• International journal of advanced smart convergence
• /
• 제10권4호
• /
• pp.241-255
• /
• 2021

The human auricle is the first part to receive sound from the outside. In this part, the frequency range of human recognizable form is divided and organized. In this study, we propose modeling by applying a single sound source to the surface of the human auricle. This means that when the sound pressure of a low frequency (low frequency) sound enters the pinna, the impedance felt at the tip of a part of the non-linear surface of the pinna is mainly due to the tensile force at the end of the part of the non-linear surface of the pinna. By expressing the situation of moving at a very small speed, the characteristic impedance of the pinna was confirmed to be negative infinity, and it was also confirmed that the speed at the tip of a part of the non-linear surface of the pinna was 0 in the anti-resonance state. It was found that the wave propagation phenomenon that determines the characteristics of the filter is determined by how large the wavelength, kL, is compared to the length of the tip of a part of the non-straight surface of the pinna. Humans first receive sounds from outside through their ears. The auricle is non-linear and has a curved shape, and it is known that it analyzes frequencies while receiving external sounds. The human ear has an audible frequency range of 20Hz - 20,000Hz. Through the study, we applied the characteristics of the notch filter to hypothesize that the human audible frequency range is separated from the auricle, and applied filter theory to analyze it, and as a result, meaningful results were obtained. The curved part and the inner part of the auricle function as a trumpet, collecting sounds, and at the same time amplifying the weak sound of a specific band. The point was found and the shape of the envelope detected in the auricle was found. Selectivity for selecting sounds coming from the outside is the formula of the pinna that implements the function of Q. The function of distinguishing human-recognizable sound from the pinna from low to high through frequency analysis is performed in the pinna, and the 2-3kHz area, where human hearing threshold is the most sensitive, is also the acoustic impedance of the most recessed area of the pinna. It can be seen that starting from.

• 한국음향학회지
• /
• 제34권4호
• /
• pp.288-294
• /
• 2015

광섬유 사냑 간섭계는 음향 및 진동과 같은 물리적 변화량을 탐지하는 센서로 잘 개발되어 있다. 본 논문에서는 변압기유가 채워진 원통형 캐비티에 음압이 발생되었을 때 한 개의 루프내에 설치된 광섬유 배열 센서를 이용하여 음향을 탐지하였다. 서로 다른 외부 음향 주파수 $f_1$과 $f_2$를 피에조 재료를 이용하여 발생시키고 주파수는 5 kHz에서 90 kHz까지로 선정하였다. 실험 결과 광섬유 센서는 하모닉 성분인 $f_1$, $f_2$, $2f_1$, $2f_2$, ${\mid}f_1-f_2{\mid}$, ${\mid}f_1+f_2{\mid}$의 주파수를 탐지하였다. 제안된 광섬유 센서 배열은 변압기 내의 부분 방전으로 인한 음압과 진동과 같은 물리량을 모니터링 하는데 적용할 수 있을 것으로 판단된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.785-790
• /
• 2000

The resonant frequency of a gas-filled cylindrical Helmholtz resonator in a liquid is obtained analytically. The equation of motion of the resonator is derived by using the condition of equilibrium of forces acting on the mass in the neck of the resonator. The reaction force on the upper side of the cylinder due to the acceleration of external fluid and sound radiation is obtained by using the analytical results for the baffled circular-piston problem. From the frequency response function of the resonator, a formula to predict the resonant frequency of the resonator is derived. It is shown that the resonant frequency of the Helmholtz resonator significantly decreases due to the cushioning effect of gas inside the cavity. Therefore, when a pressure transducer is to be installed in a pin-hole type mounting method, much care should be paid to remove the gas from the cavity.

