• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1212-1215
• /
• 2002

This paper proposes the system that automatically cognizes the external interface cards on control board. This system is proposed by this paper endows with ID to external interface card and cognizes a connection of external interface card. Also this system automatically executes a task for external interface card. This system has an extension of function according to cognize an external interface card and is fast the execution.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2B
• /
• pp.1-10
• /
• 2005

TCP/IP protocols have been implemented in software program running on CPU in end systems. As the increased demand of fast protocol processing, it is required to implement the protocols in hardware, and Host Interface is responsible for communication between external CPU and the hardware blocks of TCP/IP implementation. The Host Interface follows AMBA AHB specification for the communication with external world. For control flow, the Host Interface behaves as a slave of AMBA AHB. Using internal Command/status Registers, the Host Interface receives commands from CPU and transfers hardware status and header information to CPU. On the other hand, the Host Interface behaves as a master for data flow. Data flow has two directions, Receive Flow and Transmit Flow. In Receive Flow, using internal RxFIFO, the Host Interface reads data from UDP FIFO or TCP buffer and transfers data to external RAM for CPU to read. For Transmit Flow, the Host Interface reads data from external RAM and transfers data to UDP buffer or TCP buffer through internal TxFIFO. TCP/IP hardware blocks generate packets using the data and transmit. Buffer Descriptor is one of the Command/Status Registers, and the information stored in Buffer Descriptor is used for external RAM access. Several testcases are designed to verify TCP/IP functions. The Host Interface is synthesized using the 0.18 micron technology, and it results in 173 K gates including the Command/status Registers and internal FIFOs.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.6
• /
• pp.465-471
• /
• 2016

PURPOSE. The purpose of this study is to evaluate the stability of interface between Co-Cr-Mo (CCM) UCLA abutment and external hex implant. MATERIALS AND METHODS. Sixteen external hex implant fixtures were assigned to two groups (CCM and Gold group) and were embedded in molds using clear acrylic resin. Screw-retained prostheses were constructed using CCM UCLA abutment and Gold UCLA abutment. The external implant fixture and screw-retained prostheses were connected using abutment screws. After the abutments were tightened to 30 Ncm torque, 5 kg thermocyclic functional loading was applied by chewing simulator. A target of $1.0{\times}10^6$cycles was applied. After cyclic loading, removal torque values were recorded using a driving torque tester, and the interface between implant fixture and abutment was evaluated by scanning electronic microscope (SEM). The means and standard deviations (SD) between the CCM and Gold groups were analyzed with independent t-test at the significance level of 0.05. RESULTS. Fractures of crowns, abutments, abutment screws, and fixtures and loosening of abutment screws were not observed after thermocyclic loading. There were no statistically significant differences at the recorded removal torque values between CCM and Gold groups (P>.05). SEM analysis revealed that remarkable wear patterns were observed at the abutment interface only for Gold UCLA abutments. Those patterns were not observed for other specimens. CONCLUSION. Within the limit of this study, CCM UCLA abutment has no statistically significant difference in the stability of interface with external hex implant, compared with Gold UCLA abutment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.4
• /
• pp.393-404
• /
• 2003

Statement of problem. Higher incidence of prosthetic complications such as screw loosening, screw fracture has been reported for posterior single tooth implant. So, there is ongoing research regarding stability of implant-abutment interface. One of those research is increasing the implant diameter and prosthetic table width to improve joint stability. In another part of this research, internal conical type implant-abutment interface was developed and reported joint strength is higher than traditional external hex interface. Purpose. The purpose of this study is to compare stress distribution in single molar implant between external hex butt joint implant and internal conical joint implant when increasing the implant diameter and prosthetic table width : 4mm diameter, 5mm diameter, 5mm diameter/6mm prosthetic table width. Material and method. Non-linear finite element models were created and the 3-dimensional finite element analysis was performed to see the distribution of stress when 300N static loading was applied to model at $0^{\circ},\;15^{\circ},\;30^{\circ}$ off-axis angle. Results. The following results were obtained : 1. Internal conical joint showed lower tensile stress value than that of external hex butt joint. 2. When off-axis loading was applied, internal conical joint showed more effective stress distribution than external hex butt joint. 3. External hex butt joint showed lower tensile stress value when the implant diameter was increased. 4. Internal conical joint showed lower tensile stress value than external hex butt joint when the implant diameter was increased. 5. Both of these joint mechanism showed lower tensile stress value when the prosthetic table width was increased. Conclusion. Internal conical joint showed more effective stress distribution than external hex joint. Increasing implant diameter showed more effective stress distribution than increasing prosthetic table width.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.236-239
• /
• 2008

