• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1212-1215
• /
• 2002

This paper proposes the system that automatically cognizes the external interface cards on control board. This system is proposed by this paper endows with ID to external interface card and cognizes a connection of external interface card. Also this system automatically executes a task for external interface card. This system has an extension of function according to cognize an external interface card and is fast the execution.

• 한국통신학회논문지
• /
• 제30권2B호
• /
• pp.1-10
• /
• 2005

빠른 데이터 처리를 위하여 기존에는 소프트웨어방식으로 구현되었던 TCP/IP를 고속의 하드웨어로 구현함에 있어, TCP/IP 하드웨어와 외부 블록간의 통신을 중계하는 블록인 Host Interface를 구현하였다. Host Interface는 TCP/IP 하드웨어와 외부 블록의 중간에 위치하여 외부 블록과의 통신을 위해 AMBA AHB 규약을 따른다. Host Interface는 내부의 Command/Status Register를 통하여 CPU와 TCP/IP 하드웨어 간의 명령, 상태, 헤더 정보 등을 전달하는데 이 때에는 AMBA AHB의 Slave로서 동작한다. Data Flow를 위해서 Host Interface는 AMBA AHB의 Master로서 동작하는데, 데이터 흐름의 방향에 따라 Data flow는 데이터를 수신하는 Receive flow와 데이터를 패킷으로 만들어 보내는 Transmit Flow로 나된다. Rx Flow의 경우, UDP 블록이나 TCP Buffer로부터 받은 데이터를 내부의 작은 RxFIFO를 통해 외부 RxRAM에 써서 CPU가 읽어갈 수 있도록 하고, Tx Flow의 경우에는 외부 TxRAM에서 전송할 데이터를 읽어 와서 TxFIFO를 거쳐 UDP Buffer나 TCP Buffer에 씀으로써 패킷을 만들어 보내도록 한다. 외부 RAM의 액세스에는 Command/Status Register에 위치한 Buffer Descriptor의 정보를 이용하게 된다. Host Interface는 이러한Data Flow의 원활한 흐름을 위해서 여러 세부 기능들을 수행하게 된다. Host Interface의 기능을 검증하기 위하여 여러 testcase들이 수행되었으며, 0.18 마이크론 기술을 사용하여 synthesis한 결과, 내부의 Command/Status Register와 FIFO를 모두 포함하여 약 173K 게이트가 소요됨을 보았다.

• The Journal of Advanced Prosthodontics
• /
• 제8권6호
• /
• pp.465-471
• /
• 2016

PURPOSE. The purpose of this study is to evaluate the stability of interface between Co-Cr-Mo (CCM) UCLA abutment and external hex implant. MATERIALS AND METHODS. Sixteen external hex implant fixtures were assigned to two groups (CCM and Gold group) and were embedded in molds using clear acrylic resin. Screw-retained prostheses were constructed using CCM UCLA abutment and Gold UCLA abutment. The external implant fixture and screw-retained prostheses were connected using abutment screws. After the abutments were tightened to 30 Ncm torque, 5 kg thermocyclic functional loading was applied by chewing simulator. A target of $1.0{\times}10^6$cycles was applied. After cyclic loading, removal torque values were recorded using a driving torque tester, and the interface between implant fixture and abutment was evaluated by scanning electronic microscope (SEM). The means and standard deviations (SD) between the CCM and Gold groups were analyzed with independent t-test at the significance level of 0.05. RESULTS. Fractures of crowns, abutments, abutment screws, and fixtures and loosening of abutment screws were not observed after thermocyclic loading. There were no statistically significant differences at the recorded removal torque values between CCM and Gold groups (P>.05). SEM analysis revealed that remarkable wear patterns were observed at the abutment interface only for Gold UCLA abutments. Those patterns were not observed for other specimens. CONCLUSION. Within the limit of this study, CCM UCLA abutment has no statistically significant difference in the stability of interface with external hex implant, compared with Gold UCLA abutment.

• 대한치과보철학회지
• /
• 제41권4호
• /
• pp.393-404
• /
• 2003

Statement of problem. Higher incidence of prosthetic complications such as screw loosening, screw fracture has been reported for posterior single tooth implant. So, there is ongoing research regarding stability of implant-abutment interface. One of those research is increasing the implant diameter and prosthetic table width to improve joint stability. In another part of this research, internal conical type implant-abutment interface was developed and reported joint strength is higher than traditional external hex interface. Purpose. The purpose of this study is to compare stress distribution in single molar implant between external hex butt joint implant and internal conical joint implant when increasing the implant diameter and prosthetic table width : 4mm diameter, 5mm diameter, 5mm diameter/6mm prosthetic table width. Material and method. Non-linear finite element models were created and the 3-dimensional finite element analysis was performed to see the distribution of stress when 300N static loading was applied to model at $0^{\circ},\;15^{\circ},\;30^{\circ}$ off-axis angle. Results. The following results were obtained : 1. Internal conical joint showed lower tensile stress value than that of external hex butt joint. 2. When off-axis loading was applied, internal conical joint showed more effective stress distribution than external hex butt joint. 3. External hex butt joint showed lower tensile stress value when the implant diameter was increased. 4. Internal conical joint showed lower tensile stress value than external hex butt joint when the implant diameter was increased. 5. Both of these joint mechanism showed lower tensile stress value when the prosthetic table width was increased. Conclusion. Internal conical joint showed more effective stress distribution than external hex joint. Increasing implant diameter showed more effective stress distribution than increasing prosthetic table width.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.236-239
• /
• 2008

