• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.3
• /
• pp.347-353
• /
• 2012

Recently, multi-functionalization (as in smart phones) has been in demand, and the connectors connecting the electrical signals of each board in a cellular phone have become key components. The miniaturization of these connectors is required to achieve a finer pitch design and enhance the electrical signal transfer capacity. However, the miniaturization of connectors reduces the structural safety, and a finer pitch design may cause contact problems under external impact. In this paper, a preliminary design for miniaturized, finer-pitch connectors is suggested for a product with 50 pins and a thickness of 0.2 mm. The assembly process of the FPCB (Flexible Printed Circuit Board) and connector was simulated to ensure the holding force between the two components and avoid overstressing. The design optimization process was performed with the Taguchi method. Fatigue analysis was also conducted to predict the fatigue life of the terminal, and the theoretical and experimental results were compared.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.129.2-129.2
• /
• 2010

As a part of the government renewable energy policy, KOWEPO is constructing 300MW IGCC plant in Taean. IGCC plant consists of gasification block, air separation unit and power block, which performance test is separately conducted. Overall performance test for IGCC plant is peformed to comply with ASME PTC 46. Major factors affected on the overall efficiency for IGCC plant are external conditions, each block performance(gasification, ASU, power block), water/steam integration and air integration. Performance parameters of IGCC plant are cold gas efficiency, oxygen consumption, sensible heat recovery of syngas cooler for gasification block and purity of oxygen, flow amount of oxygen and nitrogen, power consumption for air separation unit and steam/water integration among the each block. The gas turbine capacity applied to the IGCC plant is 20 percent higher than NGCC gas turbine due to the low caloric heating value of syngas, therefor it is possible to utilize air integration between gas turbine and air separation unit to improve overall efficiency of the IGCC plant and there is a little impact on the ambient condition. It is very important to optimize the air integration design with consideration to the optimized integration ratio and the reliable operation. Optimized steam/water integration between power block and gasification block can improve overall efficiency of IGCC plant where the optimized heat recovery from gasification block should be considered. Finally, It is possibile to achieve the target efficiency above 42 percent(HHV, Net) for 300MW Taean IGCC plant by optimized design and integration.

• Archives of Plastic Surgery
• /
• v.43 no.6
• /
• pp.529-535
• /
• 2016

Background The trapezius muscle flap is not usually the first reconstructive option for skin and soft tissue defects in the posterior neck and scalp due to surgeons' unfamiliarity with the surgical anatomy and developments in free tissue transfer techniques. The goals of this study were to describe the clinical use of trapezius flaps in posterior neck and scalp reconstruction, and to investigate the vascular anatomy of trapezius flaps in Asians in order to obtain information facilitating the safe design and elevation of flaps in which most of the muscle is preserved. Methods A retrospective chart review was performed of 10 patients who underwent trapezius muscle flap for posterior neck and scalp defects. We also performed an anatomical study of 16 flaps harvested from 8 preserved Asian adult cadavers and evaluated the main landmarks relevant for trapezius muscle flap. Results In the anatomical study, the mean vertical height from the inferior angle of the scapula to the point at which the superficial cervical artery penetrated the trapezius was $4.31{\pm}2.14cm$. The mean vertical height of the trapezius muscle flap pivot point was $9.53{\pm}2.08cm$ from the external occipital protuberance. Among the 10 flaps, partial necrosis on the overlaid skin graft occurred in 1 patient and postoperative seroma occurred in another patient. Conclusions Vascular variations in the trapezius muscle flap are uncommon in Asians, but when present, such variations appear to have little impact on harvesting the flap or on its circulation. The trapezius muscle flap is a viable alternative for posterior neck and scalp reconstruction.

• Informatization Policy
• /
• v.17 no.4
• /
• pp.80-99
• /
• 2010

A substantial body of theoretical and case study literature exists about the relationship between competition and universal service in developing countries. On the one hand, many scholars have argued that state-owned monopolies in developing countries are not able to mobilize the capital needed for network expansion: the resulting unmet demand for services becomes a motivator for liberalization. On the other hand, the introduction of competition jeopardizes the internal and external subsidies through which the state-owned monopoly kept subscription rates low: the heightened concern about loss of subscribership incentivizes the creation of explicit universal service statutes and funding mechanisms concurrently with or soon after competition is introduced. This paper shows that universal service in Korea had a unique evolutionary path, which did not conform to either of these expectations. From this finding, it reaches the conclusion that the outcomes predicted by theory and observed in the case study literature are not intrinsic to the monopoly condition per se, but derive from the strategic choices made by telecommunications managers, regulators and lawmakers in developing countries.

