• 제목/요약/키워드: External Sound Frequency

검색결과 37건 처리시간 0.02초

완전 이식형 보청기를 위한 진동 기반의 가속도 센서 제안 (Proposition of a Vibration Based Acceleration Sensor for the Fully Implantable Hearing Aid)

  • 신동호;문하준;성기웅;조진호
    • 재활복지공학회논문지
    • /
    • 제11권2호
    • /
    • pp.133-141
    • /
    • 2017
  • 하이브리드 음향센서 (hybrid acoustic sensor)는 음압 기반의 음향센서 (ECM)와 진동 기반의 가속도 센서(acceleration sensor)가 접목된 구조이다. 이는 음향센서의 저주파 대역 감도와 가속도 센서의 고주파 대역 감도를 결합하여 저주파에서 고주파 대역까지 광범위하게 음향을 포집할 수 있다. 본 논문에서는 하이브리드 음향센서에 사용되는 가속도 센서를 제안하였다. 가속도 센서는 음향신호에 의해 발생되는 고막의 진동을 포집한다. 제안된 가속도 센서의 사이즈는 고막의 해부학적 구조와 음향센서인 ECM의 규격을 고려하여 직경 3.2 mm로 결정하였다. 그리고 하이브리드 음향센서가 고감도 광대역 특성을 가지도록 하기 위해서는 가속도 센서의 공진 주파수는 3.5 kHz 부근에서 생성되는 것을 목표로 하였다. 가속도 센서를 구성하는 진동막은 수학적 모델과 유한요소 해석을 통하여 기하학적 구조를 도출하였다. 이를 바탕으로 화학적 식각공정을 이용하여 진동막을 제작하였다. 그리고 제작된 진동막의 주파수 특성을 확인하기 위하여 외력에 의한 진동 측정 실험을 수행하였고, 실험 결과 진동막의 기계적 공진은 3.4 kHz에서 발생되었다. 그러므로 제안한 가속도 센서는 하이브리드 음향센서에 유용하게 활용될 수 있을 것으로 판단된다.

인공 신경망을 이용한 보청기용 실시간 환경분류 알고리즘 (Real Time Environmental Classification Algorithm Using Neural Network for Hearing Aids)

  • 서상완;육순현;남경원;한종희;권세윤;홍성화;김동욱;이상민;장동표;김인영
    • 대한의용생체공학회:의공학회지
    • /
    • 제34권1호
    • /
    • pp.8-13
    • /
    • 2013
  • Persons with sensorineural hearing impairment have troubles in hearing at noisy environments because of their deteriorated hearing levels and low-spectral resolution of the auditory system and therefore, they use hearing aids to compensate weakened hearing abilities. Various algorithms for hearing loss compensation and environmental noise reduction have been implemented in the hearing aid; however, the performance of these algorithms vary in accordance with external sound situations and therefore, it is important to tune the operation of the hearing aid appropriately in accordance with a wide variety of sound situations. In this study, a sound classification algorithm that can be applied to the hearing aid was suggested. The proposed algorithm can classify the different types of speech situations into four categories: 1) speech-only, 2) noise-only, 3) speech-in-noise, and 4) music-only. The proposed classification algorithm consists of two sub-parts: a feature extractor and a speech situation classifier. The former extracts seven characteristic features - short time energy and zero crossing rate in the time domain; spectral centroid, spectral flux and spectral roll-off in the frequency domain; mel frequency cepstral coefficients and power values of mel bands - from the recent input signals of two microphones, and the latter classifies the current speech situation. The experimental results showed that the proposed algorithm could classify the kinds of speech situations with an accuracy of over 94.4%. Based on these results, we believe that the proposed algorithm can be applied to the hearing aid to improve speech intelligibility in noisy environments.

생체 발성모형에서 발성시 공기양의 변화가 음성 지표에 미치는 영향 (Effect of Air Flow Change on Voice Parameters : In Vivo Canine Laryngeal Model)

  • 최홍식
    • 대한후두음성언어의학회지
    • /
    • 제5권1호
    • /
    • pp.5-10
    • /
    • 1994
  • 1) 공기양이 증가함에 따라 성문하압(Psub)은 증가하였으나, 성문저항(R)은 감소하였다. 2) 공기양이 증가함에 따라 소리 크기(Intensity)는 증가하였다. 3) 공기양이 증가함에 따라 성문개방율(OQ)은 증가하였다. 4) 가성영역(falsetto)에서 공기양의 증가는 기본 주파수(Fo)를 증가시켰으나, 지성영역 (modal)에서는 일률적인 변화를 보이지 않았다. 5) 갑상피열분지(TA branch)를 함께 자극했을 때(modal)는 그렇지 않을 때(falsetto)에 비하여, 성문하압(Psub), 성문저항(R), 소리 크기(intensity), 기본주파수(Fo)는 모두 증가하였으나, 성문개방율(OQ)은 감소하였다.

