• 제목/요약/키워드: External Reinforcement

검색결과 260건 처리시간 0.024초

강화학습 기반 주식 투자 웹 서비스 (An Implementation of Stock Investment Service based on Reinforcement Learning)

  • 박정연;홍승식;박민규;이현
    • 문화기술의 융합
    • /
    • 제7권4호
    • /
    • pp.807-814
    • /
    • 2021
  • 코로나-19로 인해 경제 활동이 낮아지고 주식 시장이 침체하면서 주식 투자를 통해 또 다른 소득을 마련하기 위해 많은 사람이 주식 시장에 뛰어들고 있다. 사람들의 관심이 높아지면서 더 많은 수익을 얻기 위한 주가 분석 연구가 많이 진행되고 있다. 주가는 종목별 변동의 흐름이 다르므로 각 주가 종목별로 독립적이며 일관적으로 분석할 필요가 있다. 이러한 문제를 해결하고자 본 논문에서는 강화학습 기법 중 하나인 Asynchronous Advantage Actor-Critic(A3C)를 이용하여 주가를 분석할 수 있는 모델 및 서비스를 설계 및 구현하였다. 주식 시장 데이터로 종목별 주가 및 국채, 코스피와 같은 외부 요인들을 반영하였다. 또한 웹페이지 제작을 통해 시각화한 정보를 제공하여 투자자들이 투자 기업에 대한 재무제표를 비롯하여 국내외 경제 및 정치의 흐름을 모두 분석하지 않고도 안전한 투자를 할 수 있도록 서비스를 제공한다.

와이어로프로 횡보강된 고중량콘크리트 전단벽의 연성평가 (Ductility Evaluation of Heavyweight Concrete Shear Walls with Wire Ropes as a Lateral Reinforcement)

  • 문주현;양근혁
    • 콘크리트학회논문집
    • /
    • 제27권3호
    • /
    • pp.207-214
    • /
    • 2015
  • 이 연구에서는 중량콘크리트 전단벽의 경계요소내에서 횡보강근으로서 와이어로프의 적용가능성을 평가하였다. 와이어로프의 횡보강근의 배근간격은 60 mm에서 120 mm로 변화되었는데, 이때의 횡보강근체적지수는 0.126~0.234이다. 와이어로프는 주철근의 외부와 경계요소내 내부의 크로스타이로 적용되었다. 와이어로프로 횡보강된 5개의 중량콘크리트 전단벽은 축력하중하에서 반복횡하중의 실험이 수행되었다. 실험결과, 횡보강근체적지수가 증가함에 따라 전단벽의 연성은 현저하게 증가한 반면, 휨 내력의 변화는 미미하였다. 전단벽의 휨 내력의 실험결과는 ACI 318-11 기준의 예측값 보다 다소 높았다. 동일한 횡보강근체적지수에서 와이어로프로 횡보강된 전단벽의 변위연성비는 일반철근으로 보강된 전단벽보다 높았다. 특히, 이 실험결과로부터 고연성설계를 위한 곡률연성비 16 이상을 확보하기 위해서는 횡보강근체적지수가 0.233 이상이 요구되었다.

외부 하중에 따른 세그먼트 라이닝 변형과 보강용 내부 강재 라이닝의 거동 특성 (Deformation of segment lining and behavior characteristics of inner steel lining under external loads)

  • 이경주;송기일
    • 한국터널지하공간학회 논문집
    • /
    • 제26권3호
    • /
    • pp.255-280
    • /
    • 2024
  • 쉴드TBM 터널에서 단면 부족이나 큰 변형이 세그먼트 라이닝의 안정성에 우려될 경우 터널 외부에 지반 그라우팅으로 보강하거나 터널 내부에 강판 보강, 링 빔 보강, Inner double layer lining으로 보강하는 경우가 있다. 또한, 기존의 쉴드 TBM 터널의 해석은 세그먼트라이닝의 분절 특성을 고려하지 않는 연속체의 강성일체법으로 해석되어왔다. 본 연구는 내부 강재 라이닝으로 보강한 double layer 보강 단면에 대해 보강 메커니즘을 연구하였다. 본 연구는 세그먼트 라이닝에 대한 모델링을 개선하여 세그먼트 라이닝의 분절 특성을 고려한 분절체 모델링(BJM)을 적용하였고 이를 통해 세그먼트 라이닝의 변형 특성을 반영한 double layer 보강 단면을 해석하였다. 연구 결과 기존 콘크리트 세그먼트 라이닝은 하중을 일정부분 분담하는 역할이 아닌 터널 주변 지반을 보강한 것과 같은 역할을 하였다. 일반적으로, 세그먼트 라이닝의 분절을 고려한 BJM 모델과 분절을 고려하지 않는 강성일체법 모두 하중을 받은 라이닝의 변형 형상과 응력 분포가 유사하게 나타났다. 그러나 하중의 강도가 임계치를 넘는 경우 변형의 양상에 차이가 있으며 변형 특성을 보다 면밀히 검토할 수 있는 것으로 나타났다.

