• 제목/요약/키워드: Extraction efficiency

검색결과 1,166건 처리시간 0.026초

Optimization of Solid Phase Extraction Method for Quantitative Analysis of Perfluorooctanoic Acid in Serum using Liquid Chromatography-Tandem Mass Spectrometry

  • Lee, Hyun-Seok;Yim, Yong-Hyeon
    • Mass Spectrometry Letters
    • /
    • 제5권1호
    • /
    • pp.30-33
    • /
    • 2014
  • A solid phase extraction (SPE) method was optimized for the quantitative analysis of perfluorooctanoic acid (PFOA) in serum using hydrophilic-lipophilic balance SPE and LC-MS/MS. Fetal bovine serums spiked with $^{13}C_8$-PFOA before or after SPE were used as test samples for evaluation of the SPE efficiency. Simultaneous evaluation of matrix effects and absolute SPE recovery for $^{13}C_8$-PFOA in serum using different sample pre-treatments and SPE conditions allowed optimization of SPE process efficiency with minimal matrix effect and decent SPE recovery. Introduction of protein precipitation as a sample pre-treatment procedure for serum samples before SPE generally decreased matrix effect in LC-MS/MS analysis and provided more stable recovery of PFOA.

태양열 온수 저장조의 성층 온수 추출에 관한 연구 (Thermally Stratified Hot Water Extraction)

  • 박이동;정운철;성상우
    • 태양에너지
    • /
    • 제11권2호
    • /
    • pp.34-40
    • /
    • 1991
  • Thermal stratification enhancement for the higher extraction efficiency of hot water storage tank was experimentally studied with transparent fiber glass cylindical tank($350{\ell}$, D=516mm, H=1680mm). Height to diameter ratio (H/D =1,2,3), flow rate(Q= 8,10,12LPM), inlet-outlet temperature differences(${\Delta}T=20,25,30^{\circ}C$), and geometry of inlet-outlet port were the parameters. In particular, three kind of distributors were used for geometry of inlet-outlet port. As a result, it was possible to get extraction efficiency of 95% by using the distributor having variable diameter but keeping a constant diameter of perforation. So it is recommendable to design the distributor so that the main pipe decrease in diameter toward the dead end.

  • PDF

유기금속화학증착 분진(MOCVD dust)을 이용한 갈륨 함유 고순도 수용액 제조 연구 (Fabrication of High Purity Ga-containing Solution using MOCVD dust)

  • 이덕희;윤진호;박경수;홍명환;이찬기;박정진
    • 자원리싸이클링
    • /
    • 제24권4호
    • /
    • pp.50-55
    • /
    • 2015
  • 본 연구에서는 LED 칩 제조를 위해 이용되는 유기금속화학증착(MOCVD) 장비에서 발생하는 분진(dust)으로부터 용매추출을 통해 고순도 갈륨(Ga) 함유 수용액을 회수하는 연구를 수행하였다. 추출제 종류, 추출제의 농도 변화에 대한 연구를 통해 Ga 추출에 효과적인 추출제를 선정하고자 하였으며 다단계 추출/역추출 공정을 통해 추출 효율을 향상시켜 고순도 Ga 수용액을 제조하였다. 선행연구에서 원료에 대한 분석을 바탕으로 Ga의 추출 및 분리를 위해 PC88A, DP-8R, Cyanex 272 추출제 중 Cyanex 272를 선택하였으며 1.5M일 때 43.8%의 효율이 나타났다. 다단계 추출을 통해 Ga의 추출 효율은 83%까지 상승하였으며 0.1 M HCl을 이용한 역추출 공정으로 불순물이 없는 5N급 고순도 Ga 수용액을 제조할 수 있었다.

고성능 액체 크로마토그래피를 이용한 고삼 중의 oxymatrine 분석에 관한 연구 (Determination of oxymatrine in Sophora Radix by High Performance Liquid Chromatography)

  • 양승권;윤영자;남궁미옥
    • 분석과학
    • /
    • 제17권4호
    • /
    • pp.289-294
    • /
    • 2004
  • 고성능 액체 크로마토그래피를 이용하여 고삼 중의 oxymatrine을 분석하였다. acetonitrile을 포함하는 완충용액과 $C_{18}$컬럼을 이용한 역상 크로마토그래피를 수행하였다. Oxymatrine의 분리는 215 nm에서 UV흡수가 관측되었다. 고삼 중의 oxymatrine의 추출은 다양한 용매와 다양한 추출방법을 사용한 결과, 마쇄한 고삼의 최적의 추출 효율은 $80^{\circ}C$에서 50% ethanol로 5시간 동안 환류가열 하였을 때 가장 높은 효율을 보였다. 대부분의 추출 방법은 복잡한 전처리를 필요로 하지만, 본 연구에서는 승화 추출법으로 복잡한 전처리를 제외시킨 추출법을 고안하였다. 승화 추출은 높은 진공 ($1{\times}10^{-3}$ torr) 과 높은 온도 ($200^{\circ}C$)에서 수행되었다. 승화 추출법을 사용한 추출 효율은 다른 추출 방법들과 비교해서 전처리 과정을 거치지 않은 장점은 있었으나 추출 효율이 좀 낮았다.

