• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.39 no.6
• /
• pp.441-446
• /
• 2006

Volatile flavor compounds in meat of the blue crab Portunus trituberculatus were compared using vacuum simultaneous steam distillation-solvent extraction (V-SDE) and solid phase microextraction (SPME)/ gas chromatography (GC)/ mass selective detection (MSD) methods. A total of 100 volatile flavor compounds were identified by both methods: 77 by V-SDE and 59 by SPME. These compounds were composed of 17 aldehydes, 12 ketones, 19 alcohols, 5 esters, 4 sulfur-containing compounds, 6 nitrogen-containing compounds, 23 aromatic compounds, 6 hydrocarbons, 2 terpenes, and 6 miscellaneous compounds. Although more compounds were detected using V-SDE than using SPME, the levels of all groups detected, except esters, were higher using SPME than using V-SDE. In addition to trimethylamine, aldehydes, and aromatic compounds, the S- and N-containing compounds with low thresholds are thought to have positive roles for flavors in the meat of the blue crab.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.3
• /
• pp.45-50
• /
• 1996

Wood chips of oak(Quercus mongolica) and larch(Larix leptolepis) were treated with low pressure steaming explosion. Main components of exploded wood were separated with hot water and methanol extraction. Crude lignin separated from those extractives were purified and those chemical characteristics were investigated. And also, lignin adhesive was prepared from crude lignin and studied those chemical characteristics. The results can be summarized as follows ; 1. The purified lignin by Bj$\ddot{o}$kman's method from crude lignin is about 30% in exploded oak wood and is about 11% in exploded larch wood as a low amount. 2. The phenolic hydroxyl groups in the purified lignins are little higher than those of MWL and molecular weight distributions of the purified lignins are some lower than that of MWL. 3. Alkaline nitrobenzene oxidation products are very low in the clude lignin but those are increased in the purified lignin 4. The gravity of lignin resins(1.15 and 1.13) are a little lower than that of phenol resin(1.16) and the compressive shearing strength of lignin resins are higher than those of phenol resin.

• Applied Biological Chemistry
• /
• v.32 no.2
• /
• pp.143-147
• /
• 1989

The volatile compounds of McIntosh apples were separated and identified at the stage of climacteric maximum. 21 compounds were identified from head space method and classes of that were 13 kinds of esters, 6 of alcohols, an aldehyde and a ketone. From simultaneous steam distillation-extraction method, 37 compounds were identified and classes of that were 20 kinds of esters, 14 of alcohols, 2 of aldehydes and a ketone. Esters were the most abundant flavor component in the both methods and next was alcohols.

• Food Science and Biotechnology
• /
• v.16 no.2
• /
• pp.290-293
• /
• 2007

Cassumunar ginger (Zingiber montanum Roxb.) was grown in the experimental field at the Department of Horticulture, Kasetsart University, Thailand. The antioxidant activity and volatile oil content of rhizomes of varying age were measured. Antioxidant activity as determined using the DPPH (diphenyl-2-picrylhydrazyl) method differed significantly between samples of different ages. Antioxidant activity and rhizome age were positively correlated, with 22-month old rhizomes showing the highest radical scavenging activity (79.19%). Volatile oil was obtained by steam distillation of fresh rhizomes. The extraction yield of volatile oil was highest in l6-month old rhizomes (13.02 mL/kg). GC-FID data indicated the presence of three major compounds, sabinene, terpinen-4-ol and (E)-1-(3',4'-dimethylphenyl) butadiene (DMPBD), however none of the major components were correlated with the age of rhizome.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.6
• /
• pp.719-724
• /
• 1992

Volatile components in Korean salt-fermented anchovy were analyzed by simultaneous steam distillation-solvent extraction/gas chromatography/mass spectrometry. Seventy-three volatile compounds were detected in sample. Among these, 58 compounds were positively identified and were composed mainly of aldehydes, ketones, alcohols, nitrogen-containing compounds, esters, sulfur-containing compounds, furans and miscellaneous compounds. The amounts of aldehydes was the highest in flavor compounds detected in sample and next followed by alcohols, furans, esters and ketones. In particular, the following high ratios were observed : 3-methylbutanal, 1-penten-3-ol, ehtylacetate, 2-ethylfuran.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.2
• /
• pp.225-231
• /
• 1994