순수형 보강토교대의 슬래브교에 대한 적용성 및 외적/내적 안정성 검토 (A Study on Applicability and External / Internal Stability of true MSEW abutment with slab)

  • 박민철
    • 한국산학기술학회논문지
    • /
    • 제19권5호
    • /
    • pp.263-274
    • /
    • 2018
  • 본 연구에서는 순수형 보강토교대의 상부구조로 적용되는 슬래브교에 대한 적용성을 검토하고 보강토 교대의 외적/내적 안정성에 대해 검토하였다. 상부구조인 슬래브교의 연장은 10.0 m ~ 20.0 m, 두께는 0.7 m ~ 0.9 m를 대상으로 하여 구조해석을 수행하여 보강토교대의 교량받침에 작용되는 사하중과 활하중에 의한 반력을 산정하였다. 슬래브교는 연장 20.0m까지 순수형 보강토교대의 허용 접지압 200 kPa을 만족하였다. 순수형 보강토교대의 외적 안정성은 보강토체의 기하형상에 지배되기 때문에 상부구조의 하중에 의한 안전율 변화는 작은 것으로 나타났다. 지지력에 대한 안전율은 기초지반의 강성은 상수이지만 활동력인 상부구조의 하중은 증가되므로 감소되었다. 그리고 상부구조로 인해 보강토옹벽 상단에 작용하는 접지압이 200 kPa을 초과할 경우, 순수형 보강토교대에서는 전면벽체에 작용하는 수평토압이 과도하게 증가되어, 최상단 보강재에서 내적안정성인 인발과 파단에서 허용안전율을 만족하지 못하였다. 순수형 보강토교대의 효율적 설계 및 성능 확보를 위해서는 보강토체 상단에 배치된 보강재의 인발저항력과 장기허용인장력을 증가시키는 것이 필요한 것으로 분석된다.

인공신경망을 이용한 터널 건전도 평가시스템 개발 (A study on the development of tunnel soundness evaluation system using artificial neural network)

  • 김현우;김영근;이희근
    • 터널과지하공간
    • /
    • 제9권1호
    • /
    • pp.48-55
    • /
    • 1999
  • 터널에서 콘크리트 라이닝은 미관상의 개선과 지하수 침투방지 목적 이외에 하중지지를 분담하는 보조적 역할을 수행하는 것으로 볼 수 있다. 따라서 터널 라이닝에 발생한 균열이나 변형이 단순하게 사용재료나 시공상의 결함에 기인하는 것인지, 혹은 구조적으로 외력 등이 작용하여 생겨난 현상인지 규명하는 작업은 터널 안전성 확보 측면에서 매우 중요하다. 또한 원이 규명결과와 그 외 관찰 가능한 현상을 기초로 하여 터널의 건전도를 평가하고, 최종적으로 보수보강이 요구되는 경우 적절한 대책을 제시할 필요가 있다. 본 연구에서는 이와 같은 필요성에 따라 라이닝과 노반의 주요 변상현상 및 주변환경조건에 근거한 변상원인의 추론, 터널 건전도 평가, 보수보강대책 제시 등의 기능을 갖춘 터널 건전도 평가시스템을 개발하였다. 이 시스템은 라이닝의 변상을 크게 외력에 의한 변상, 재질 열화, 및 누수는 균열의 혀태와 특닝을 이용해 원인을 규명하였다. 그리고 실제 적용되고 있는 기준들을 조사하여 시스템에 반영함으로써 사용자가 입력한 내용과 추론결과에 따라 터널에 대한 건전도를 평가하고 적절한 보수보강대책을 제시하는 과정을 추가하였다. 개발된 시스템에 터널 변상 사례를 입력하여 얻은 결과와 동일 사례에 대한 전문가의 판정을 비교함으로써 외력에 의한 변상의 경우 인공신경망을 이용한 원인추론이 가능함을 확인할 수 있었다. 또한 라이닝 및 노반의 변상현상 뿐만 아니라 터널 시공조건 및 주변환경조건이 함께 주어졌을 때 더욱 정확한 결론을 얻을 수 있었으며, 원인 추론 및 건전도 평가결과를 기초로 구체적이고 효율적인 보수보강 대책을 제시할 수 있었다.

