• 한국안전학회지
• /
• 제10권3호
• /
• pp.96-105
• /
• 1995

The better industry develops, the more spaces need but in the limited area. Most building become larger and more complicated if the more spaces need in the constant area. And this leads to do underground work in long period generally six(6) months for 6 basement stories due to the selection of TOP DOWN technique. Working environment in this underground area can be problems and should not be overlooked, because air quality in underground spaces become quickly worse. Recently, department name to control construction safety has been changed to ENVIRONMENT & SAFETY TEAM from SAFETY TEAM. This means that it is very important to control against environmental condition at site so much. Overall construction work as well as underground work should conform to the requirement of working environment, particularly against inhabitants around the construction area. Strut protection, one of earth protection method, in case to 40m long strut may become weaker due to thermal stress or its longitudinally compressive strain and the another one, earth anchor protection may not be applied to the site In case of encroaching on vertical underground borderline because of regulation to prohibit it. It is necessary that TOP DOWN technique should be introduced in order to solve the external and internal problem of the site such as difficulty level of the work, potential danger with excavating depth, and shortening workperiod. It is needed that improving way of working condition should be shown and simplified computer simulation program should be also provided for checking pollution level & ventilation, excluding of lighting problem here. Results measured with conformance to the Regulation for Working Environment Measurement, enforced by Ministry of Labor have been applied to the computer program developed here. Sample air taken at unit workplace which was considered as exposing condition of pollutant at breathing point and within a range of behavior of the workers, Identified exposing group in underground work, using Moded Flow Life Finally, three types of ventilation system, type I with blower & ventilator, type II natural supply with mechanical ventilation system, and type I mechanical ventilation with Drivent Fan Unit System are selected for this study.

• 대한건축학회논문집:계획계
• /
• 제35권6호
• /
• pp.27-37
• /
• 2019

This study focused on the possibility of reducing the cooling load through the change of micro climate in the outdoor space during summer season. This study proposes an efficient planning model by comparing the effects of urban heat island mitigation through wind path planning, outdoor space vegetation, and exterior material change by using the basic model of the street-oriented block housing proposed in the previous research by the same author. As a result, the most effective wind path planning strategy in the street-oriented block housing was the change of the air flow through the mass height adjustment. When the tall building masses were staggered and arranged in a balanced manner, the overall wind environment could be improved. The greater the height difference between low and high masses, the better the air flow was shown. It was also important to arrange the building masses so that the inlet of the main wind was open and to allow the external space to connect to the adjacent block to create a continuous flow. The change of outdoor space vegetation and flooring, and the formation of wind paths through the opening of lower part also showed the effect of heat island reduction. In addition, the change of PMV in summer was the biggest influence of shadow by tall building mass. Attention should be paid to the fact that high-albedo exterior materials are adversely affected by multiple reflections in dense street-oriented block housing. The use of albedo of the exterior material showed that it is necessary to pay attention to apply in the high density block housing. This is attributed to the rise of the temperature due to the absorption of energy into the low-albedo flooring, where the high-albedo exterior causes multiple reflections.

• 청정기술
• /
• 제13권3호
• /
• pp.195-200
• /
• 2007

본 연구에서는 표면특성에 따른 비균일계 마이크로채널에서의 유속 변화를 조사하였다. 비균일계 마이크로채널은 PDMS와 soft lithography를 사용하여 제작하였고, 마이크로채널의 내부 표면 중 아랫면만을 allyl alcohol로 증착하여 친수성을 띠게 하였다. 채널의 길이는 10, 20, 30 mm, 너비는 100, 200, $300\;{\mu}m$로 각각 제작하였으며, 채널 내 전기영동에 의한 흐름을 생성하기 위해 외부전압을 가해주었다. 그 결과 동일한 세기의 전기장과 밑면의 친수성 정도가 동일할 때 유속은 같았다. 이는 이론적 결과에 부합하고, 연구가 신뢰성이 있다는 것을 뒷받침할 수 있었다. 같은 친수성을 갖는 밑면일 때 채널의 너비가 증가할수록 유속도 증가하고, 친수성 정도가 큰 채널이 작은 채널보다 유속이 빨랐다. 이 결과는 밑면의 친수성 정도에 따라 채널 유속을 조절할 수 있다는 것을 의미한다.