Korea Aerospace Research Institute (KARI) has been trying for utilizing the polar station in Svalbard, Norway to receive the KOMPSAT-2 images, which are distributed and applied directly for Europe Space Agency (ESA) users. Now, KARI is operating the SpaceCapture-2 system that provides the KOMPSAT-2 catalogue service via the internet, whereas ESA is operating the EOLI-SA tool that provides access to the online ESA catalogues of Earth Observation (EO) products. This paper describes external interface based on service-oriented architecture in order to provide the KOMPSAT-2 catalogue service from the SpaceCapture-2 system to the EOLI-SA tool. As the KOMPSAT-2 catalogue service is available in the EOLI-SA tool through an implementation of external interface, the extend use of KOMPSAT-2 imageries is expected.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제9권1호
• /
• pp.1-10
• /
• 2020

유동적으로 변화하는 환경에서 사용자의 요구에 따라 서비스를 제공하는 서비스 로봇은 클라우드 서비스와 같은 외부 서비스를 이용할 수 있어야 한다. 그러나 클라우드 서비스는 지속해서 변화하고 확장되므로 서비스의 기능 및 데이터 변경에 적응할 수 있는 일반적이고 유연한 인터페이스가 필요하다. 이를 위해 다양한 클라우드 서비스에 대한 모델 기반의 일반적인 인터페이스를 활용하여야 한다. 이러한 접근 방법을 통해 변경된 서비스에 접근할 수 있는 표준 서비스 프로파일을 정의함으로써 일반적이고 확장 가능한 인터페이스를 구현하였다. 또한, 지능형 서비스 로봇을 활용한 실험을 통해 새로운, 혹은 변경된 외부 서비스에 대해 유연하게 적응하는 결과를 검증하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.535-536
• /
• 2006

In the embedded system, external device interface that operates serial protocol with lower speed than the general computers is used commonly. This paper describes I2C bus protocol that is a bi-directional serial bus with a two-pin interface. The I2C bus requires a minimum amount of hardware to relay status and reliability information concerning the processor subsystem to an external device.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2407-2409
• /
• 2005

As the cumulative amount of spent fuel increases, the reliable and effective management of the spent fuel has become a world-wide mission. For this mission, KAERI is developing the Advanced Spent Fuel Conditioning Process (ACP) as a pre-disposal treatment process for spent fuel. Conventional approach to the development of the process and the remote operation technology is to fabricate the process equipment on the same scale as the real environment and demonstrate the remote handling operation using simulated fuel called a mock-up test. But this mock-up test is expensive and time consuming, since the design may need to be modified and the equipment fabricated again to account for the problems found during a testing. To deal with this problem, we developed a digital mockup for the ACP. Also, for an effective utilization of the digital mockup, we developed user interface modules such as the data acquisition and display module and the external input device interface module. The result of this implementation shows that a continuous motion of the manipulator using the external device interface can be represented easily and the information display screens responded well to the simulation situation.

• 한국전기전자재료학회논문지
• /
• 제14권7호
• /
• pp.578-583
• /
• 2001

The bushing for high voltage and large and power should endure weight of itself and force of pushing from contact with circuit breaker. Like this, epoxy mold bushing has to be strong without fault. However, the external circumstances and internal factors was caused by partial discharge, flashover and dielectric breakdown. Therefore, to remove external factor of defect and to prevent the internal cracks and cavity generated from the contraction on interface of Cu-Epoxy, we should form semi-conductive layer on Cu bar by carbon. Then, the PD properties and the insulation qualities of epoxy mold type bushing was able to improved by roles of cushions for the direction of diameter and by effects fo natural sliding like as separated from conductor for the direction of length. So, in this work, we could prove the method of semi-conductive layer in making the long conductor.

• Journal of Multimedia Information System
• /
• 제8권1호
• /
• pp.17-22
• /
• 2021

This paper proposes a wearable user interface intended for kids and parents using WearOS smartwatches. We first review what constitutes a kids smartwatch and then design UI components for watchfaces to be used by kids and parents. Different UI components ranging from activity, education, voice search, app usage, video, location, health, and quick dial are described. These components are either implemented as complications or on watchfaces and may require on-device standalone function, cross-device communication, and external database. We introduce a theme-based amusing UI for kids whereas simple and easily accessible components are recommended to parents' watchface. To illustrate use cases, we present 3 scenarios for enhancing communication between parents and child. To show feasibility and potential of our approach, we implement our proof-of-concept using commercial smartwatches, smartphones, and external cloud database. Furthermore, performance of checking app usages on different devices are presented, followed by discussion on limitations and future work.