  • PDF

막장력 측정을 통한 막구조물의 장력 유지관리 시스템 검토 (Review of Membrane Tension Maintenance System for Membrane Structures through Membrane Tension Measurement)

  • 진상욱;손수덕;이승재
    • 한국공간구조학회논문집
    • /
    • 제16권2호
    • /
    • pp.39-45
    • /
    • 2016
  • Membrane structure is a system that is stabilized by maintaining a tensile state of the membrane material that originally cannot resist the bending or pressure. Also, it is a system that allows the whole membrane structure to bear external loads caused by wind or precipitation such as snow, rain and etc. Tension relaxation phenomenon can transpire to the tension that is introduced to the fabric over time, due to the innate characteristics of the membrane material. Thus, it is important to accurately understand the size of the membrane tension after the completion of the structures, for maintenance and management purposes. The authors have proposed the principle of theoretically and indirectly measuring the tension by vibrating the membrane surface with sound waves exposures against the surface, which is compartmentalized by a rectangular boundary, and by measuring the natural frequency of the membrane surface that selectively resonates. The authors of this paper measured the tension of preexisting membrane structure for its maintenance by using the developed portable measurement equipment. Through analyzing the measurement data, the authors review the points that should be improved and the technical method for the new maintenance system of membrane tension.

평형곤을 모사한 생체모방형 구동부 일체형 각속도 센서 (Biomimetic Gyroscope Integrated with Actuation Parts of a Robot Inspired by Insect Halteres)

  • 정민기;김지수;장서형;이태재;심형보;고형호;조규진;조동일
    • 제어로봇시스템학회논문지
    • /
    • 제22권9호
    • /
    • pp.705-709
    • /
    • 2016
  • Micro-electro-mechanical systems (MEMS) gyroscopes are widely used in various robot applications. However, these conventional gyroscopes need to vibrate the proof mass using a built-in actuator at a fixed resonance frequency to sense the Coriolis force. When a robot is not moving, the meaningless vibration of the gyroscope wastes power. In addition, this continuous vibration makes the sensor vulnerable to external sound waves with a frequency close to the proof-mass resonance frequency. In this paper, a feasibility study of a new type of gyroscope inspired by insect halteres is presented. In dipterous insects, halteres are a biological gyroscope that measures the Coriolis force. Wing muscles and halteres are mechanically linked, and the halteres oscillate simultaneously with wing beats. The vibrating haltere experiences the Coriolis force if the insect is going through a rotational motion. Inspired by this haltere structure, a gyroscope using a thin mast integrated with a robot actuation mechanism is proposed. The mast vibrates only when the robot is moving without requiring a separate actuator. The Coriolis force of the mast can be measured with an accelerometer installed at the tip of the mast. However, the signal from the accelerometer has multiple frequency components and also can be highly corrupted with noise, such that raw data are not meaningful. This paper also presents a suitable signal processing technique using the amplitude modulation method. The feasibility of the proposed haltere-inspired gyroscope is also experimentally evaluated.

음향결정 구조의 레벨셋 기반 위상 및 형상 최적설계 (Level Set based Topological Shape Optimization of Phononic Crystals)

  • 김민근;하시모토 히로시;아베 카주히사;조선호
    • 한국전산구조공학회논문집
    • /
    • 제25권6호
    • /
    • pp.549-558
    • /
    • 2012
  • 본 논문에서는 레벨셋 방법을 이용하여, 소음을 차단하기 위한 음향 구조물의 형상 최적설계를 수행하였다. 형상 최적설계의 목적은 특정한 각도와 각속도로 입사되는 입사파에 대해서 음향 투과율(acoustic transmittance)이 최소가 되도록 음향 결정의 형상(inclusion shape)을 결정하는 것이다. 음향 결정 구조에서는 음향이 흩어져 있는 결정 구조에 의해서 굴절되기 때문에 결정 모양을 조정함으로써, 음향 거동을 제어할 수 있다. 본 연구에서는 음향 구조물로 결정이 수평방향으로는 주기적으로 무한히 분포하고 수직방향으로는 유한한 층간 구조를 가지고 있는 소음 방어벽(Noise barrier)을 고려한다. 주기적 구조물을 고려하기 때문에 결정의 좌와 우에 Bloch 이론을 적용해 주기적 경계조건을 부과하였고, 소음 방어벽 위와 아래에는 임피던스 행렬(impedance matrix)를 이용하여, 무한 균질 영역과 소음 방어벽 사이의 음파 투과를 모사하였다. 결정의 위상과 형상변화를 묘사하기 위해서 레벨셋 방법(level set method)을 사용하였다. 레벨셋 방법에서는 초기 영역을 고정시킨 상태에서, 레벨셋으로 표현되는 임시적 경계(implicit moving boundary)를 변화시킴으로써 복잡한 형상을 다룰 수 있다. 몇몇 수치적 예제를 통해, 제시된 방법의 적용성을 검증하였다.