• 만화애니메이션 연구
• /
• 통권35호
• /
• pp.329-346
• /
• 2014

미술은 한 사회의 정치, 경제, 사회, 문화가 만들어낸 시대적 산물이다. 최근의 디지털 매체의 발전은 예술에서 표현을 확장하는데 기여하였다. 디지털 매체는 이미지뿐만 아니라 소리나 물리적 지각 반응을 예술 창작의 한 요소로써 활용하는 것을 가능하게 한다. 또한 디지털 매체는 이미지, 소리, 빛, 그리고 다양한 조형 요소들 간의 재 융합이나 관객의 물리적 반응의 결합을 통해서 작품과 관객과 상호소통적인 공감각적이고 시지각적인 환경을 창출하도록 돕는다. 본 연구에서는 최근에 소리에 반응하는 다양한 미디어아트 작품들이 제작되고 있는데, 주로 관객이나 외부의 자극으로부터 발생되는 소리의 물리적 데이터를 시각화하는 작업에 초점을 두고 시지각적 관점에서 소리의 반응에 따른 데이터의 시각화와 작품의 이미지와 관객의 반응 관계 등을 분석하였다. 외부의 소리로부터 생성되는 물리적 데이터는 여러 가지 관점에서 분석될 수 있다. 예를 들면, 음성이나 외부 소리의 고저(pitch), 음량, 또는 주파수 분석을 통해서 데이터 분류가 가능하다. 본 연구자는 관객의 음성이나 외부의 물리적 자극을 통해서 발생되는 소리의 주파수를 분석하여 이에 상응하여 발광하는 LED기반 시각화 연구를 통해서 최근 새로운 미디어아트의 가능성을 모색하고, 실시간으로 생성될 수 있는 물리적 데이터들을 빛(LED)의 환영적 특성으로 변환함으로써 우연하게 관객에 반응하여 생성되는 다양한 시각이미지의 연출 가능성을 탐구하였다. 결과적으로 연구자는 사운드에 반응하는 시지각적인 인터랙티브 작품을 구현해보기 위하여 피에트 몬드리안(Piet Mondrian, 1872~1944)의 브로드웨이 부기우기(Broadway Boogie Woogie, 1942~3)작품을 모티브로 삼았다. 몬드리앙은 회화의 본질적인 표현 요소들을 단순화하는 작업으로 불필요하다고 생각된 요소들을 하나씩 제거하여 색, 수직선, 수평선으로 대상을 추상화시킴으로써 그 대상의 본질에 다가가고자 하였다. 연구자는 몬드리앙의 이러한 단순화된 구성을 외부의 소리 자극을 단순화하여 빛(LED)의 요소로 재현하는 시각적 표현의 메타포로 사용하였고, 몬드리앙의 정적 구성에서 빛과 소리의 공감각적인 표현을 극대화하는 동적 구성으로의 관객의 참여를 유도하는 환경을 구현해 보았다.

• 한국공간구조학회논문집
• /
• 제8권2호
• /
• pp.63-72
• /
• 2008

휨이나 압축에 저항할 수 없는 막재료에 적절한 장력을 도입함으로써 안정화 되는 막구조물은, 유지 관리면에 있어서 막면에 도입되어 있는 장력을 설계대로 유지하는 것이 매우 중요하지만, 준공후 막면에 도입되어 있는 장력을 정확하게 파악하기가 어렵다. 저자들은, 직방형의 경계를 가지는 막을 가청역의 음파를 이용해 진동시키고, 진동하는 막의 공진진동수를 측정함으로써 간접적으로 막장력을 측정하는 방법을 제안하고, 막을 진동시키는 음파로서 정현파와 화이트 노이즈를 이용해 검증실험을 해 왔다. 본 논문은 주요 막재료를 이용해 행한 막장력 측정 이론의 검증을 위한 실험 결과와, 실재하는 막구조물의 장력측정을 통해, 본 측정장치의 정확성과 폭 넓은 적용성 및 측정에 있어서의 안정성을 검증한다.

• 한국멀티미디어학회논문지
• /
• 제18권5호
• /
• pp.652-662
• /
• 2015

It is necessary to develop small, implantable bio-telemetry systems which can measure and transmit patients' bio-signals from internal body to external receiver. When measuring bio-signals, like electrical bio-signals, acoustic bio-signal measurement has also a big clinical usefulness. But, sound signal has larger frequency bandwidth than any other bio-signals. When considering these issues, a wireless telemetry system which has rapid data transmission rate proportional to wide frequency bandwidth is necessary to be developed. The bluetooth module is used to overcome the data rate limitation caused by the large frequency bandwidth. In this paper, a novel multimedia bluetooth biotelemetry system was developed which consists of transmitter module located in the body and receiver device located outside of the body. The transmitter consists of microphone, bluetooth, and wireless charging device. And the receiver consists of bluetooth and codec system. The sound inside the skin is captured by microphone and sent to receiver by bluetooth while charging. The wireless charging system constantly supplies the electric power to the system. To verify the performance of the developed system, an in vitro experiment has been performed. The results show that the proposed biotelemetry system has ability to acquire the sound signals under the skin.