Korea Aerospace Research Institute (KARI) has been trying for utilizing the polar station in Svalbard, Norway to receive the KOMPSAT-2 images, which are distributed and applied directly for Europe Space Agency (ESA) users. Now, KARI is operating the SpaceCapture-2 system that provides the KOMPSAT-2 catalogue service via the internet, whereas ESA is operating the EOLI-SA tool that provides access to the online ESA catalogues of Earth Observation (EO) products. This paper describes external interface based on service-oriented architecture in order to provide the KOMPSAT-2 catalogue service from the SpaceCapture-2 system to the EOLI-SA tool. As the KOMPSAT-2 catalogue service is available in the EOLI-SA tool through an implementation of external interface, the extend use of KOMPSAT-2 imageries is expected.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.1
• /
• pp.1-10
• /
• 2020

Service robots providing services according to user's needs in dynamically changing environments should be able to utilize external services such as cloud services. Cloud services are, however, changing and expanding continuously and thus the interface to the services must be general and flexible to adapt to the changes of the functionality and data of the services. In order to facilitate the adaptation of the interface to the changes, a model-based general interface to various cloud services is proposed. In this approach, a general and extensible interface is realized by defining standard service profiles that can be easily extended to adapt to the changed services. Experiments with intelligent service robots show satisfying results exhibiting flexible adaptations to new or changed external services.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.535-536
• /
• 2006

In the embedded system, external device interface that operates serial protocol with lower speed than the general computers is used commonly. This paper describes I2C bus protocol that is a bi-directional serial bus with a two-pin interface. The I2C bus requires a minimum amount of hardware to relay status and reliability information concerning the processor subsystem to an external device.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2407-2409
• /
• 2005

As the cumulative amount of spent fuel increases, the reliable and effective management of the spent fuel has become a world-wide mission. For this mission, KAERI is developing the Advanced Spent Fuel Conditioning Process (ACP) as a pre-disposal treatment process for spent fuel. Conventional approach to the development of the process and the remote operation technology is to fabricate the process equipment on the same scale as the real environment and demonstrate the remote handling operation using simulated fuel called a mock-up test. But this mock-up test is expensive and time consuming, since the design may need to be modified and the equipment fabricated again to account for the problems found during a testing. To deal with this problem, we developed a digital mockup for the ACP. Also, for an effective utilization of the digital mockup, we developed user interface modules such as the data acquisition and display module and the external input device interface module. The result of this implementation shows that a continuous motion of the manipulator using the external device interface can be represented easily and the information display screens responded well to the simulation situation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.7
• /
• pp.578-583
• /
• 2001

The bushing for high voltage and large and power should endure weight of itself and force of pushing from contact with circuit breaker. Like this, epoxy mold bushing has to be strong without fault. However, the external circumstances and internal factors was caused by partial discharge, flashover and dielectric breakdown. Therefore, to remove external factor of defect and to prevent the internal cracks and cavity generated from the contraction on interface of Cu-Epoxy, we should form semi-conductive layer on Cu bar by carbon. Then, the PD properties and the insulation qualities of epoxy mold type bushing was able to improved by roles of cushions for the direction of diameter and by effects fo natural sliding like as separated from conductor for the direction of length. So, in this work, we could prove the method of semi-conductive layer in making the long conductor.

• Journal of Multimedia Information System
• /
• v.8 no.1
• /
• pp.17-22
• /
• 2021

This paper proposes a wearable user interface intended for kids and parents using WearOS smartwatches. We first review what constitutes a kids smartwatch and then design UI components for watchfaces to be used by kids and parents. Different UI components ranging from activity, education, voice search, app usage, video, location, health, and quick dial are described. These components are either implemented as complications or on watchfaces and may require on-device standalone function, cross-device communication, and external database. We introduce a theme-based amusing UI for kids whereas simple and easily accessible components are recommended to parents' watchface. To illustrate use cases, we present 3 scenarios for enhancing communication between parents and child. To show feasibility and potential of our approach, we implement our proof-of-concept using commercial smartwatches, smartphones, and external cloud database. Furthermore, performance of checking app usages on different devices are presented, followed by discussion on limitations and future work.