THE CURRENT STATUS OF BIOMEDICAL ENGINEERING IN THE USA

  • Webster, John G.
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1992년도 춘계학술대회
    • /
    • pp.27-47
    • /
    • 1992
  • Engineers have developed new instruments that aid in diagnosis and therapy Ultrasonic imaging has provided a nondamaging method of imaging internal organs. A complex transducer emits ultrasonic waves at many angles and reconstructs a map of internal anatomy and also velocities of blood in vessels. Fast computed tomography permits reconstruction of the 3-dimensional anatomy and perfusion of the heart at 20-Hz rates. Positron emission tomography uses certain isotopes that produce positrons that react with electrons to simultaneously emit two gamma rays in opposite directions. It locates the region of origin by using a ring of discrete scintillation detectors, each in electronic coincidence with an opposing detector. In magnetic resonance imaging, the patient is placed in a very strong magnetic field. The precessing of the hydrogen atoms is perturbed by an interrogating field to yield two-dimensional images of soft tissue having exceptional clarity. As an alternative to radiology image processing, film archiving, and retrieval, picture archiving and communication systems (PACS) are being implemented. Images from computed radiography, magnetic resonance imaging (MRI), nuclear medicine, and ultrasound are digitized, transmitted, and stored in computers for retrieval at distributed work stations. In electrical impedance tomography, electrodes are placed around the thorax. 50-kHz current is injected between two electrodes and voltages are measured on all other electrodes. A computer processes the data to yield an image of the resistivity of a 2-dimensional slice of the thorax. During fetal monitoring, a corkscrew electrode is screwed into the fetal scalp to measure the fetal electrocardiogram. Correlations with uterine contractions yield information on the status of the fetus during delivery To measure cardiac output by thermodilution, cold saline is injected into the right atrium. A thermistor in the right pulmonary artery yields temperature measurements, from which we can calculate cardiac output. In impedance cardiography, we measure the changes in electrical impedance as the heart ejects blood into the arteries. Motion artifacts are large, so signal averaging is useful during monitoring. An intraarterial blood gas monitoring system permits monitoring in real time. Light is sent down optical fibers inserted into the radial artery, where it is absorbed by dyes, which reemit the light at a different wavelength. The emitted light travels up optical fibers where an external instrument determines O2, CO2, and pH. Therapeutic devices include the electrosurgical unit. A high-frequency electric arc is drawn between the knife and the tissue. The arc cuts and the heat coagulates, thus preventing blood loss. Hyperthermia has demonstrated antitumor effects in patients in whom all conventional modes of therapy have failed. Methods of raising tumor temperature include focused ultrasound, radio-frequency power through needles, or microwaves. When the heart stops pumping, we use the defibrillator to restore normal pumping. A brief, high-current pulse through the heart synchronizes all cardiac fibers to restore normal rhythm. When the cardiac rhythm is too slow, we implant the cardiac pacemaker. An electrode within the heart stimulates the cardiac muscle to contract at the normal rate. When the cardiac valves are narrowed or leak, we implant an artificial valve. Silicone rubber and Teflon are used for biocompatibility. Artificial hearts powered by pneumatic hoses have been implanted in humans. However, the quality of life gradually degrades, and death ensues. When kidney stones develop, lithotripsy is used. A spark creates a pressure wave, which is focused on the stone and fragments it. The pieces pass out normally. When kidneys fail, the blood is cleansed during hemodialysis. Urea passes through a porous membrane to a dialysate bath to lower its concentration in the blood. The blind are able to read by scanning the Optacon with their fingertips. A camera scans letters and converts them to an array of vibrating pins. The deaf are able to hear using a cochlear implant. A microphone detects sound and divides it into frequency bands. 22 electrodes within the cochlea stimulate the acoustic the acoustic nerve to provide sound patterns. For those who have lost muscle function in the limbs, researchers are implanting electrodes to stimulate the muscle. Sensors in the legs and arms feed back signals to a computer that coordinates the stimulators to provide limb motion. For those with high spinal cord injury, a puff and sip switch can control a computer and permit the disabled person operate the computer and communicate with the outside world.

  • PDF