• 한국전기전자재료학회논문지
• /
• 제18권1호
• /
• pp.62-67
• /
• 2005

Recently, polymer insulators that are used for high voltage applications have some advantages such as light weight, small size, vandalism resistance, hydrophobicity and easy making process. During outdoor service of polymer insulators, the surface of the insulating material is frequently subjected to moisture and contamination that lead to dry band arcing. Their tracking resistance, erosion resistance, end sealing and shed design are very important because dry band arcing causes degradation of polymer surface. Aging test to estimate life property of polymer insulator is executed through several international standard such as IEC 61109 and CEA tracking wheel test, but is not getting clear conclusion yet. There are two methods in the diagnosis method of polymer insulator such as off-line and on-line. The diagnosis methods in off-line are external condition analysis by the eye, contaminant analysis on surface, surface analysis, pollution withstand voltage test, power frequency flashover voltage test, lightning impulse flashover test, tensile fracture load test and flexural load test. Polymer material is also investigated it's tracking resistance by adding surface active agent in IEC 587. In this paper, the tracking performance of polymer insulator with salt solution which is added surface active agent. The diagnosis of insulator sample has been analyzed by leakage current and visual examination, STRI guide and thermal image camera.

• 문화기술의 융합
• /
• 제10권2호
• /
• pp.505-510
• /
• 2024

철도 레일은 차륜과 레일의 접촉면인 레일 표면에서 구름 접촉 피로 균열이 상시 발생할 수 있는 조건이기 때문에 균열의 상태를 철저히 점검하고 절손을 방지하기 위한 정밀한 점검 및 진단이 필요하다. 최근 궤도 시설의 성능 평가에 대한 세부 지침에서는 궤도 성능평가를 위한 방법과 절차에 관한 필요사항을 제시하고 있다. 그러나 레일 표면 손상을 진단하고 등급을 산정하는 것은 주로 외관 조사(육안 조사)에 의존하며, 이는 점검자의 주관적인 판단에 따른 정성적인 평가에 의존할 수밖에 없는 실정이다. 따라서 본 연구에서는 Fast R-CNN을 사용하여 레일 표면 결함 검출에 대한 딥러닝 모델 연구를 수행하였다. 레일 표면 결함 이미지의 데이터 세트를 구축한 후, 모델을 테스트하였다. 딥러닝 모델의 성능평가 결과에서 mAP가 94.9%로 나타났다. Fast R-CNN의 균열 검출 효과가 높기 때문에 이 모델을 사용하면 레일표면 결함을 효율적으로 식별할 수 있을 것으로 판단된다.

• 한국정보통신학회논문지
• /
• 제12권10호
• /
• pp.1897-1902
• /
• 2008

영상에 나타난 콘크리트 표면의 균열은 그 획득 과정에서 빛이나 외부환경에 의해 훼손되는 경우가 발생한다. 또한 콘크리트 표면이 고르지 않고 균열과 표면의 명암도 차이가 거의 없기 때문에 정확한 균열을 검출하기 어렵다. 따라서 본 논문에서는 콘크리트 표면 영상을 밝기에 따라 여러 영역으로 구분하기 위해 ART2 기반 양자화를 적용한다. 양자화된 영역에서 균열과 잡음의 분포를 조사하여 균열과 잡음이 같이 존재하는 영역에서는 잡음 제거 과정을 수행한 후, 균열 후보 영역을 추출하고 균열 후보 영역에서 형태학적인 정보를 이용하여 잡음을 제거하여 최종 균열 영역을 검출한다. 실제 콘크리트 표면 균열 영상을 대상으로 실험 한 결과, 제안한 방법이 기존의 방법보다 콘크리트 표면의 밝은 영역에서 균열이 비교적 정확히 검출되는 것을 확인하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1999년도 추계학술발표회 초록집
• /
• pp.15-15
• /
• 1999

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the conventional rotating barrel. vibrational barrel (vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components, The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed that the average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value, Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components, However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. $2HD{\;}+{\;}e{\;}{\rightarrow}20H{\;}+{\;}H_2$ Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure thereby resulting to bad plating condition. 1 lot of chip was divided into two equal partion. Each portion was loaded to the same barrel one after the other. Nickel plating and tin-lead plating was performed in the same station. Portion A maintained the normal barrel vibration intensity and portion B vibration intensity was increased two steps higher. All other parameters, current, solution condition were maintained constant. Generally, plating method find procedures were carried out in a best way to maintained the best plating condition. After plating, samples were taken out from each portion. molded and polished. Plating thickness was investigated for both. To check consistency of results. 2nd trial was done now using different lot of another characteristics.