As the way of mass process of red pepper, extraction of oleoresin, which is labile during distribtuion and long-term storage, is alternative way to minimize markdown of red pepper quality. Changes of carotenoid pigments in modified oleoresin during cooking at high temperature were investigated. Dried red peperwas milled to 100 mesh of size particle and oily compounds were extracted by reduced pressure steam distillation. The rest part was reetracted and concentrated. The extracts were combined . The same volume of water and 4 % of polyglycerol condensed ricinoleate (PGDR) were added to the combined extract, and emulsified to make oleroesin. Capsanthin among dried red pepper, was the most abundant carotenoid (97.80mg%) followed by $\beta$ -cartoene, cryptoxanghin ,violaxanthin, crypotocapsin, and capsorubin. Oleoresin is acquiesce in the same order of raw red pepper. Transmittal of color components from raw red pepper to oleroresin was over 85% in cryptoxanthin, crytocapsin, and $\beta$ -carotene, over 70% in capsolutein and hydroxycapsolutein, and under 50% in antheraxanthin and mutatoxanthi Crytocapsin cryptoxanthin, an capsorubin in oleoresin red pepper were remained 72.1, 51.8 and 25.25, respectively, after cooking for 5hours at10$0^{\circ}C$. Color compounds were unsteady by cooking , About 90% of color compounds were destroyed by 3 hours cooking at 15$0^{\circ}C$. But, they were more thermostable under nitrogen circumstance than air one.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2664-2669
• /
• 2008

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damange, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle-installed downstream of the high pressure turbine extraction stream line- inside number 5A and 5B feedwater heaters. At that point, the extracted steam from the high pressure turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows in reverse direction after impinging the impingement baffle, the shell wall of the number 5 high pressure feedwater heater may be affected by flow-accelerated corrosion. This paper describes operation of experience and numerical analysis composed similar condition with real high pressure feedwater heater. This study applied squared, curved and new type impingement baffle plates to feedwater heater same as previous study. In addition, it shows difference of pressure distribution and value between single phase and two phase based on experience and numerical analysis.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.9
• /
• pp.483-495
• /
• 2009

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damange, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle-installed downstream of the high pressure turbine extraction stream line-inside number 5A and 5B feedwater heaters. At that point, the extracted steam from the high pressure turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows in reverse direction after impinging the impingement baffle, the shell wall of the number 5 high pressure feedwater heater may be affected by flow-accelerated corrosion. This paper describes operation of experience and numerical analysis composed similar condition with real high pressure feedwater heater. This study applied squared, curved and new type impingement baffle plates to feedwater heater same as previous study. In addition, it shows difference of pressure distribution and value between single phase and two phase based on experience and numerical analysis.

• Applied Biological Chemistry
• /
• v.40 no.5
• /
• pp.451-454
• /
• 1997

An attempt was made in this study to analyze volatile flavor components of fresh and odorless garlic (Allium sativum L.), Essential oils in fresh garlic and odorless garlic were isolated by a simultaneous steam distillation and extraction(SDE) method using n-pentane/diethy ether as solvent. A total of 21 and 22 components were identified by GC/MS from the essential oils of fresh garlic and odorless garlic, respectively. Diallyl trisulfide, diallyl disulfide and methyl allyl disulfide were found to be major volatile flavor components in fresh garlic and odorless garlic. By the preparation of ordorless garlic, 77.5% of diallyl trisulfide, 15.0% of diallyl disulfde, 72% of methyl allyl disulfide, and 78.4% of allyl thiol components in fresh garlic were lost. Eleven compounds including 2-vinyl-4H-1,3-dithiin, eugenol and 2-methoxy-4-vinyl-phenol were identified in odorless garlic, but not m fresh garlic.

• Applied Biological Chemistry
• /
• v.38 no.6
• /
• pp.546-548
• /
• 1995

An attempt was made to determine the volatile flavor components of Auricularia polytricha mushroom. Essential oils from the dried mushroom were isolated by a simultaneous steam distillation-extraction(SDE) method using diethyl ether as a solvent. Total 30 components were identified bt GC-MS from the in essential oils including 11 acids, 10 alcohols, 5 aldehydes, 3 ketons, 1 other components. The major volatile components were heaxadecanoic acid(16.74%), benzeneethanol(7.77%), pentadecanoic acid(7.59%), dihydro-5-penhtyl-2-(3H)-furanone acid(4.28%), tetradecanoic acid(3.37%), pentanoic acid(3.38%) and 1-octen-3-ol(1.26%).