  • PDF

Strength deterioration of reinforced concrete column sections subject to pitting

  • Greco, Rita;Marano, Giuseppe Carlo
    • Computers and Concrete
    • /
    • 제15권4호
    • /
    • pp.643-671
    • /
    • 2015
  • Chloride induced reinforcement corrosion is widely accepted to be the most frequent mechanism causing premature degradation of reinforced concrete members, whose economic and social consequences are growing up continuously. Prevention of these phenomena has a great importance in structural design, and modern Codes and Standards impose prescriptions concerning design details and concrete mix proportion for structures exposed to different external aggressive conditions, grouped in environmental classes. This paper focuses on reinforced concrete column section load carrying capacity degradation over time due to chloride induced steel pitting corrosion. The structural element is considered to be exposed to marine environment and the effects of corrosion are described by the time degradation of the axial-bending interaction diagram. Because chlorides ingress and consequent pitting corrosion propagation are both time-dependent mechanisms, the study adopts a time-variant predictive approach to evaluate residual strength of corroded reinforced concrete columns at different lifetimes. Corrosion initiation and propagation process is modelled by taking into account all the parameters, such as external environmental conditions, concrete mix proportion, concrete cover and so on, which influence the time evolution of the corrosion phenomenon and its effects on the residual strength of reinforced concrete columns sections.

An Approach to the Localization of Technology for a Transport and Storage Container for Very Low-Level Radioactive Liquid Waste

  • Shin, Seung Hun;Choi, Woo Nyun;Yoon, Seungbin;Lee, Un Jang;Park, Hye Min;Kim, Hee Reyoung
    • 방사성폐기물학회지
    • /
    • 제20권1호
    • /
    • pp.127-131
    • /
    • 2022
  • The structural safety of prototype transport and storage containers for very low-level radioactive liquid waste was experimentally estimated for its localization development. Transport containers for radioactive liquid waste have been researched and developed, however, there are no standardized commercial containers for very low-level radioactive waste in Korea. In this study, the structural safety of the designated IP-2 type container capable of transporting and temporarily storing large amounts of very low-level liquid waste, which is generated during the operation and decommissioning of nuclear power plants, was demonstrated. The stacking and drop tests, which were conducted to determine the structural integrity of the container, verified that there was no external leakage of the contents in spite of its structural deformation due to the drop impact. This study shows the effort required for the localization of the technology used in manufacturing transport and storage containers for very low-level radioactive liquid waste, and the additional structural reinforcement of the container in which the commercial intermediate bulk container (IBC) external frame was coupled.

Experimental evaluation of external beam-column joints reinforced by deformed and plain bar

  • Adibi, Mahdi;Shafaei, Jalil;Aliakbari, Fatemeh
    • Earthquakes and Structures
    • /
    • 제18권1호
    • /
    • pp.113-127
    • /
    • 2020
  • In this study, the behavior of external beam-column joints reinforced by plain and deformed bars with non-seismic reinforcement details is investigated and compared. The beam-column joints represented in this study include a benchmark specimen by seismic details in accordance with ACI 318M-11 requirements and four other deficient specimens. The main defects of the non-seismic beam-column joints included use of plain bar, absence of transverse steel hoops, and the anchorage condition of longitudinal reinforcements. The experimental results indicate that using of plain bars in non-seismic beam-column joints has significantly affected the failure modes. The main failure mode of the non-seismic beam-column joints reinforced by deformed bars was the accumulation of shear cracks in the joint region, while the failure mode of the non-seismic beam-column joints reinforced by plain bars was deep cracks at the joint face and intersection of beam and column and there was only miner diagonal shear cracking at the joint region. In the other way, use of plain bars for reinforcing concrete can cause the behavior of the substructure to be controlled by slip of the beam longitudinal bars. The experimental results show that the ductility of non-seismic beam-column joints reinforced by plain bars has not decreased compared to the beam-column joints reinforced by deformed bars due to lack of mechanical interlock between plain bars and concrete. Also it can be seen a little increase in ductility of substructure due to existence of hooks at the end of the development length of the bars.

