• 제어로봇시스템학회논문지
• /
• 제12권12호
• /
• pp.1249-1255
• /
• 2006

This paper presents a constant power control logic for perfect starting a microtubine in vehicle. Under extremely low temperature, performance of the start-up system is severely dropped than that of room temperature because of increasing of load of mechanical parts including engine core and drop of the lead-acid battery capacity. Unfortunately, performance drop of lead-acid battery makes severe problems that cause a malfunction of fuel and lubrication system and power fail of digital devices. So we propose the new start-up logic by constant output power control of lead-acid battery using PWM inverter controller for preventing above problems and keeping good performance of start-up system for microturbine. Also, we prove usefulness of new start-up logic through experimental results under $-32^{\circ}C$ ambient temperature.

• KSTLE International Journal
• /
• 제7권2호
• /
• pp.35-44
• /
• 2006

Turbocharger bearings are under the circumstance of high temperature, moreover rotated at high speed. It is necessary to be designed overcoming the high temperature. So the type of oil inlet port, the inlet oil temperature and the sort of engine oil should be designed, controlled and selected carefully in order to reduce the bearing inside temperature. In this study, the influence of aerated oil on a high-speed journal bearing is also examined by using the classical thermohydrodynamic lubrication theory coupled with analytical models for viscosity and density of air-oil mixture in fluid-film bearing. Convection to the walls and mixing with supply oil and re-circulating oil are considered. The considered parameters for the study of bubbly lubrication are oil inlet port's type, oil aeration level and shaft speed. It is found that the type of oil inlet ports and shaft speed play important roles in determining the temperature and pressure, then the friction and load of journal bearing at high speed operation. Also, the results show that, under extremely high shaft speed, the high shear effects on aerated oil and the high temperature effects are canceled out each other. So, the bearing load and friction show almost no difference between the aerated oil and pure oil.

• Tribology and Lubricants
• /
• 제23권5호
• /
• pp.207-218
• /
• 2007

Turbocharger bearings are under the circumstance of high temperature, moreover rotated at high speed. It is necessary to be designed overcoming the high temperature. So the type of oil inlet port, the inlet oil temperature and the sort of engine oil should be designed, controlled and selected carefully in order to reduce the bearing inside temperature. In this study, the influence of aerated oil on a high-speed journal bearing is also examined by using the classical thermohydrodynamic lubrication theory coupled with analytical models for viscosity and density of air-oil mixture in fluid-film bearing. Convection to the walls and mixing with supply oil and re-circulating oil are considered. The considered parameters for the study of bubbly lubrication are oil inlet port's type, oil aeration level and shaft speed. It is found that the type of oil inlet ports and shaft speed play important roles in determining the temperature and pressure distribution, then the friction in a journal bearing at high speed operation. Also, the results show that, under extremely high shaft speed, the high shear effects on aerated oil and the high temperature effects are canceled out each other. So, the bearing load and friction show almost no difference between the aerated oil and pure oil.

• 한국전산구조공학회논문집
• /
• 제15권2호
• /
• pp.219-235
• /
• 2002

이 논문에서는 지하식 LNG 저장탱크의 설계조건 변화에 따른 구조거동에 대한 사례연구를 다루었다. 지하식 LNG 저장탱크의 설계에 있어서, 치적의 탱크 형상과 치수를 결정하는 것은 다양한 하중조건과 이들의 하중조합 하에서 더욱 향상된 구조거동을 위해 매우 중요하다. 저장 탱크의 설계단계에서 유지단계에 이르기까지 구조거동에 영향을 미치는 주요인자에 대한 분석과 평가가 이루어졌으며, 이러한 매개변수연구를 토대로 한 결과에 근거하여 지하식 LNG 저장탱크의 보다 합리적인 설계에 대한 기초자료를 제안하였다.

