• Tribology and Lubricants
• /
• v.11 no.5
• /
• pp.150-155
• /
• 1995

In order to analyze the thermal effects of the rotor models, the finite element technique was used in this study. The length of the hat was investigated as a design parameter. At the start of each brake application the disk surface temperature rapidly increases to a maximum value and then decays due to external cooling and thermal conduction to the hat. The calculated results indicate that the long length of the hat shows the minimum deformation in axial direction, which is related to the thermal problems, coned wear, vibration and noise.

• Food Science and Preservation
• /
• v.3 no.1
• /
• pp.77-82
• /
• 1996

Most of countries differ from their favors, in Taiwan fruit juice and sweet taste are emphasized while external appearance in Japan. During transportation, movement of the container, fluctuation of temperature, decrease of the fruit freshness and undesirable packing materials tend to decline fruit marketability. For these problems, it is believed that shortening of boarding time by utilization of plate and styro form box for packing, the author believed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.1
• /
• pp.136-144
• /
• 2004

In general a hydraulic system which uses a single rod hydraulic as an actuator is modeled as a nonlinear system and reveals uncertain Parameter characteristics such as the density variation of hydraulic oil and is subject to load variations and severe disturbances during operation. A variable design-parameter fuzzy PID controller is adopted to solve these undesirable internal and external problems and its effectiveness is verified through computer simulations for control performance and real time control possibility.

• Journal of Mechanical Science and Technology
• /
• v.20 no.4
• /
• pp.554-560
• /
• 2006

This paper describes the demonstration of successful fabrication and initial characterization of micromachined pressure sensors and micromachined jets (microjets) fabricated for use in macro flow control and other applications. In this work, the microfabrication technology was investigated to create a micromachined fluidic control system with a goal of application in practical fluids problems, such as UAV (Unmanned Aerial Vehicle)-scale aerodynamic control. Approaches of this work include: (1) the development of suitable micromachined synthetic jets (microjets) as actuators, which obviate the need to physically extend micromachined structures into an external flow; and (2) a non-silicon alternative micromachining fabrication technology based on metallic substrates and lamination (in addition to traditional MEMS technologies) which will allow the realization of larger scale, more robust structures and larger array active areas for fluidic systems. As an initial study, an array of MEMS pressure sensors and an array of MEMS modulators for orifice-based control of microjets have been fabricated, and characterized. Both pressure sensors and modulators have been built using stainless steel as a substrate and a combination of lamination and traditional micromachining processes as fabrication technologies.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.16 no.2
• /
• pp.61-68
• /
• 2020

Nuclear power plants have a lower cost of power generation, and they are more eco-friendly than other power generation plants. Also, we need to prepare nuclear plant accidents because of their severe damage. In the event of a safety accident, such as a radiation leak, by applying a wireless sensor network to a nuclear power plant, many sensor nodes can be used to monitor radiation and transmit information to an external base station to appropriately respond to the accident. However, applying a wireless sensor network to nuclear power plants requires routing protocols that consider the sensor network size and bypass obstacles such as plant buildings. In general, the hierarchical-based routing protocols are efficient in energy consumption. In this study, we look into the problems that may occur if hierarchical-based routing protocols are applied to nuclear power plants and propose improved routing protocols to solve these problems. Simulation results show that the proposed routing protocol is more effective in energy consumption than the existing LEACH protocol.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.318-321
• /
• 2005

In vibro-acoustic analysis, the commercial CAE tools, such as SYSNOISE, is usually used to take into account of the coupled effects of fluid acoustics and structural vibration. The acoustic field can be solved by either FEM or BEM, while the vibration field is usually solved by FEM. The interior or exterior acoustic problems with the coupled effects of the structural boundary could be solved by the commercial tools. The commercial tools, however, could not solve the problems in case that both the interior and exterior acoustic field is coupled with the structural boundary. In this paper, a realistic method based on FEM/BEM coupling scheme is presented to analyze the acoustic radiation from the internal source in a chamber to external acoustic field through elastic structural boundary. Several numerical examples are implemented to validate the developed program.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.1
• /
• pp.46-51
• /
• 2007

Environmental contamination creates shortages of potable water. In such situations, the leakage of water due to breakage or aging of rubber valve seats is a serious problem. Rubber is apt to break when it is placed between two materials that contact each other. One way to avoid water leakage due to rubber damage and breakdown is to replace the rubber with metal, which is currently taking place in water distribution systems. In tribology, a severe form of wear is characterized by local macroscopic material transfer or removal, or by problems with sliding protrusions when two solid surfaces experience relative sliding under load. One of the major problems when metal slides is the occurrence of galling. Experimentally, various conditions influence incipient galling, such as hardness, surface roughness, temperature, load, velocity, and the external environment. This study sought to verify the galling tendencies of metal according to its hardness, surface roughness, load, and sliding velocity, and determine the quantitative effect of each factor on the galling tendencies.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.2
• /
• pp.127-139
• /
• 2004

Web-based services have fundamentally confidential problems due to characteristics of internet environment such as anonymity. These problems are serious obstacles to grow the web-based services. The security and confidence of web-based services rely on both service provider and users' opinion. But the former has difficulty in trusting the service provider and the latter takes too long time to propagete all users after converging their opinion. Therefore it is necessary to establish the objective and confidential evaluation and certification program for web-based service. In this paper, the internal and external web-based services evaluation and certification programs are compared and analyzed. The critical factors and evaluation methodology for secure and confidential web-based service are identified. Finally, this paper provides the improvement and strategy for web-based services evaluation and certification program.

• Journal of the Korean Vacuum Society
• /
• v.5 no.3
• /
• pp.188-193
• /
• 1996

A new display -type spherical mirror analyzer has been characterized in terms of the performance and the auger spectra taken by using it. The final goal with the analyzer is to devleop SET(Surface Electron Spectroscopic Tomography) which is capable to provide a 3-dimensional layer-by-layer information nondestructively. This kind of analyzer was originally designed by H.Daimon. The main feature is to display 2-dimensional electronic structures directly onto a screen. In our case, an external micro-electron beam was employed as an excitation source. However, this invokes various problems because of the interference between the electron beam and the analyzer. The problems have been solved through the optimization of various parameters of the analyzer.

• Journal of the Korean Society for information Management
• /
• v.12 no.2
• /
• pp.151-169
• /
• 1995

The purpose of this research is to investigate the of multimedia university library system theoretical models and to design partial functions of this model using multimedia toolbook 3.0. The theoretical model is constructed based on several operating systems such as JANUS Virtual Library and The Book House. Knowledge base of the designed system is constructed by interviewing reference librarians. The designed system consists of six modules : Reference Expert system. Journal Browsing, Multimedia Database, OPAC, External Database and User' s Guide. Finally, four problems are discussed as several major problems in building up multimedia university library network