프랜차이즈 시스템에서 브랜드 자산, 내부브랜드 활동, 갈등 및 관계해지의 구조적 관계에 관한 탐색적 연구 (An Exploratory Study on the Structural Relationship of Brand Equity, Internal Brand, Conflict and Relationship Dissolution on Franchise System)

  • 김경민;나준희;이영찬
    • 한국유통학회지:유통연구
    • /
    • 제12권1호
    • /
    • pp.65-84
    • /
    • 2007
  • 본 연구는 프랜차이즈 시스템에 참여하는 본부와 가맹점 관계를 브랜드 중심으로 관계해지 및 구조적인 관련성에 대해서 설명하고자 하였다. 즉, 프랜차이즈 시스템에 있어서 브랜드 자산, 내부브랜드 활동, 갈등과 관계해지 간에 어떠한 관련성이 있는 지를 브랜드를 중심으로 연구하였다. 연구방법은 브랜드를 외생적 요인과 내생적 요인으로 구분하여 탐색적 연구를 진행하였다. 실증대상은 국내 프랜차이즈 시스템에 참여하고 있는 가맹점이다. 연구결과, 브랜드의 외생적 요인인 거래특유 투자와 브랜드 자산, 브랜드 커뮤니케이션은 브랜드의 내생적 요인인 브랜드 내재화와 갈등에 영향을 미쳤으며, 관계해지에도 영향을 주는 것으로 나타났다. 또한 브랜드의 내생적 요인은 관계해지에 영향을 주는 것으로 나타났다. 이를 통해 본 연구는 프랜차이즈 시스템의 지속적인 관계유지를 위해 브랜드의 역할에 대한 이론적, 관리적 시사점을 도출하였다.

  • PDF

천매암 지역에서의 비탈면 붕괴 원인규명 및 보강대책 사례연구 (A Case Study on the Slope Collapse and Reinforcement Method of the Phyllite Slope)

  • 조영훈;임대성;천병식
    • 한국지반환경공학회 논문집
    • /
    • 제11권8호
    • /
    • pp.83-93
    • /
    • 2010
  • 본 연구는 천매암지역에서 발생한 보강토옹벽 및 배후비탈면 붕괴사고에 대한 응급복구, 원인규명 및 보강대책을 마련하는 데에 그 목적이 있다. 연구대상현장은 암반내 층리, 엽리, 절리 그리고 습곡 등과 같은 암반불연속면이 발달해 쉽게 부스러지며 풍화에 민감한 천매암질 지반으로써 보강토옹벽 등과 같은 구조물의 붕괴가 유리한 지반으로 구성되어 있다. 이러한 천매암지반에서의 보강토옹벽의 과변위와 배후 비탈면의 붕괴에 대한 응급복구로써 보강토옹벽의 전면에 압성토를 실시하였고, 압성토 실시후 추가적인 변위는 발생하지 않았다. 원인규명과 장기적인 보강대책 마련을 위해 실시한 시추조사와 물리탐사에서 예상파괴구간의 범위를 파악할 수 있었고 이를 통해 비탈면의 붕괴원인의 내적 외적 요인을 구명할 수 있었다. 이와 더불어 실시한 수치해석을 통해 몇 가지의 보강대책을 제시하였다. 천매암지반과 같은 복잡한 불연속면을 가지는 지질 조건에서 주요 구조물 설계 및 시공시 정밀한 지반조사를 실시해야하며 구조물 시공시 주기적인 계측을 실시하여 과변위에 대한 즉각적인 조처를 취해야 할 것이다.