• Physical Therapy Rehabilitation Science
• /
• 제5권4호
• /
• pp.210-214
• /
• 2016

Objective: The aim of this study was to measure the muscle architectural parameters of abdominal muscles in healthy individuals by rehabilitative ultrasound imaging (RUSI) and to investigate their changes after bridging exercise in various environments. Design: Cross-sectional study. Methods: The study included 40 healthy participants (19 men, 21 women). Subjects were randomly allocated to a stable surface group (SG, n=20) or an unstable surface group (UG, n=20). The participants assumed three positions in rest, bridging exercise with knee flexion $60^{\circ}$, and bridging exercise with knee flexion $90^{\circ}$ for the measurement of abdominal muscle thickness by RUSI. For the resting position, the participants held the head neutral in a hook-lying position and the dominant side was measured. For contraction, the participants performed the bridging exercise with the knee joint in $60^{\circ}$ and $90^{\circ}$ of flexion for 10 seconds each. Results: For transversus abdominis, external oblique muscle thickness, within the stable surface group and the unstable surface group, no significant contraction difference was observed in both the $60^{\circ}$ and $90^{\circ}$ bridge exercise conditions. Contraction difference of internal oblique muscle was significantly larger at $90^{\circ}$ than at $60^{\circ}$ within the SG (p<0.05). But within the UG, no significant contraction difference was shown. There was no significant contraction difference between the surface group and the unstable SG at $60^{\circ}$ condition and at $90^{\circ}$ condition in all measured muscles. Conclusions: The contraction difference is different for each muscle during bridge exercise with knee flexion $60^{\circ}$ and bridging exercise with knee flexion $90^{\circ}$. Muscle contraction difference is generally large when exercised on an unstable surface than a stable surface, but these are not statistically significant when bridging exercise is performed using dynamic air cushion for unstable surface.

• 대한토목학회논문집
• /
• 제14권5호
• /
• pp.1145-1158
• /
• 1994

물의 유동(流動)에 관한 계산상 효율성(效率性)을 갖는 자유수면(自由水面)을 고려한 3차원(次元) 유한차분(有限差分) 수직모형(數値模型)을 개발하였다. 수직모형(數値模型)은 연직방향(鉛直方向)에 대해 정규화(正規化)한 좌표(座標)(${\sigma}$-coordinate)를 사용하며, 시간(時間) 적분방법(積分方法)으로는 반음해법(半陰解法)(semi-implicit)을 사용하여 계산시간(計算時間)의 효율성(效率性)을 도모하였다. 모드분리(mode-splitting)개념을 도입하여 내부모드(internal mode)에 대해서는 양해법(陽解法)을 사용하였으며, 외부모드(external mode)는 수평방향(水平方向) 운동량방정식(運動量方程式)들과 연속방정식(連續方程式)의 차분식(差分式)으로부터 구한 타원형(楕圓型) 차분방정식(差分方程式)을 SOR방법에 의하여 해석하였다. 이와 같은 방법은 계산(計算) 시간간격(詩間間隔)이 표면(表面) 중력파(重力波)에 대한 CFL(Courant-Fredrich-Lewy)조건에 의해 제약을 받지 않아 계산시간(計算時間)의 효율성을 도모할 수 있다. 개발된 모형은 1차원(次元) 수로(水路)에서 취송유(吹送流)의 연직분포(鉛直分布)에 대한 해석해(解析解)와 비교(比較) 및 연직(鉛直) 가변격자(可變格子)의 도입에 따른 오차분석(誤差分析) 정사각형(正四角形) 호수(湖水)에서 취송유(吹送流) 계산(計算) 및 차분화(差分化) 상수(常數)들의 민감도(敏感度) 분석(分析)을 수행하였다.