Optimising the Extraction of Bacteria, Heterotrophic Protists and Diatoms, and Estimating Their Abundance and Biomass from Intertidal Sandy Sediments

  • Lee, Won-Je;Patterson, David J.
    • Journal of the korean society of oceanography
    • /
    • 제37권2호
    • /
    • pp.58-65
    • /
    • 2002
  • The study of microbial communities in sediments is impaired by the lack of reliable extraction methods. This study reports on the efficiency of recovery of a method for extracting bacteria, protists and diatoms from sandy sediments using a modified decant/fix method. The best extractions were achieved after fixation with a microtubule stabilising fixative and subsequent sonication for 80 seconds. We estimate that the efficiencies of recovery of bacteria and mixed heterotrophic flagellates were $96.4{\pm}3.5\%$ and $96.9{\pm}4.6\%$, respectively. Diatoms were recovered with an efficiency of 38-83% and varied considerably from species to species. This study suggests that the decant/fix method is effective in extracting small cells such as bacteria and heterotrophic flagellates, and that the efficiency of recovery of the method varies due to cell length and different types of organisms. When microbial carbon biomass had been underestimated by up to 32%, with much of that relating to larger cells such as microalgae and ciliates. We note that the corrected abundances may be still a subset of the total numbers present.

Stripping of Fe(III) from the Loaded Mixture of D2EHPA and TBP with Sulfuric Acid Containing Reducing Agents

  • Liu, Yang;Nam, Sang-Ho;Lee, Manseung
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권7호
    • /
    • pp.2109-2113
    • /
    • 2014
  • Solvent extraction of Fe(III) from chloride solution by using a mixture of D2EHPA (Di-(2-ethylhexyl)-phosphoric acid) and TBP (Tri-butyl phosphate) and the reductive stripping of Fe(III) from the loaded organic were investigated. Quantitative extraction of Fe(III) from the solution (Fe concentration = 90 g/L) was accomplished in two cross-current extraction stages by using the mixture of D2EHPA and TBP. In order to facilitate the stripping efficiency, a reductive stripping method was employed by using $H_2SO_3$ or $Na_2SO_3$ as a reducing agent. The addition of $H_2SO_4$ into reducing agents led to improvement in the stripping efficiency while high concentration acid would suppress it. Both of the mixtures of $H_2SO_4+H_2SO_3$ and $H_2SO_4+Na_2SO_3$ showed good efficiency for the stripping of Fe(III), while the latter was recommended as the stripping solution based on the economics and experimental condition.

Ti-Al 반사막을 이용한 405 nm LED의 광추출 효율 향상 (Enhancement in the light extraction efficiency of 405 nm light-emitting diodes by adoption of a Ti-Al reflection layer)

  • 김창연;권새롬;이두형;노승정
    • 한국진공학회지
    • /
    • 제17권3호
    • /
    • pp.211-214
    • /
    • 2008
  • Metal organic chemical vapor deposition (MOCVD)를 이용하여 사파이어 기판 위에 405 nm의 파장을 갖는 GaN light-emitting diode (LED)를 제작하였다. LED의 InGaN 활성층에서 생성되어 칩의 후면으로 향하는 광자를 전면으로 반사시키기 위하여, 사파이어 기판 후면에 반사막을 증착하였다. 반사막으로는 Al을 사용하였으며, 사파이어 기판에 대한 Al 박막의 접착력을 개선하기 위하여 사파이어 기판 후면에 Ti를 먼저 증착한 후에 Al을 증착하였다. Ti-Al 반사막을 채용한 결과, 광추출 효율이 52 % 향상되었다.

마이크로웨이브 추출조건에 따른 곰취 추출물의 총 폴리페놀 함량 및 항산화작용의 변화 (Changes of Total Polyphenol Content and Antioxidant Activity of Ligularia fischeri Extracts with Different Microwave-Assisted Extraction Conditions)

  • 권영주;김공환;김현구
    • 한국식품저장유통학회지
    • /
    • 제9권3호
    • /
    • pp.332-337
    • /
    • 2002
  • 마이크로웨이브 추출방법과 환류 냉각 추출방법을 비교한 결과, 물과 에탄올의 혼합용매로 추출한 경우 마이크로웨이브 추출 방법에 의하여 추출시간을 단축시키면서 환류 냉각 추출 방법에서와 같은 수준의 가용성 고형분 및 총 폴리페놀 함량을 갖는 곰취 추출물을 얻을 수 있었다. 마이크로웨이브 추출시 최적 마이크로웨이브 에너지는 120∼150 W 였고 추출시간은 4∼8분이 적당하였다. 추출에 사용한 용매들 가운데 에탄올, 메탄올 보다 물 그리고 물과 에탄올 또는 메탄올 혼합용매를 사용한 추출물의 가용성 고형분, 총 폴리페놀 함량 및 항산화 효과가 높은 것으로 나타났다.

Optimization of Isoflavone Extraction from Soy Germ - Research Note-

  • Bae, Sang-Moon;Jang, Chan-Ho;Kim, Jang-Hoon;Lim, Hyun-Ae;Kim, Joo-Ryong;Kim, Jeong-Hwan;Kim, Jong-Sang
    • Preventive Nutrition and Food Science
    • /
    • 제10권3호
    • /
    • pp.290-293
    • /
    • 2005
  • Soy isoflavones have drawn much attention due to their potential to prevent breast and prostate cancers, osteoporosis, heart disease, and other postmenopausal symptoms. Soy germ is one of the richest sources of isoflavones, and thus has good potential to be used as the ingredient of health foods. This study examined the extraction rate of isoflavones from soy germ at various conditions. After the effect of extraction temperature and duration on isoflavones extraction from soy germ was examined, the optimum concentration of ethanol as extraction solvent was determined. When ethanol concentration was fixed at $60\%\;(v/v)$, the maximum isoflavone extraction was achieved at 2 hrs and $30^{\circ}C$. Among various concentrations of ethanol tested, $80\%\;(v/v)$ ethanol showed the highest extraction efficiency. In conclusion, the maximum extraction of isoflavones was obtained using $80\%\;(v/v)$ ethanol as a solvent, at $30^{\circ}C$ of temperature, and 2 hrs of extraction time.