• 지역사회간호학회지
• /
• 제33권3호
• /
• pp.269-278
• /
• 2022

Purpose: This study analyzed the retention factors of Korean community health practitioners who sustained over 20 years based on a multi-dimensional framework. This study suggests global implications for nurses working in rural or remote areas, even during a worldwide pandemic. Methods: The participants were 16 Korean community health practitioners who worked in rural or remote locations for over 20 years. This study identified nurses' key retention factors contributing to long service in rural and remote areas. This is a qualitative study based on the narrative method and analysis was conducted using grounded theory. A semi-structured questionnaire was conducted based on the following: the life flow of the participants' first experience, episodes during the work experience, and reflections on the past 20 years. Results: First, personal 'financial needs' and 'callings' were motivation-related causal conditions. The adaptation of environment-work-community was the contextual condition leading to intervening conditions, building coping strategies by encountering a lifetime crisis. The consequences of 'transition' and 'maturation' naturally occurred with chronological changes. The unique factors were related to the 'external changes' in the Korean primary health system, which improved the participants' social status and welfare. Conclusion: Considering multi-dimensional retention factors was critical, including chronological (i.e., historical changes) and external factors (i.e., healthcare systems), to be supportive synchronously for rural nurses. Without this, the individuals working in the rural areas could be victimized by insecurity and self-commitment. Furthermore, considering the global pandemic, the retention of nurses is crucial to prevent the severity of isolation in rural and remote areas.

• 보존과학회지
• /
• 제32권4호
• /
• pp.521-534
• /
• 2016

고분은 구조적 특성상 대부분 좁고 밀폐된 공간으로 이루어져 있으며, 고분을 둘러싼 높은 봉분으로 인해 외부 환경으로부터 일부 차단된 공간적 특성을 갖는다. 이러한 공간적 특성은 연중 낮은 온도와 높은 상대습도가 유지되는 환경적 특성으로 이어진다. 연구 대상인 공주 송산리 고분군은 외부로부터 고분 내부로 유입되는 열에너지가 고분을 덮고 있는 토양층과 다수의 연결된 출입구로 인해 열의 흐름이 차단되거나 지연되는 것으로 확인되었다. 이러한 열흐름의 특이성(특수성)은 고분 내부 환경과 외부 환경 사이에 약 2개월의 시간적 격차를 발생시키고 있었다. 또한 고분 외부에서 차등적으로 유입되는 열에너지로 인해 고분 내부의 환경은 수평적, 수직적으로 미세한 환경적 차이가 발생되었다. 고분 내부에서 발생된 미시환경의 차이는 매년 규칙적으로 발생되고 있었으며, 이러한 특성을 활용하여 방위 및 공간에 따른 환경조건과 결로현상 발생위치를 예측할 수 있었다. 또한 최적 보존환경을 유지하기 위해 설치된 강제순환식 항온항습기의 고분 벽화 손상 위험성과 기계적 한계점을 제시하였다. 본 연구 결과를 바탕으로 향후 송산리 고분과 고분 벽화를 보존하기 위한 최적의 공조 설비 방안 및 공간계획수립에 있어 기반자료로 활용되기를 기대한다.

• 한국해양공학회지
• /
• 제32권2호
• /
• pp.84-94
• /
• 2018

Subsea pipelines are designed to transport mixtures of oil, gas, and their associated impurities from a wellhead that can be in excess of approximately $100^{\circ}C$, while the external temperature may be approximately $5^{\circ}C$. Heat can be lost from a subsea pipeline containing a high-temperature fluid to the surrounding environment. It is important that the pipeline be designed to ensure that the heat loss is small enough to maintain sufficient flow from the unwanted deposition of hydrate and wax, which occurs at a critical temperature of about $40^{\circ}C$. Therefore, it is essential to estimate the heat loss of a subsea pipeline in various circumstances. In previous studies, overall heat transfer coefficient(OHTC) formulas were considered only for a single soil type. Thus, it is difficult to characterize the OHTC of the actual seabed with multiple soil layers. In this paper, an OHTC formula that considers multi-layered soils is proposed for more precise OHTC estimation.