• 대한기계학회논문집B
• /
• 제36권7호
• /
• pp.721-730
• /
• 2012

본 연구에서는 벽면부착에 의해 야기되는 다상유동에 대한 수치적 연구를 제시한다. 먼저 다상유동 해석을 위해 표면장력에 대한 CSF(Continuum Surface Force) 모델 및 벽면부착 경계조건 모델을 비정렬격자계에 적합하도록 수치해석방법을 정립시키고, Myong(2009)이 개발한 비정렬격자계와 VOF 방법으로 체적포착법(volume capturing method)을 사용한 수치해석방법(코드)에 삽입하였다. 또한 본 수치해석방법을 사용하여 중력을 포함하여 어떤 외력도 존재하지 않고 오직 벽면부착에 의해 야기되는 유동현상인 원통형 탱크의 바닥에 위치한 얕은 물풀(water pool)에 대해 물이 벽면을 적시는 경우와 적시지 않는 경우에 대해 수치해석 하였다. 연구결과, 본 수치해석방법은 벽면부착에 의해 야기되는 다상유동 문제에 대한 유용성이 입증되었다.

• 한국군사과학기술학회지
• /
• 제20권6호
• /
• pp.767-773
• /
• 2017

Infrared stealth is an important technology for naval ships. This technology helps improve the anti-detection performance and survivability of naval ships. In general, the infrared signature of naval ships are categorized into internal and external heat source. External signature are generated by ship surface heating by solar flux as well as the complicated heat transfer process with the surrounding weather condition. Modern naval ships are equipped with seawater injection nozzles on the outside for nuclear, biological and, chemical, and these nozzles are used to control external signature. Wide nozzle placement intervals and insufficient injection pressure, however, have reduced seawater dispersion area. To address this problem, nozzle installation standards must be established. In this study, an actual-scale experimental system was implemented to provide the evidence for nozzle installation standards in order to reduce the infrared signature of naval ships. In addition, the environmental conditions of the experiment were set up through computational fluid dynamics considering the ocean climate data and naval ship management conditions of South Korea. The dispersion distance was measured using a high-resolution thermography system. The flow rate, pipe pressure, and dispersion distance were analyzed, and the evidence for the installation of seawater injection nozzles and operation performance standards was suggested.

• 한국전문물리치료학회지
• /
• 제16권4호
• /
• pp.16-22
• /
• 2009

The purpose of this study was to investigate the trunk and lower extremity muscle activity induced by three different intensity conditions (intensity 1, 3, 5) of whole body vibration (WBV) during bridging exercise. Surface electromyography (EMG) was used to measure trunk and lower extremity muscles activity. Eleven healthy young subjects (6 males, 5 females) were recruited from university students. The collected EMG data were normalized using reference contraction (no vibration during bridging) and expressed as a percentage of reference voluntary contraction. To analyze the differences in EMG data, the repeated one-way analysis of variance was used. A Bonferroni's correction was used for multiple comparisons. The study showed that EMG activity of the rectus abdominis, external oblique, internal oblique, erector spinae and rectus femoris muscles was not significantly different among three intensity conditions of WBV during bridging exercise (p>.05). However, there were significantly increased EMG activity of the medial hamstring muscle (p=.001) and medial gastrocnemius muscle (p=.027) in the intensity 3 condition compared with the intensity 1 condition. This result can be interpreted that vibration was absorbed through the distal muscles, plantar flexor and knee flexor.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권9호
• /
• pp.3797-3822
• /
• 2020

The inspection of cracks on the surface of tunnel linings is a common method of evaluate the condition of the tunnel. In particular, determining the thickness and shape of a crack is important because it indicates the external forces applied to the tunnel and the current condition of the concrete structure. Recently, several automatic crack detection methods have been proposed to identify cracks using captured tunnel lining images. These methods apply an image-segmentation mechanism with well-annotated datasets. However, generating the ground truths requires many resources, and the small proportion of cracks in the images cause a class-imbalance problem. A weakly annotated dataset is generated to reduce resource consumption and avoid the class-imbalance problem. However, the use of the dataset results in a large number of false positives and requires post-processing for accurate crack detection. To overcome these issues, we propose a crack detection method using a ternary classifier. The proposed method significantly reduces the false positive rate, and the performance (as measured by the F1 score) is improved by 0.33 compared to previous methods. These results demonstrate the effectiveness of the proposed method.