• International Journal of Air-Conditioning and Refrigeration
• /
• v.14 no.1
• /
• pp.1-6
• /
• 2006

For the purpose of processing weather data for air conditioning equipment de sign in Busan area Korea, this study collected weather observations made by Busan weather Administration from 1970 to 2003, and then established external conditions for heating and air-conditioning design. For changes of temperature in external conditions for design, the highest temperature had little changed, whereas the lowest had been on the rise as the years went by through the 1970s, 1980s, 1990s, and 2000s, but insolation has a little lessened. Absolute humidity does not show a significant change but an incessant rise.

• Steel and Composite Structures
• /
• v.8 no.3
• /
• pp.201-216
• /
• 2008

The Eurocode system provides limited information regarding the structural fire design of external steel structures. Eurocode 1 provides thermal action for external member but only in steady-state conditions. On the other hand, Eurocode 3 provides a methodology to determine heat transfer to external steelwork, but there is no distinction in cross section shapes and, in addition, the calculated temperature distribution is assumed to be uniform in the cross section. This paper presents the results of a research carried out to develop a new transient heat transfer model for external steel elements to improve the current approach of the Eurocodes. This research was carried out as part of the project EXFIRE "Development of design rules for the fire behaviour of external steel structures", funded by the European Research Programme of the Research Fund for Coal and Steel (RFCS).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.5
• /
• pp.297-308
• /
• 2022

Most air-breathing aircraft operated in the hypersonic region are equipped with a scramjet engine. In a scramjet engine, a shock wave generated at an inlet acts as a compressor for a general gas turbine engine instead, so total pressure loss caused by the shock wave is considered very important. In this study, to minimize total pressure loss, a method of designing an external compression inlet using isentropic compression surface was proposed, and an external compression inlet with 3-deflection angles and Busemann inlet were designed under the same conditions. After that, through computational analysis, the performance characteristics at off-design conditions were compared. Each inlet shape was truncated according to the length of the 3-ramp external compression inlet, and the boundary layer correction was performed. The isentropic external compression inlet showed superior performance at the design point, but under the off-design conditions, its performance was degraded compared to the 3-ramp external compression inlet.

• Journal of the Korean Society of Costume
• /
• v.63 no.3
• /
• pp.17-32
• /
• 2013

This study examined the visual elements of the Trompe l'oeil design and the combination conditions of each element in order to deduce the form generation diagrams of Trompe l'oeil fashion design. The following is what the study found: First, Trompe l'oeil fashion design can be divided into two based on its subject: 'the combination of internal elements of dress' and 'the combination of external elements of dress'. Looking at the visual components of each type, depending on the subject, 'the combination of internal elements of dress' design was achieved by combining internal dress elements: including textile, detail, item, accessory, layering, etc.. In case of 'the combination of external elements of dress' design, the object of Trompe l'oeil was expanded in scope to environment, which includes the actions of a wearer. Second, as for Trompe l'oeil fashion design through the combination of external dress elements, the condition to combined visual components of the work in the process of creation was related to 'the popularity of object', 'the similarity of shapes and sizes', and 'the probability of location'. Third, deriving a form generation diagrams of Trompe l'oeil fashion design was very effective in delineating specific relationships and conditions, directions among elements combined in fashion design.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.207-208
• /
• 2008

This paper presents a robust state observer design for a class of Lipschitz nonlinear systems with time delay and external disturbance. A sufficient conditions on the existence of the proposed observer are characterized by linear matrix inequalities. It is also shown that the proposed observer design can reduce the effect on the estimation error of external disturbance up to the prescribed level in spite of the existence of time delay. Finally, a numerical example is provided to verify the proposed design method.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.04a
• /
• pp.67-70
• /
• 2000

The tool life is not long enough under sever forming condition in warm forging. The tool life is affected by wear heat fatigue plastic deformation and so on. Especially wear is one of the most serious factors for tool life. To increase tool life we should consider various factors like processing design die design die materials lubrication and cooling system This study design to obtain the steady state temperature of die by FEM analysis under several conditions of cooling. There are four cooling conditions in this study no cooling internal cooling external cooling and both internal and external cooling. With above obtained temperatures tool life is predicted using Archard's model that is considered softening of die. The effect of internal cooling system is better than that of externally cooled die. To predict the die life the steady state temperature is calculated by using mean temperature of die. Considering only wear the die life much longer as the cooling effect is bigger. The more accurate die life will be predicted if we consider heat crack as well as wear.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.8
• /
• pp.837-841
• /
• 2008

This paper presents a robust reduced order state observer for a class of Lipschitz nonlinear systems with external disturbance. Sufficient conditions on the existence of the proposed observer are characterized by linear matrix inequalities. It is also shown that the proposed observer design can reduce the effect on the estimation error of external disturbance up to the prescribed level. Finally, a numerical example is provided to verify the proposed design method.

• Fashion & Textile Research Journal
• /
• v.20 no.2
• /
• pp.167-176
• /
• 2018

In this study, an eye-tracking program that can confirm a design cognition process was developed for the purpose of presenting strategic methods to create fashion images, and the program was used to identify what effects fashion models' external characteristics have on the cognition of design. The data for analysis were collected through an eyemovement tracking experiment and a survey, with the focus on the research problem that differences in models' external uniformity will lead to differences in the eye movement for perceiving models and design as well as the image sensibility. The results of the analysis are as follows. First, it was confirmed that the uniformity of model types and the simplicity/complexity of design led to differences in the eye movement directed at design and models and the gaze ratio. Consequently, it is deemed that models should be selected in consideration of the characteristics of design and the intention of planning when creating fashion images. Second, it was found that in terms of the cognition of design, external conditions of models affect design sensibility. A change in models led to a subtle difference in sensibility cognition even when the design condition did not change. Thus, not only the design but also model attributes are factors that should be considered important in fashion planning.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.480-485
• /
• 2009

Offshore wind energy is gaining more attention. Ensuring proper design of offshore wind turbines and wind farms require knowledge of the external conditions in which the turbines and associated facilities are to operate. In this work, a three-bladed 5MW upwind wind turbine, which is supported by the monopile foundation, is studied by use of fully coupled aero-hydro-servo-elastic commercial simulation tool, 'GH-Bladed'$^{(R)}$. Specification of the structures are chosen from the OC3 (Offshore Code Comparison Collaboration) under "IEA Wind Annex XXIII-subtask2". The primary external conditions due to wind and waves are simulated. Design Load case 5.2 is investigated in this work. The steady state power curve and power production loads are evaluated. Comparison between different codes is made.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.11
• /
• pp.570-579
• /
• 2017

In this study, we examined the multi-stage piston-type air compressors typically used in a railroad vehicle, and the heat transfer efficiency was analyzed according to the design conditions of the heat exchanger (a compressor component module for cooling the compressed high temperature air). For the fin-tube heat exchanger used in the most air compressors, numerical analysis was performed to analyze heat transfer by defining the various rectangle tube sizes and the number of fin-per-unit area as design variables under the same flow rate of compressed air. Also, this analysis compared the temperature of the compressed air. Regarding environmental conditions for analysis, the flow rate of the external cooling air was measured and the mean value of the values was applied. And a "turbulence model" was considered in both the external flow of the cooling air and the internal flow inside the tube. From the results of analysis, it was found that the change of the aspect ratio value of the tube greatly influences the heat transfer efficiency of the compressed air, and influences if the fin density is relatively small. As a result, the optimum design specifications of the heat exchanger for air compressors were confirmed based on the analysis of the heat transfer efficiency, according to the design conditions of fin and tube by the operating temperature range of the compressed air.