• 한국도로학회논문집
• /
• 제15권6호
• /
• pp.41-47
• /
• 2013

PURPOSES : The purpose of this study is about noise which is generated from roads and is consist of irregular frequency variation from low frequency to various band. The existing methods of noise reduction are sound barrier that uses insulation material and absorbing material or have applied passive technology of noise reduction by devices. The total frequency band is needed to apply active noise control. METHODS : In this study applies to the field of road traffic environment, signal processing controller and various analog signal input/output, the amplifier module is based on parallel-core embedded processor designed. DSP performs the control algorithm of the road traffic noise. Noise sources in the open space performance of evaluation were applied. In this study, controller of active signal processor was designed based on the module of audio input/output and main controller of embedded process. The controller of active signal processor operates noise reduction algorithm and performance tests of noise reduction in inside and outside environment were executed. RESULTS : The signal processing controller with OMAP-L137 parallel-core processors as the center, DSP processors in the active control operations dealt with quickly. To maximize the operation speed of an object and ARM processor is external function keys and display for functions and evaluating the performance management system was designed for the purpose of the interface. Therefore the reduction of road traffic noise has established an electronic controller-based noise reduction. CONCLUSIONS : It is shown that noise reduction is effective in the case of pour tonal sound and complex tonal sound below 500Hz by appling to Fx-LMS.

• Transactions on Electrical and Electronic Materials
• /
• 제9권3호
• /
• pp.123-127
• /
• 2008

The paper is to solve the problem of existing audio signal transfer system which has a difficulties of system organization and the increase of additional install cost and unfriendly interior. To solve the existing system, we drew the new audio signal transfer system based on PLC and evaluated it. A transmitter and a receiver were designed using the PLC chip INT5500CS. An audio signal transfer system was configured with a CD player to which audio signals are sent from the transmitter and a speaker connected to the receiver. For performance evaluation of this system, a USBPre external sound card and Smaart Live 5 which is a PC-based sound measuring program were added. As a result of our experiment, the measured signal level is $2{\sim}3$ dB lower than reference signal, latency is 16.69 ms, and the specific character of coherency is bad in high frequency band. Otherwise, this system transmits and receives signals over 90 % in good condition as a result of measuring pink noise, frequency (1 kHz), and phase, magnitude. In view of the result so far achieved, the system designed this study has excellent performance, it resolves defect of existing audio signal transfer system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.342-345
• /
• 2005

To detect external acoustic signal, fiber optic sensor array using Fabry-Perot interferometer which had benefit of minimize and light-weight was used. The sensor head has 1cm in length, total length of fiber is 9.5cm, and the sensor supported at both ends, simply. External sound applied in lateral direction and detected two signals were compared each other. It was confirmed that the Fabry-Perot interferometric sensor array detected acoustic signal, effectively.

• International journal of advanced smart convergence
• /
• 제8권4호
• /
• pp.214-220
• /
• 2019

Hearing impaired people are apt to be in danger because they can't detect danger with sound. Hearing impaired people have less risk-detection ability than non-disabled people because of lack of hearing. There are many devices to help the hearing impaired, such as hearing aids. A hearing aids can be helpful, but it may not be available depending on the degree or type of hearing loss for example, to the hearing-impaired people with little remaining hearing of high frequencies, ordinary hearing aids are not very useful for understanding the high frequency consonants and it requires a high cost, from thousands to tens of thousands of dollars. Also, it is difficult for the underprivileged, such as the low-income bracket and the elderly, to use them because they are difficult to manage. Therefore, this paper describes the development of low-cost wearable device to assistant a hearing-impaired people using Arduino. Also, it accepts values from switches or sensors and can control external electronic devices such as LEDs and motors to create objects that can interact with the environment. In this is paper, through sound sensors, the ambient sound was taken as an analogue value and transmitted to the aduino board, and the vibration motor was operated when the noise was generated, so that the user could be aware of the occurrence of danger.