v.44 no.5
• /
• pp.633-642
• /
• 2002

Enteric colibacillosis has economically become an important disease of young animals as a result of increasing intensification of farrowing management. The objective of this experiment is to isolate fimbrial antigen from enterotoxigenic E. coli F41, to develop specific polyclonal IgY which can effectively neutralize or reduce the proliferation of pathogens in feed or living animal system, and to apply IgY technologies to animal industry. The results obtained were as follows: The molecular weight of the purified F41 antigen was 29,500 dalton on sodium dodecyl sulfate-polyacrylamide gels. Fimbrial antigen was confirmed by the western blot method. It was observed that after immunization the level of serum antibody titer of laying hen was shown in two weeks and gradually increased. The antibody titer in egg yolk appeared two weeks after it was shown in serum antibody. The titers of egg yolk antibody were gradually increased to the maximum level of 320,000 (antigen 50${\mu}g$/$m\ell$), 450,000 (antigen 200${\mu}g$/$m\ell$), and 320,000 (antigen 600${\mu}g$/$m\ell$). According to the results of specificity test by ELISA, the anti-F41 antibodies from chicken serum and egg yolk reacted only with ETEC F41 antigen. There was no cross reaction with other ETEC strains (K88, K99, and 987P). In vitro condition, as a result of antigen binding ability of yolk antibodies, bacterial concentration was rapidly decreased to $10^5$ CFU/$m\ell$ from $10^9$ CFU/$m\ell$ when 2${\sim}$4 mg/$m\ell$ of freeze dried WSF (water soluble fraction) was added.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.115-121
• /
• 2010

Purpose: The purpose of this study is to measure F-18 FDG with two different types of dose calibrator measuring radionuclide and radioactivity and investigate the effect of F-18 FDG on SUV (Standard Uptake Value) in human body. Materials and Methods: Two different dose calibrators used in this study are CRC-15 Dual PET (Capintec) and CRC-15R (Capintec). Inject 1 mL, 2 mL, 3 mL of F-18 FDG into three 2 mL syringes, respectively, and measure initial radioactivity from each dose calibrator. Then measure and record radioactivity at 30 minute interval for 270 minutes. According to the initial radioactivity, linearity between decay factor driven from radioactive decay formula and the values measured by dose calibrator have been analyzed by simple linear regression. Fine linear regression line optimizing values measured with CRC-15 through regression analysis on the basis of the volume of which the measured value is close to the most ideal one in CRC-15 Dual PET. Create ROI on lung, liver, and region part of 50 persons who has taken PET/CT test, applying values from linear regression equation, and find SUV. We have also performed paired t-test to examine statistically significant difference in the radioactivity measured with CRC-15 Dual PET, CRC-15R and its SUV. Results: Regression analysis of radioactivity measured with CRC-15 Dual PET and CRC-15R shows results as follows: in the case 1 mL, the r statistic representing correlation was 0.9999 and linear regression equation was y=1.0345x+0.2601; in 2 mL case, r=0.9999, linear regression equation y=1.0226x+0.1669; in 3 mL case, r=0.9999, linear regression equation y=1.0094x+0.1577. Based on the linear regression equation from each volume, t-test results show significant difference in SUV of ROI in lung, liver, region part in all three case. P-values in each case are as follows: in 1 mL case, lung, liver and region (p<0.0001); in 2 mL case, lung (p<0.002), liver and region (p<0.0001); in 3 mL case, lung (p<0.044), liver and region (p<0.0001). Conclusion: Radioactivity measured with CRC-15 Dual PET, CRC-15R, dose calibrator for F-18 FDG test, do not show difference correlation, while these values infer that SUV has significant differences in the aspect of uptake in human body. Therefore, it is necessary to consider the difference of SUV in human body when using these dose calibrator.