• Journal of Mechanical Science and Technology
• /
• 제14권11호
• /
• pp.1216-1224
• /
• 2000

The collapse pressure of tubes is determined experimentally by Tschoepe and Maison for various materials with different geometries. The results are compared with those obtained by ASME Codes UG-31 and UG-28. A collage pressure is the pressure required for the incipient yielding stress of the tubes with and without ovality. This collapse pressure is compared with the experimental results by Tschoepe and Maison. The present investigation is towards finding the collapse pressure required to bring the entire wall of tubes into a state of plastic flow for the pipes, with ovality and without ovality. This collapse pressure is compared with the collapse pressure obtained through experiments in the present investigation. The experimental results are compared with the pressure obtained by FEM(finite element methods). The FEM results are then compared with results obtained through an approximate plastic analysis of the strain hardening material, SA312-TP304 stainless steel. The structural integrity evaluation is performed for the heat exchanger used in an actual nuclear power plant by using various methods described in this paper. The results obtained by the various analyses and the FEM are discussed. consequently, the paper is oriented towards an actual design purpose of d heat exchanger in an industrial environment, rather than for the purpose of an academic research project investigation.

• 한국측량학회지
• /
• 제26권4호
• /
• pp.415-421
• /
• 2008

본 연구에서는 u-City 건설에 따른 도시 기반시설물의 관리 중 특히 교통시설물의 관리를 위한 센서 기반 서비스 모델을 구축하기 위하여 관련 현황을 분석하고 이에 대한 발전 방향을 제시하고자 한다. 이를 위해 국 내외의 ITS(Intelligent Transport System)의 추진현황을 살펴보고, 이를 통해 제공되는 교통시설물 관련 서비스를 교통흐름관리, 교통정보제공, 도로 구조 형성 3개 부문으로 나누어 분석하였다. 또한 USN 기술의 발전 동향을 살펴보아 미래의 u-City 건설 지역에 교통시설의 이용효율을 극대화하고, 교통 이용편의와 교통안전을 제고하기 위한 센서기반의 교통시설물 관련 서비스 방안을 제시하고자 한다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권4호
• /
• pp.471-477
• /
• 2014

In this paper, a modeling and co-simulation methodology is proposed to predict the radiated electromagnetic interference (EMI) from on-chip switching I/O buffers. The output waveforms of I/O buffers are simulated including the on-chip I/O buffer circuit and the RC extracted on-chip interconnect netlist, package, and printed circuit board (PCB). In order to accurately estimate the EMI, a full-wave 3D simulation is performed including the measurement environment. The simulation results are compared with near-field electromagnetic scan results and far-field measurements from an anechoic chamber, and the sources of emission peaks were analyzed. For accurate far-field EMI simulation, PCB power trace models considering IC switching current paths and external power cable models must be considered for accurate EMI prediction. With the proposed EMI simulation model and flow, the electromagnetic compatibility can be tested even before the IC is fabricated.

• 상하수도학회지
• /
• 제36권5호
• /
• pp.275-287
• /
• 2022

In order to overcome the small scale of Korea waterworks and to achieve comprehensive improvement and innovation transformation, the waterworks integration was reviewed. The effect of consolidation was confirmed by the integration of the water supply business in the southern Gangwon region and the western Gyeongnam region in Korea, such as an increase in the flow rate and a decrease in the production unit cost. After facing management and service limitations overseas, more than 1,000 small-scale waterworks projects in the UK were integrated into 27 waterworks providers, and Japan also revised the Waterworks Act in December 2019 and is in the process of integrating waterworks. It is considered appropriate to promote the integration of waterworks projects in Korea by respecting the autonomy of local governments, but using a participatory method, a win-win method, and a linkage method. For the integration of waterworks projects, three strategies are proposed: First creating a national foundation for integration (revision of the Waterworks Act), Second establishing a waterworks integration strategy led by local governments, Third forming an external consensus and providing incentives for participation.