• Tribology and Lubricants
• /
• 제34권4호
• /
• pp.138-145
• /
• 2018

Elliptical bearings are widely used for large steam turbines owing to their excellent load carrying capacity and good dynamic stability. Power loss in bearings is an extremely important parameter, especially for high turbine capacities. Optimization of operation conditions and design variables such as bearing clearance and bearing length can reduce the power loss in elliptical bearings. Although changes in the oil supply method have served to increase the efficiency of the tilting pad journal bearing, it has not explicitly improved elliptical bearings. In this study, we verify the static characteristics of an elliptical bearing by changing the direction of oil supply. We evaluate the bearing power loss and bearing metal temperature, and compare the bearing performance and reliability in different test cases. The direction of oil supply is $90^{\circ}$ (9 o'clock) and $270^{\circ}$ (3 o'clock) when the rotor rotates in a counterclockwise direction. We use an elliptical bearing with an inner diameter and active length of 220.30 and 110.00 mm, respectively. Bearing power loss and bearing metal temperatures are measured and evaluated by rotor rotational speed, oil flow rate, and bearing load. The results reveal a 20 reduction in the power loss when the direction of oil supply is 90. Furthermore, the oil film on the upper part of the bearing has a high temperature when the direction of oil supply is $90^{\circ}$. In contrast, when the direction of oil supply is $270^{\circ}$, the oil film on the upper part of the bearing is relatively cold.

• 한국산업융합학회 논문집
• /
• 제10권4호
• /
• pp.213-219
• /
• 2007

Glass-to-metal contact should be prevented in the design of any structural glass component. Because glass is extremely brittle and will fracture readily if even a small point load is applied. If the assembly includes a glass component supported by metallic structure, designers should provide a pliable interface of some kind between the two parts. But there happens high demand of glass-to metal contact in semiconductor industries due to adoption of dry cleaning process as one of the good solution to reduce running cost - carry out equipments cleaning with high corrosive and etching gas such as CF4 with keeping process temperature as the same as high service temperature. Therefore the quartz glass have to be received compression by direct contact with metal as the form of weight itself and vacuum pressure and fatigue by vibrations caused by process during the process. In this paper investigation will be carried out on fracture behavior of quartz glass contacted with metal directly under local load and fatigue given by process vibration with apparatus which can give $lox{\backslash}cal$ load and vibration through PZT ceramics to give guideline to prevent unintended fracture of quartz glass.

• 대한인간공학회지
• /
• 제36권3호
• /
• pp.169-181
• /
• 2017

Objective: The aim of this study was to explore the influence of outdoor weather conditions on subjective responses during physical activity. Background: The largest difference between indoor and outdoor conditions is the existence of the sun. The heat load from the sun has an influence on the heat gain of the human body and the intense degree of solar radiation affected thermal comfort. Method: Thirty eight people were exposed to a range of climatic conditions in the UK. Weather in England does not have extremely hot and cold temperature, and the current study was conducted under warm (summer and autumn) and cool (spring and summer) climates. Measurements of the climate included air temperature, radiant temperature (including solar load), humidity and wind around the subjects. Subjective responses were taken and physiological measurements included internal body temperature, heart rate and sweat loss. Results: This study was conducted under four kinds of environmental conditions and the environmental measurement was performed in September, December, March, and June. The values for sensation, comfort, preference, and pleasantness about four conditions were from 'neutral' to 'warm', from 'not uncomfortable' to 'slightly comfortable', from 'slightly cooler' to 'slightly warmer', and from 'neither pleasant nor unpleasant' and 'slightly unpleasant', respectively. All subjective responses showed differences depending on air temperature and wind speed, and had correlations with air temperature and wind speed (p<0.05). However, subjective responses showed no differences depending on the radiant temperature. The combined effects of environmental parameters were showed on some subjective responses. The combined effects of air temperature and radiant temperature on thermal sensation and pleasantness were significant. The combined effects of metabolic rate with air temperature, wind speed and solar radiation respectively have influences on some subjective responses. In the case of the relationships among subjective responses, thermal sensation had significant correlations with all subjective responses. The largest relationship was shown between preference and thermal sensation but acceptance showed the lowest relationship with the other subjective responses. Conclusion: The ranges of air temperature, radiant temperature, wind speed and solar radiation were $6.7^{\circ}C$ to $24.7^{\circ}C$, $17.9^{\circ}C$ to $56.6^{\circ}C$, $0.84ms^{-1}$ to $2.4ms^{-1}$, and $123Wm^{-2}$ to $876Wm^{-2}$ respectively. Each of air temperature and wind speed had significant relationships with subjective responses. The combined effects of environmental parameters on subjective responses were shown. Each radiant temperature and solar radiation did not show any relationships with subjective responses but the combinations of each radiant temperature and solar radiation with other environmental parameters had influences on subjective responses. The combinations of metabolic rate with air temperature, wind speed and solar radiation respectively have influences on subjective responses although metabolic rate alone hardly made influences on them. There were also significant relationships among subjective responses, and pleasantness generally showed relatively high relationships with comfort, preference, acceptance and satisfaction. Application: Subjective responses might be utilized to predict thermal stress of human and the application products reflecting human subjective responses might apply to the different fields such as fashion technology, wearable devices, and environmental design considering human's response etc.