• Journal of Digital Convergence
• /
• v.13 no.10
• /
• pp.459-470
• /
• 2015

The study was conducted to find out way that improves service quality for external customers by identifying the impact of Total Quality Management(TQM) on the internal customer satisfaction and then raising the personnel satisfaction measurement in medical institutions. To this end, we carried out a survey of 500 employees from five university hospitals in three metropolitan cities of Busan, Deagu and Ulsan and Gyeongsangnam-do province from February 2 to April 30, 2015, and utilized 476 cases for this study finally. First, in the result of analysis, the leadership of management hierarchy affects education and training and employee participation, but not human resource management nor quality of the work among quality management activities. Secondly, the culture of medical service organization has an effect on every variable of quality management activities. And finally, internal customer satisfaction is influenced by quality management activities, the leadership of management hierarchy and the culture of medical service organization.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.314-321
• /
• 2009

This study investigates how the external factors of police organization, such as organizational environments, job characteristics, and compensations can influence job satisfaction and organizational commitment. Especially, this study considers what kind of organizational culture is dominant and what kind of compensation influences job satisfaction and organizational commitment in Korea. The purpose of this study is to find out the ways to maximize compensation and job satisfaction of police officers and to improve organizational commitment. The results are as follows: First, the more perceived job interest, social approval, organizational cohesion, and financial compensation, the higher job satisfaction, whereas the more perceived work environment, the lower job satisfaction. Second, the more perceived job interest, social approval, organizational cohesion, and financial compensation, the higher job satisfaction. However, the perceived work environment does not influence the job satisfaction. Third, the higher job satisfaction, the higher organizational commitment. Fourth, organizational cohesion, financial compensation and organizational environment have an effect on organizational commitment mediated by job satisfaction.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.8
• /
• pp.1132-1140
• /
• 2011

When the offshore wind power plant is planned to construct, it is important for the wind farm site to figure out the distribution of the weak soil layers that might cause subsidence by the impact of the external moment from the wind plant's load and an oscillating wind load. Coring test is the optimistic method to figure out weak soil layers, but this method have some problem such as condition of the in-situ or economical limitation. In order to make up for the weak points in coring test, the researches using the geostatistics methods is actually done. In this study, setting a fixed coastal area that offshore wind plants construct firstly and Estimation of distribution on the thickness of the weak soil layer through the geostatistic method is conducted. The weak soil layer is sorted by result of the Standard penetration test, geostatistic method is used to ordinary kring and sequential gaussian simulation and compared to both method's result. As a results of study, we found that both methods show similar estimations of deep weak soil layer and we could evaluate quantitatively the uncertainty of the result.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.4 s.175
• /
• pp.1007-1015
• /
• 2000

This paper proposes an adaptive trajectory generation strategy of using on-line ZMP information and an impedance control method for biped robots. Since robots experience various disturbances during their locomotion, their walking mechanism should have the robustness against those disturbances, which requires an on-line adaptation capability. In this context, an on-line trajectory planner is proposed to compensate the required moment for recovering stability. The ZMP equation and sensed ZMP information are used in this trajectory generation strategy. In order to control a biped robot to be able to walk stably, its controller should guarantee stable footing at the moment of feet contacts with the ground as well as maintaining good trajectory tracking performance. Otherwise, the stability of robot will be significantly compromised. To reduce the magnitude of an impact and guarantee a stable footing when a foot contacts with the ground, this paper. proposes to increase the damping of the leg drastically and to modify the reference trajectory of the leg. In the proposed control scheme, the constrained leg is controlled by impedance control using the impedance model with respect to the base link. Computer simulations performed with a 3-dof environment model that consists of combination of a nonlinear and linear compliant contact model show that the proposed controller performs well and that it has robustness against unknown uneven surface. Moreover, the biped robot with the proposed trajectory generator can walk even when it is pushed with a certain amount of external force.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.27 no.1
• /
• pp.14-17
• /
• 2016

Hoarseness is a postoperative complication of thyroidectomy, mostly due to damage to the recurrent laryngeal nerve (RLN). Hoarseness may also be brought about via vocal cord dysfunction (VCD) due to injury of the vocal cords from manipulations during anesthesia, as well as from psychogenic disorders and respiratory and upper-GI related infections. The clinician or surgeon should 1) document assessment of the patient's voice once a decision has been made to proceed with thyroid surgery ; 2) examine vocal fold mobility, or refer the patient to a clinician who can examine vocal fold mobility 3) examine vocal fold mobility, or refer the patient to a clinician who can examine vocal fold mobility, once a decision has been made to proceed with thyroid surgery 4) educate the patient about the potential impact of thyroid surgery on voice once a decision has been made to proceed with thyroid surgery ; 5) inform the anesthesiologist of the results of abnormal preoperative laryngeal assessment in patients who have had laryngoscopy prior to thyroid surgery ; 6) take steps to preserve the external branch of the surperior laryngeal nerve(s) when performing thyroid surgery ; 7) document whether there has been a change in voice between 2 weeks and 2 months following thyroid surgery ; 8) examine vocal fold mobility or refer the patient for examination of vocal fold mobility in patients with a change in voice following thyroid surgery ; 9) refer a patient to an otolaryngologist when abnormal vocal fold mobility is identified after thyroid surgery ; 10) counsel patients with voice change or abnormal vocal fold mobility after thyroid surgery on options for voice rehabilitation.

• Archives of design research
• /
• v.16 no.4
• /
• pp.101-110
• /
• 2003

This paper is focused on the similarity of GUI design and proposes checklists for evaluating similarity of GUI design in quantitative way and more important factors in this checklists. On the first, consideration of similarity and analysis of GUI properties are made, and from these results, the categories that affect the evaluation of similarity are extracted. The categories are consisted of 5 factors, which are concept, shape, color, relation, and multimedia. The checklists from above 5 categories are tested in 3-stage, and in this paper, 11 checklists from shape, color, and relation factor of the second stage are verified by online survey. The purpose of this survey is to find out the difference between user groups(designer, computer related, etc) and more important factors in the checklists that affect the total results of similarity. In the results of survey, the checklists have no relation with the user groups and among the checklists, external shape, composition element, and design methods have impact factors on the evaluation of similarity.