• Journal of Astronomy and Space Sciences
• /
• 제16권2호
• /
• pp.177-190
• /
• 1999

An absorbed heat-flux method for ground simulation of on-orbit thermal environment of satellite is addressed in this paper. For satellite ground test, high vacuum and extremely low temperature of deep space are achieved by space simulation chamber, while spatial environmental heating is simulated by employing the absorbed heat-flux method. The methodology is explained in detail with test requirement and setup implemented on a satellite. Developed heat-load control system is presented with an adjusted PID-control logic and the system schematic realized is shown. A practical and successful application of the heat simulation method to KOMPSAT(Korea Multi-purpose Satellite)thermal environmental test is demonstrated, finally.

• Composites Research
• /
• 제20권5호
• /
• pp.64-69
• /
• 2007

복합재료의 모재지배 물성은 온도나 습도와 같은 환경에 의해서 크게 저하되기 때문에 고온 다습한 환경에서 운용되는 UAV의 일체형 복합재 연료탱크를 설계함에 있어 이러한 유해환경 요소들을 반드시 고려하여야 한다. 본 연구에서는 스마트무인기에 사용될 일방향 복합재료 USN 175B와 직조 복합재료인 WSN3K에 대해서 $90^{\circ}C$에서 담수 침수 실험을 수행하여 모재의 수분 흡수량이 포화될 때까지 노화시킨 후 $74^{\circ}C$의 고온환경에서 인장 및 평면 전단 시험을 수행하였다. 실험 결과 모재 지배적 물성에서 극심한 물성 저하현상이 나타남을 확인하였다. 구조물이 받는 하중의 다양성을 고려하기 위해서 반최적화 기법을 도입하였다. 하중 컨벡스 모델과 안정성 경계를 비교하여 최악의 하중 상황을 판별하였다. 안정성 경계는 일체형 복합재 연료탱크에 저하된 물성을 적용하여 유한요소 해석을 수행하여 얻었다. 이를 통해 최악의 하중상황은 수직상승모드일 때 임을 확인하였다.

• 마이크로전자및패키징학회지
• /
• 제24권1호
• /
• pp.57-65
• /
• 2017

모바일 기기 내부에 있는 전자부품들은 반도체 칩이나 그 밖의 여러 가지 재료로 구성되어 있다. 이러한 전자부품들은 매우 얇고, 구성된 재료들은 다양한 열팽창 계수를 가지고 있으므로 온도 변화나 외부 하중에 의해서 쉽게 굽힘이 일어난다. 그림자 무아레 방법은 비접촉으로 전체 영역에 걸친 면외변위를 측정하는 광학적 방법이지만 측정 감도를 $50{\mu}m/fringe$ 이내로 하기 어려워서 반도체 패키지의 굽힘변형을 측정하기에는 적당하지 않은 면이 있었다. 본 논문에서는 그림자 무아레 기법의 여러 실험조건들을 최적화하여 $25{\mu}m/fringe$의 향상된 감도를 갖는 측정 방법을 구현하였다. 또한 이로부터 위상이동에 의해 기록되는 4장의 그림자 무늬를 영상 처리하여 감도가 4배 향상된 그림자 무늬를 얻어내고 이를 스마트폰의 소형 전자부품들에 적용하여 온도변화에 따라 발생하는 굽힘 변위를 $5{\mu}m/fringe$의 고감도로 측정하였다.